The biodiversity of the Swedish forest has degenerated since the beginning of the 19th century when fire suppression and large scale logging first occurred. Together with a changed land use, these actions today have had a negative influence on many forest dwelling species, due to gradual reduction of natural processes, successions and different structures from the forest ecosystem. The Swedish Forest Act, together with different environment certifications, have today encouraged private persons and forest companies, among them Holmen Skog, to work actively to improve nature conservation. The aim of this study was to, by field inventories of already existing nature values, literature studies, recommendations from scientific reports and ecological gap analysis as a basis, make a management plan, for a non-production area, to conserve or improve the prerequisites for biodiversity. ?Storskogsberget? is located in the coastal area of Västerbotten County, 35 km from the city of Umeå.

The Swedish FSC standard (Forest Stewardship Council) is a level standard used to certify forestry. All the major Swedish forest companies are using the FSC standard, and approximately 50% of the Swedish forests are FSC certified today. In the essay six items within the chapter on environmental issues and biodiversity are examined: the proportion of protected forest, the proportion of annually burnt clear-cut stands, the number of trees with large diameter, the amount of dead wood, the proportion of deciduous trees within a stand and the proportion of deciduous-dominated stands. The FSC standard states a level for all items, and the purpose of the essay is to analyse whether these levels are supported by research within the field of conservation biology. The validity of the levels of the six items is them discussed to evaluate whether changes are required to the next revision of the FSC standard.

The construction process which is used today while constructing residential buildings has for along time remained unchanged. Unfortunately the development process has gone away frombecoming industrialized and instead most of the work is done at the construction site. In thisrespect this is a worse alternative because the project outcome will be more expensive and theconstruction time will be longer. Skanska?s vision is to have a process which is more like the oneused in small residential buildings which is fully industrialized.The constructing process for residential building involves more parties and therefore it becomesmore complicated.

Forest enterprises have always searched for ways to improve efficiency. For the past few years there has been an emphasis on stock-keeping levels. Increased demand for fresh round timber and the need to decrease the amount of tied-up capital has made the forest industry reduce its inventory levels. This has brought on a higher demand on the timber supply from the forest management districts concerning both delivery in time and assortment output. As a result, the flow of timber has fluctuated a lot with serious consequence for the timber supply during 1994.

The costs of logging and of transportation with truck are dominating the total cost of wood delivered at industry. To support the profitability for the members' forestry the processing and handling with the timber has to be as efficient as possible. Increased length of pulpwood in thinning is one conduct that can result in higher productivity and/or lower costs. The study is scaled as a system analysis with the aim to exemplify the differences between working with 3- and 4-meter as standard length of pulpwood, related to biological aspects, timber receipts, cost of logging and cost of transportation with truck. Important aspects are if the change is technically and biologically feasible and economically profitable.

The purpose of this Bachelor thesis in Economics at Lund University is to try to establish the correlation between the value change of retail real estate buildings in Sweden and macro economic variables. The principal method is the multiple regression model and it is used to estimate the basic model. The basic model is enhanced by estimating some 30 models and the result is two good models. The difference between the basic model and the two better models are small but important. In the lagged basic model, the same variables are used as in the basic model but with different time lags.

It is essential to reuse- and recycles residues to decrease the amount of deposit materials and reach sustainable energy use. Two ways to work towards this is to recycle wood ashes to the forest as nutrient compensation and extract biogas from combustion of biomass.The aim with this study was to decide whether wood ashes that been used for biogas upgrading with accelerated carbonation also can be used as a nutrient compensation in the woods according to recommendations from the Swedish Forest Agency (Skogsstyrelsen).The ashes that were used in this study came from Johan Andersson who works at JTI in Uppsala, who also treated the ashes with biogas. The ashes have, in both untreated and treated condition, been analyzed in this study according to contents of elements, leaching properties, hardening properties and contents of crystalline phases, to evaluate what impact carbonation with biogas has on the ashes.The accelerated carbonation led to hardening of the ash, and decreased amount of CaO- and increased amount of CaCO3. The CO2-uptake also entails a dilution of the elements, and the content of nutrients and trace elements decreases. However the results show an indication of an uptake of S from the biogas to the ash, since the dilution had a smaller impact on S than the rest of the elements.

The increasing oil prices during the last years have made it profitable to use cereal grains as a fuel. When compared with wood, cereals contain higher amounts of Cl, S and ash. The Cl and S content makes the gases from cereal combustion more corrosive than gases from wood combustion. The goal of this master thesis was to find out the variation of Cl, S and ash content for oat grain grown under different conditions. Oats was chosen because in Sweden it's considered as the cereal with the best fuel qualities.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

The main goal with this thesis report was to come up with ideas of how to make the use of energy more effective and thus save money for the company.First a survey was made to find out where and how the energy consumers were divided within the company. The results were then used in calculations to find out how much money that could be saved and how long it would take to get back the investments.There is a big potential in saving money by recovering heat from the UV-lamps with a heat exchanger. It would also even out the pressure in the factory which is a source to heat loss and a cause for discomfort amongst the employees. It?s possible to save 105 000 kr in a year and the money needed for the investments is 600 000 kr.By using the recovery air more effectively the company could save up to 250 000 kr a year in lowered heat purchases, but this would require the use of automatic dampers.If you reschedule the running times for the wood chipper and invest in some kind of load management, for example Sydkraft?s ?Energidirigent? you can save at least 42 000 kr.

This bachelor thesis addresses the problem of appeals against house building in Gothenburg. The thesis investigates whether there is a statistically significant relationship between demographic factors and the occurrence of approved, appealed and revoked permits for new construction of residential buildings in the ten districts of Gothenburg. This is done with a correlation analysis. The report also investigates whether there is a statistically significant regression in the same demographic factors and how these individually affect the average processing time for appeals in the districts. This study is done with a multiple regression analysis.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

Environmental impact and management of energy is a highly topical issue in today's society. Climate impact must be reduced. The Government has set a target to reduce energy consumption in buildings by 20 % by 2020 and 50 % by 2050 compared to the energy use in 1995.With this in mind, we chose to examine how property owners can work on improving energy efficiency in existing apartment buildings. We also wanted to investigate profitability of different increasing energy efficiency measures and the calculation methods and the risk assessment performed by such investments. To tie in with government objectives, we also saw the possibilities of achieving these goals.20 companies were interviewed, of which 14 were property owners and 6 were consulting firms that works with energy efficiency.

Real estate is defined as ground, which is divided into property. Ground means every part of the surface, which is situated within the country. There is no legal definition of property to be found. Property is usually explained as every unit, which legally should be registered in the register of landed properties. To constitute a property the property must permanently be suited for its purpose.