The efficiency of the harvesters work is more often reviewed, than the work of the forwarders. In a local Stora Enso office the differences between the harvesters reported volume of timber, and the actual volume delivered to the industry had been noticed. Therefore, the decision was made to do a review on the forwarders work. The review was conducted together with a worker from Vmf Qbera, who is working daily with wood measurement, in order to get a valid evaluation of the logs. Eight sites were included in the survey, and on each site 50 logs were marked. Approximately one third of the marked logs were pulpwood, and the remaining logs marked were timber.

The Sitting while waiting for sustainability project goal was to make a functional model for a resting chair and to make it by using furniture and artefacts as material. A try of understanding the process of re-design and to use it to design was driving the project through. The result was a prototype made out of a bed frame and 18 pair of jeans and with details made out of leather..

A geographical position and its social, cultural and political context as well as climate and specific physical characteristics define the scope for a landscape design project. This has become clearer for us in our master project where we have made a Design Program for the outdoor environment of Wollo University in Dessie, Ethiopia and analysed and reflected on the work and process. The aim for the project has been to design an attractive and functional outdoor environment for the Campus, based on the inventories and the needs and wishes of clients and users. But, the aim has also been for us as landscape architect students to gain a greater knowledge about landscape architecture and the design process by position ourselves outside our usual context. The method has been open and seeking where the site, literature studies, dialogues with people and our own experiences from the field study in Ethiopia has influenced the work. Wollo University is situated 400 kilometers north of Addis Ababa, in a mountainous landscape. It faces problems of heavy rainfall during the summer, soil erosion, a lack of essential facilities, and is still a construction site with empty spaces in-between buildings and infrastructure.

The last century, forest fires have decreased in frequency due to efficient fire-suppression along with the growth of the industrial forestry. Since 1990, fire has been reintroduced under controlled forms to recreate burnt habitats. Many species that are dependent on, or benefits from, forest fires have increased since fire was reintroduced. The importance of connectivity is often addressed in ecological research. This is particularly important for species dependent on short-lived habitats such as burnt forests.

Our purpose in this paper is to examine if there is any profitability for a company with a factory in the timber industry to invest in a combined heat and power, CHP. Based on analysis and the results that the paper generates, we will give Derome AB a suggestion on how it is a profitable investment or not to installing in a CHP.By investing in a CHP plant, you can get a high efficiency, which means that companies can use their resources more effectively. The Swedish wood industry has by-products of production that can be used for combustion in their boiler which is an advantage.The essay is a qualitative study where we have a case company, Derome AB. In this company, we interviewed two employees who have knowledge in the study. They have helped us to provide information and data about their business.We chose to use the pay-off- and the net present value method, NPV, to see if there are profitable advantages for the investment.

The aim of this study was to develop a simple model for calculating stock costs for bio fuel at Billerud Karlsborg and subsequently recommending a suitable stock level of bio fuel. The stock components considered in the model are GROT (branches and tops), bark, dry wood chips, raw wood chips from barking and sawdust. The calculations are based on a probability distribution of historical deviations between ordered and delivered volumes. The model presents two different ways to manage the supply in case of irregular deliveries. The first way is to stock enough volume to cover the deviations and the second way is to compensate with a quick purchase from the spot market (at extra high purchase prices).

This Master thesis is about a postal- and telegraphic building in Eskilstuna, Sweden. The construction methods for the specific building and buildings in general from the same time are described. The purpose of the report is to describe the loads acting on the building and how it has been built and why it has been rebuilt during the years. After this, possibilities of reconstruction and adaptation for today?s demands can be evaluated.

This study was conducted on behalf of SCA forest AB, Västerbottens forest administration. Timber procurement from non-industrial private forest owners has become an increasingly important part of SCA:s wood supply. The objectives of this study was to report the current forest conditions in the private forests in the county of Västerbotten, analyse the potential for procurement of wood from private forest owners, and provide a basis for decisions on future strategies for timber procurement from private owners.Material and data have been collected from different sources, mainly from Swedish National Forest Inventory and SKA-VB08. This material was the basis for the analysis and calculations performed with the Heureka application PlanWise. This study area was divided into six different analytical areas (Coastal south, Coastal middle, Lycksele, Inland south, Inland north, Skellefteå), where each area of analysis is represented by a number of municipalities.In this study, two scenarios were specified; one describing the current forest management with current harvesting levels and the effects of these assumptions, the second to illuminate what potential there is for future timber harvesting.

The purpose of this thesis is to investigate if vacuum insulation panels are a competitive alternative to traditional insulation.Vacuum insulation has been used as insulation in buildings in Germany and Switzerland for a few years. In Sweden the high-performance insulation material is mainly used in refrigerators, freezers and vacuum thermoses. The development is proceeding well and vacuum insulation is becoming more common in the construction industry. Since it is a relatively unexplored material on the market there are many flaws and problems with the material.The questions we have chosen to answer in this report include an increased knowledge of vacuum insulation, various problems that may arise when handling/installation and the pros and cons of vacuum insulation compared to standard traditional insulation.The methods we have chosen to use in this report is a literature study, interviews with various suppliers and manufactures and calculations to show the differences between traditional and vacuum insulation. Vacuum insulation is 5-10 times better insulation than standard traditional mineral wool insulation, mainly at the beginning of its lifetime.Vacuum insulation panels (VIP) have a service life of approximately 50 years, whereas traditional insulation has a service life of approximately 100 years.

The driving forces from the forest owners point-of-view was studied on a market where several buyers attend to procure round-wood. It was concluded that forest owners prefer personal contacts to other means of communication, but that it is essential that the initial contact is a personal letter on paper. Furthermore, although price is always important, long standing relations is asked for. The buying companies need skillful experienced buyers that can provide more than just quick closures of deals..

This is a study of the insect community associated to the wood-decaying fungus Inonotus radiatus found on Alnus glutinosa trees growing in riparian forests at the northern and southern shores of boreal lakes in the province Uppland. Little is known about this particular bracket fungus and its inhabitants. Insects were reared out at the laboratory from samples of fruiting bodies of the fungus taken at five lakes. During the fieldwork in 2009, data about several environmental variables was also taken. After the rearing period, these variables and their effects over the insects were analyzed.

The Swedish Government has set a target to reduce energy consumption through energy efficiency within the construction and real estate sector. The purpose of the study is to examine how energy efficiency within this sector could affect the district heating volume in the future, on basis of Vattenfalls district heating system in Uppsala.An Excel model has been created to study how energy effficiency measures affects district heating demand in buildings by 2045, based on technical and economicalconditions. Furthermore, an interview study has been conducted to examine incentives for district heating customers to invest in energy efficiency measures.Result of the Excel model shows that the district heating volume of Vattenfall in 2045 is expected to 931 GWh, which corresponds to a volume decrease of 10,6 %. Based on the study?s theoretical framework only 15 %, 1 024 GWh, of the technical-economical potential is assumed to be implemented.

Projekt Wood Westerbotten är ett samverkansprojekt initierat av Exportrådet. Syftet är att öka försäljningen av ämnen och komponenter för trävaruproducerande företag i norra Sverige. Tyngdpunkten har dock hittills varit Västerbotten där projektet startade. Produktområdena är bygg, trappor, fönster, dörrar, kök och möbler. Stommen i projektet är att hitta kunder på en exportmarknad, framförallt England, Tyskland och Benelux-länderna.

Is it possible that by planning in a more sustainable way when building a new area, we can improve our environment?Most environmental problems are created in cities and therefore they should hold the solution. Through a more ecological urban planning a better foundation for sustainable housing could be created.This report follows the process in coming up with a proposal for a master plan for an area in Odense, Denmark. By going through principles for sustainable urban planning made by different organizations and persons and from these extract main principles, a background is founded to continue the proposal from.Denmark works a lot on expanding their green areas, maintain the existing ones and recreate what?s being destroyed as cities expand.

This report is a thesis for collegeengineering program in structuralengineering at Uppsala University andwas commissioned by the Swedishcontractor Svevia. The study aims toprovide an overview of the mostbeneficial bridge material from bothenvironmental and economic point ofview.The life-cycle analysis covers onlycarbon dioxide emissions, since it isthe most spoken of in today?s climateagenda. Furthermore, this study aims tohighlight which parts, of the systemboundary, that contributes to greatercarbon emissions for the wood- and theconcrete bridge.The life-cycle cost analysis wascalculated with a lifespan of 40 yearsand covers the basic cost of investment,operating and maintenance, anddecommissioning costs.The analyzed constructions in this studyare existing projects that are almostcompleted. Both bridges were designed tohandle loads up to 60 tons.