In recent years many cities have seen an increase in bicycle traffic. This is a development that benefits both the environment and the individual cyclist. When the need for bicycle parking is not met several problems arise such as an increase in bicycle thefts, jammed sidewalks and a decreased interest in using bicycles. My aim with this paper has been to answer the question of how to create parking facilities in an urban environment based on cyclists' needs. Through a literature survey, following the method "Trattmodellen" (the funnel model) the question has been answered and divided under the headings cyclist, bike, bicycle racks, bicycle garage and bicycle operators and hosts.

This Master Thesis documents the development of an On Board Diagnosis (OBD-II) interface for remote diagnosis of vehicles. The Master Thesis is part of a project at the company Wayfinder Systems in Lund. The purpose of this thesis was to design a scantool that communicates with a vehicle through its OBD-II port using relevant standards. In order to make the OBD-II interface development easier, a car simulator was first built. Both the car simulator and the OBD-II interface were implemented using a linux computer running a C-program with serial communication with an external electrical interface.

This paper is an event study on Initial Public Offering?s return behavior after the dot com bubble. Cumulative Abnormal Returns are used to measure the performance against a market index. The results suggest that the market correctly prices IPOs in the long run thus upholding the Market Efficiency hypothesis. Moreover, value weighted CARs show that large IPOs are more likely to outperform smaller IPOs, however in the long run there is an unpredictable pattern.

AbstractThe project "Sound and Play" have been implemented in collaboration with the toy company BRIO in Malmo. The purpose of the project was to examine whether and how BRIO in the future could develop toys around sound for Toddlers.The problem formulations that would be answered after completion of the project was "How could BRIO broaden its product range with the help of audio toys?", "How can you combine toys and sounds in an interesting way for children?", "How do you create a toy with sound that is fun for the child, but not annoying for parents?". Currently BRIO only has two toys with sound in this age group.The expression of the toy was going to be a mix of classic and cool and the overall feeling of the toy was going to be explorative and arouse curiosity in the child. This feeling would be communicated through simplicity and joy.

Since some years Linköping has invested in biogas production, mainly from offal's, residuals from food industry and manure. The municipality goes for biogas in the local traffic and in all transportation. It is also possible for private car owners to run their cars on biogas. The purpose of this essay is to perform a cost-benefit analysis and examine if the project has been beneficial from a social point of view. The effects have been identified, measured and monetarily valued. The essay is limited to include the year of 2006 only.

Den globala bilindustrin har under de senaste decennierna genomgått betydande förändringar, vilketskapat ett allt hårdare marknadsklimat. Detta har medfört att strategisk positionering i synnerhet blivitallt viktigare för aktörerna på marknaden. Försäljningen av Volvo Car Corporation och SaabAutomobile till Ford Motor Company samt General Motors under 1990-talet ansågs därför som ennödvändig åtgärd för att säkerställa Saabs och Volvos fortlevnad. Perioden under amerikansk ägandehar emellertid visat sig tuff och knappt ett decennium senare stod bilindustrin för sin kanske störstautmaning någonsin i sviterna av en extrem global lågkonjunktur. General Motor och Ford MotorCompany drabbades hårt, vilket ledde till att det inte längre ansågs ekonomiskt hållbart att behållaförlusttyngda bilmärken som Saab och Volvo.

The demand for biogas as vehicle fuel has risen sharply and there is a great need for increased production. A possible addition of vehicle gas can be produced by upgrading landfill gas which is formed by degradation of organic waste. This thesis investigates the potential of producing vehicle fuel from landfill gas in the region of Biogas Öst.In 2008, an amount of 32 million Nm3 landfill gas was extracted in the region. This level can be maintained for another ten years if the efficiency of gas extraction is improved. The annual production will decrease with time since landfills aren?t allowed to receive more organic waste.

At Volvo Cars Torslanda's paint shop there is a requirement to in a fast and effective way get an overview of the plants capacity. Therefore a capacity template was constructed as a tool for the engineers at Volvo several years ago. This template has during the years become complicated and outdated. Thus this thesis work will resort as a new capacity template, built from scratch. The new template has been built up based on requirements from Volvo and the concept of OEE (Overall Equipment Effectiveness).

This thesis describes the developmentof a device called "Oil Separator"which is used for washing vehicles andparticularly car washing. The devicedeveloped for Mr. Car Bilvård AB inUppsala, the company's work involvespassenger transport and courierservices. The company needs anexternal device that meets theenvironmental standards to wash theirown cars in the premises without theneed to modify or reconstruct on thepremises ground as the premises is ona leased contract.Work began with a preliminary study onthe literatures that describes boththe function and structure ofdesigning the device. A few interviewswith other car wash companies had beenimplemented, and some measurements.After collection of the necessaryinformation the specifications ofcustomer requirement was presented .With these requirements a fewconcepts was generated and weighedusing the Pugh matrix for conceptsselection for further development.The final concept was furtherdeveloped and a design has beenpresented.

When driving hard and cornering on a circuit good control of a car?s roll is desired, so the car reaches steady state quickly but yet in a controlled fashion. This control is mainly given by the combination of the cars springs, shock absorbers and anti-roll bars.The aim of this report is to investigate, analyze and measure a Porsche Boxster?s turn in behaviour and roll dynamics as well as with the aid of simulation results give suggestions for improvement of the previous mentioned combination.Two different simulations were made, one based on a simpler model that was based on an evolved version of the bicycle model in Matlab and one was more advanced model in the simulation software rFactor. Measurements of the real car was made using a GPS-based measurement system.

Extended Producer Responsibility (ERP) is a form of product take-back regulation that requires the producers to manage their products at the end of life. By internalising the products? entire life cycle costs into the market price the ultimate objective of such regulations is to reduce the environmental burden from the products. This Master´s thesis seeks to examine if the total life cycle cost of a product actually is borne by the producer, and if not, predict who will then take this cost. This is done by analysing the market for take-back activities in three different categories of products; electrical and electronic equipment, cars and wind power stations.

SammanfattningSyftet med denna uppsats är att undersöka huruvida det genom en övergång från erfarenhetsbaserade arbetssätt till användning av vedertagna optimeringsmetoder finns möjlighet till kostnadsbesparingar för ingående lager i O-fabriken på Volvo Cars motorfabrik i Skövde (SkEP).SkEP dimensionerar idag sina lagernivåer på erfarenhetsmässiga grunder, vilket enligt teorierna inte är helt optimalt ur ett kostnadsperspektiv. Det antas därför att det kan finnas en stor förbättringspotential om SkEP istället börjar använda optimeringsmetoder för att beräkna lager- och orderstorlekar. SkEP upplever i dagsläget inte några större problem, däremot villde veta hur pass bra deras lagernivåer egentligen är. Motiveringen till varför just O-fabriken är intressant är att cylinderhuvudena som tillverkas där är de enda komponenterna som påverkas av den aggregerade slutkundsefterfrågan och därför även kan tillämpas som typexempel vid optimering av andra komponentlager.Metoden som används i uppsatsen är i första hand kvalitativ primärdata i form av intervjuer och observationer samt till viss del sekundärdata, i form av kvantitativ information från SkEPs interna datasystem, CDEC, och en teoretisk studie i ämnet lagerstyrning.Uppsatsen börjar med en teoretisk genomgång av ämnet, vilken till största del bygger på professor Stig-Arne Mattssons publikationer. Där tas de beräkningsmetoder som används i arbetet upp, så som Kapitalbindning, EOQ, SERV2 och beräkning av säkerhetslager.

This is a graduate work at the Swedish University of Agricultural Sciences, The Department of Urban and Rural Development, Ultuna. The purpose of this paper has been to find out and describe principles for designing parks that offers good recreational and aesthetical values and require little amount of carbon dioxide emissions during their maintenance. The purpose has also been to see if it's possible to use city wastewater in some extent to assure the plants water supply and to find other means to make it less necessary to use purified water for watering. Recently made studies as well as older ones show how important green areas are in dense city structures both from a health and a climate perspective. Trees and other plants adsorbs different forms of air pollution and can also lower the temperature in the surrounding area through their transpiration.

In this thesis a transport system is sought after thatif realised in the city of Uppsala could provide bothwell-being to all its inhabitants and sustainability,here jointly refered to as liveability. It is found thatthe car dominated transport system that is inoperation today provides two fundamental values,namely accessibility in both time and space, whichsets it apart from other transport solutions. Thesetwo values are of immense importance for theliveability in our modern world. On the other handthe car dominated system decreases the liveabilityof Uppsala in several different ways. Some of theseproblems, it is argued, could be solved within thecar system, through the adoption of moreenvironmentally friendly cars etc., but otherproblems are inherent in the car system and willremain no matter what changes are made.

The challenges facing low voltage grids are rising as an increasing number of domestic houses transition from fossil fueled heating to electricity based heating. Several environmental goals and visions have the same transition from fossil based power to electricity based power in mind for the transportation sector. One of the most important tools for this transformation is widely regarded to be the electric vehicle. With the demands of the electric vehicle pressuring the power grid, several questions arise regarding the growth of the electric vehicle market and what repercussions it may have on the grid. This paper focuses on a typical low voltage grid in southern Sweden and what effects a growing electric vehicle market may have on it. Through computer-assisted simulations based on several future scenarios regarding the EV market, this paper finds that few modifications and reinforcements are needed on this particular grid within the next 10 to 15 years.