SammanfattningTitel: Hur pa?verkar Gerillamarknadsfo?ring Generation Y? A?mne/Kurs:  Fo?retagsekonomi - KandidatuppsatsHandledare:  Lars HaglundNyckelord: Marknadsfo?ring, Gerillamarknadsfo?ring, Generation Y, Annonsering, Word-of-mouth, Buzz- marknadsfo?ring, varuma?rkesattityd, varuma?rkesengagemang, engagemang online, kommunikation.Bakgrund: Marknadsfo?ring handlar om att skapa och utveckla lo?nsamma kundrelationer. I dagens samha?lle sa? sker marknadsfo?ring runtom omkring oss hela tiden. Pa? grund av detta har Generation Y utvecklat strategier som automatiskt sorterar bort o?verflo?dig och ono?dig information.

Lattelement AB in Ornskoldsvik is one of the leading companies in Sweden in composite elements in walls, floors and roofs in particular. The company supplies elements to buildings located with a wide geographical variation, which means that the products are subjected to very different climate with regard to snow, wind and humidity. This places high demands and requires the elements to withstand large variable loads.The elements are made of lightweight beams with flanges of structural timber and beam webs made of OSB. These are bound together by nogging pieces with the same kind of structure. On top of the beams a nailed and glued plywood is added to absorb compressive forces and on the underside of the element a sheet of steel is added for tensile absorption.These elements are then attached to the building framework in different ways depending on the particular element height, loads and the structual supporting material of the frame work.

I denna studie underso?ks vilken inverkan kulturskillnader har pa? kunskapso?verfo?ringsprocessen o?ver nationsgra?nser i mindre svenska fo?retag. Detta go?rs genom en fallstudie av det svenska elektronikfo?retaget CrossControl, som nyligen startat en fabrik i Malaysia. Efter att ha observerat att det finns viss problematik med att bli ett multinationellt fo?retag sa? sa?g vi ett behov av att underso?ka om na?gra av de ma?nga hinder som finns vad ga?ller kunskapso?verfo?ring kan kopplas till kulturella skillnader.

This thesis has been performed at BAE Systems Hägglunds, which is located in Örnsköldsvik. Hägglunds has a wide background of engineering, where they have manufactured all from airplanes to lifting cranes. Currently they only produce track vehicles at Hägglunds, where they manufacture the CV90 and BVS10 models. This thesis concerns the BVS10 which is an all-terrain-vehicle. The main purpose with the BVS10 is to enable transportation of material and personnel thru tough terrain.

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

Forskningsfra?ga? Hur kan mobiltelefonen integreras i detaljhandelsfo?retags marknadsfo?ring?SyfteSyftet med va?r uppsats a?r att urskilja och analysera likheter och olikheter mellan fo?retag och konsumenter ga?llande marknadsfo?ring med sto?d av mobiltelefonen. Detta go?r vi genom att klarla?gga:Konsumenters upplevda va?rde via mobiltelefonenFo?retags anva?ndning av mobiltelefonen som marknadsfo?ringsresurs  MetodUppsatsen har baserats pa? en kvalitativ studie som kommit att anta en deduktiv ansats med inslag av induktion. Vi har gjort den empiriska insamlingen genom semistrukturerade intervjuer da?r vi valt att intervjua tre va?lka?nda fo?retag inom detaljhandelsbranschen samt fokusgrupper.SlutsatsVa?r analys visar att mobiltelefonen kan integreras i detaljhandelsfo?retags marknadsfo?ring pa? olika sa?tt.

Inledning: Som svar p? den l?nga traditionen av mejerikonsumtion producerar varum?rket Oatly alternativa produkter framst?llda p? havre (Oatly, u.?). I ett samh?lle som k?nnetecknas med h?rd konkurrens mellan f?retag och ett marknadsf?ringsklimat med medvetna och kr?vande konsumenter ?r det sv?rt att sticka ut och positionera sig (Hamzah et al, 2014). Oatly anser sig vara en drivande akt?r (Oatly, u.?) i debatten kring mejeriprodukters klimatp?verkan och har en m?ls?ttning att f?r?ndra beteenden i syfte att minska konsumtion av dessa produkter.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

Denna uppsats handlar om hur artisterna Håkan Hellström och Ken Ring konstruerar diskurser kring maskuliniteten i sina musiktexter. Utifrån poststrukturalistiskt influerad teori kring feminism och maskulinitet görs en komparativ närläsning som bildar en tematiskt uppbyggd studie. Utifrån det för artisterna gemensamma temat utanförskap visar studien att utanförskapet hos Ken Ring är relaterat till en känsla av maktlöshet. Denna kompenserar Ken genom att konstruera maskulina diskurser med ett överdrivet anspråk på det som den europeiska kulturen förknippar med maskulinitet och genus. Detta kan kontrasteras mot Håkan Hellström som i sitt utanförskap konstruerar maskulina diskurser där ?omanlighet? och ett kärleks- och sexualitetsbegrepp där ?jaget? blir könsmässigt tvetydligt, står i fokus.

Nematode-transmitted plant viruses (such as nepoviruses) cause great economically losses in commercially important plants such as tomatoes, grapevines and raspberries all over the world. To avoid spread of the viruses the interest in mapping the viruses has increased. One of the important nepoviruses infecting European red raspberries (Rubus idaeus) is Tomato black ring virus (TBRV). TBRV has earlier been confirmed in raspberry samples from Belarus by ELISA and the aim of this bachelor degree project was to confirm these results by amplifying, cloning and sequencing the coat protein (CP) gene of the virus. In total eight viral cDNA samples, from two different raspberry samples, were amplified and sequenced.

In Sweden there are currently two separate guidelines you may use whenperforming calculations on frameworks, BKR and the Eurocodes. Although at theend of 2010 you are not allowed to use BKR any longer and only the Eurocodeswill be viable. The aim of this thesis is to explain how the Eurocodes and EKS work and alsohow they compare to the current guideline BKR. Similarities and differencesbetween these guidelines are also discussed so that the reader will get a betterunderstanding of how the Eurocodes are applied. The areas discussed are asfollows:Principles and adviceSafety ClassesSymbols and IndexesLifespanLoads and partial coefficientThe thesis also deals with the impact that this transition into a new guideline willhave on corporations, guideline costs, education and computer software. As anexample a rough estimate on what costs this transition will create on a companywith 20 employees is also included. Calculations have been performed in order to investigate how the design valuesdiffer between the two guidelines, the Eurocodes and BKR.

I jordbävningsdrabbade områden är stabilisering av byggnader en avgörande del i husens utformning. I många av dessa delar av världen lever stora delar av befolkningen i fattigdom med begränsad tillgång till resurser och moderna byggtekniker. Byggnader i jordbävningsdrabbade områden förstärks i olika mån, beroende på jordbävningsfrekvensen och deras magnitud. Staden Arusha i utvecklingslandet Tanzania är ett sådant område som drabbas av små till måttliga jordbävningar, då och då. Där förstärks byggnader med s.k.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

Denna studie baseras pa? ett intresse att underso?ka fo?ra?ndringar och likheter inom marknadsfo?ring av kataloghus mellan 1960-2010. Genom en litteraturstudie och en utfo?rlig studie av sma?huskataloger under denna femtioa?rsperiod har vissa slutsatser kunnat dras. Resultaten visar ba?de pa? likheter och skillnader i marknadsfo?ringen.

Vi lever idag i ett samha?lle fullt av obalanser. Det ga?r att se hur ett konsumtionssamha?lle va?xt fram, grundat i en o?kad tillfredsta?llelse o?ver materiella ting. Ett samha?lle som besitter oha?llbara verktyg och ideal fo?r att skapa va?lsta?nd, och i sin tur har negativ pa?verkan pa? miljo?n.