Micronic Mydata AB utvecklar och tillverkar maskiner för att automatisk montera elektroniska komponenter på kretskort, s.k. ?Pick and place? (PnP) maskiner. Komponenterna blir lokaliserade och inspekterade optiskt innan de monteras på kretskorten, för att säkerhetsställa att de monteras korrekt och inte är skadade. En komponent kan t.ex.

Milk ejection in dairy cows can be inhibited if oxytocin is not released from the pituitary gland. The problem with inhibition of the milk let down is not new, but has recently regained interest. It is observed during different types of emotional stress, for example when cows are moved to an unfamiliar environment, during oestrus, changing from suckling to machine milking or when being milked for the first time. The aim of the study was to examine the extent of cows with disturbed milk ejection in Sweden. A survey was sent out to 1000 dairy farmers in order to collect data about herd size, housing systems and routines at calving and milking.

Due to a constantly increasing competitive pressure it is of great importance to constantly strive for improvements in order to gain competitive advantages. Lean Production is a concept that has been introduced with the aim to minimize waste and increase profitability. The purpose of this report is therefore to investigate how to perform effective planning according to the principles of Lean Production, in companys with customer exclusive products, through a case study at Sandvik Mining and Construction (SMC), and to investigate how SMC kan improve their planning of drifting rods at the production unit in Sandviken.The study started by creating a theoretical framework, to describe the subject planning and planning based on Lean Production. This frame work constituted the base for the case study which took place at Sandvik Mining and Construction, and also for the model and planning tool that has been introduced.The result of the study is partly a general model with factors that contribute to a more effective planning. These factors has beed identifed as SMED, which focuses on reducing set up times and in the end to facilitate the planning.

Aim: The aim of the study was to investigate 1RM and what power could be generated in bench-press and half squat concentric at certain percentages of 1RM. Special interest was put to evaluate men (M) and women (K), strength trained (ST) verses non strength trained (EST) in generating absolute power as well as power relative to 1RM.Method: In total 59 subjects mean (± SD) age 24.9 ± 4.1 years divided into four test groups: 20 male non strength trained GIH-students (EST M), 20 female non strength trained GIH-students (EST K), 10 male strength trained - sprinters on national/regional level (ST M), 10 female strength trained - sprinters (ST K) on national/regional level. They did two tests on 1RM and power in events of concentric bench-press and half squat in a Smith machine. In the first test session 3 ? 5 lifts were made to measure 1RM in each event.

Sedan införandet av bredverkande insekticider har frukträdsspinnkvalster, Panonychus ulmi orsakat skada på äppelodlingar i stora delar av den tempererade världen. Kemiska acaricider utvecklades först som en lösning, men deras höga toxicitet och kvalstrens förmåga att bilda resistens har gjort dem omoderna. En lösning på problemet är sprutning med oljeemulsioner, som främst har en fysikalisk verkan. Oljorna tillverkas av antingen mineraloljor eller vegetabilisk oljor och används traditionellt till bekämpning av övervintrande ägg på våren. För att bekämpningen ska vara effektiv krävs dock att den utförs när äggen är som känsligast. Äggen hos P. ulmi blir känsligare ju närmare kläckning de befinner sig.

With recent technical development computer aided design and manufacturing has taken amore important role in the product life cycle. New business segments such as Product/ServiceSystems and remanufacturing is emerging. This development demands better control of theproduct data throughout the entire product life cycle. Computer aided design is widelyrecognized and used within the manufacturing industries and in recent years the importance ofDigital manufacturing has increased. One part of Digital manufacturing is paperlessproduction which involves all orders and working instruction shown for example on a screenrather than on a piece of paper.

SammanfattningSyftet med studien var att undersöka om det fanns någon skillnad i muskelaktivitet ivadmuskulaturen när olika eller inget vadskydd användes vid vadpress. Jämförelsegjordes mellan vadskydd (A), stickat av ett modifierat polyolefingarn och ett tillstickningen identiskt och utseende näst intill identiskt vadskydd (B) av polyamid,samt utan vadskydd.Testgruppen bestod av 13 män från militärhögskolan i Halmstad. Testpersonernagenomförde vadpress i smithmaskin* på en belastning av 50% av 1RM*.Muskelaktiviteten mättes med hjälp av sEMG* och tre mätningar per persongenomfördes. Det första utan vadskydd, andra med vadskydd A och det tredje medvadskydd B. Resultaten visade ingen signifikant skillnad i muskelaktivitet mellan användandet avvadskydd A och vadskydd B eller mellan vadskydd A och utan vadskydd.Mätmetoden sEMG är känslig och kan ha gett missvisande resultat. Fler studierbehöver göras dels angående skillnad i muskelaktivitet och dels för att testavadskyddens eventuella andra egenskaper, positiva eller negativa.

Holmen Skog is one of the largest forestry companies in Scandinavia and they depend heavily on a large network of forest roads for production and logistics in connection to their forestry operations. The company recently introduced a new system for planning of road management. The system will also be developed with the intention to facilitate the monitoring of actions performed by road contractors. This report will provide information to support future decisions regarding further development of the system, after its introduction. In addition to a presentation of results from interviews, the report also provides a smaller study of the different subjects associated with roads, process work and process development. The study is largely based on interviews with road contractors that perform work for Holmen Skog today.

The purpose of this report is to make an evaluation of the self-monitoring for scarification which Stora Enso is using and this study deals with the effects and importance of scarification. A comparison is made in this study with the purpose to highlight any differences between some of the leading forestry companies and significant forest organizations in Sweden. The companies represented in this report are Korsnäs, Mellanskog, SCA, Sveaskog and Södra. In the beginning of this study an interview form was set up together with Daniel Forsberg at Stora Enso. Stora Enso is the head object of this report and seven interviews were made within that company. At the other companies only three interviews were made within each one, with an exception to Mellanskog who wished four.

The purpose of this report is to make an evaluation of the self-monitoring for scarification which Stora Enso is using and this study deals with the effects and importance of scarification. A comparison is made in this study with the purpose to highlight any differences between some of the leading forestry companies and significant forest organizations in Sweden. The companies represented in this report are Korsnäs, Mellanskog, SCA, Sveaskog and Södra. In the beginning of this study an interview form was set up together with Daniel Forsberg at Stora Enso. Stora Enso is the head object of this report and seven interviews were made within that company. At the other companies only three interviews were made within each one, with an exception to Mellanskog who wished four.

Hur resonerar potentiella kunder kring inköp av produkten som ens företag tillhandahåller? En av de främsta frågorna hos en marknadsförare, men också en fråga som är aktuell i vår marknadsekonomi i stort. Konsumentbeteende är därför ett givet fält inom företagsekonomin. Men hur går det till när konsumenten är ett företag? Vilka aspekter är viktiga och varför? Vilka marknadsföringsinsatser bör genomföras utifrån denna adderade förståelse? Det är utgångspunkten för denna uppsats.

During the spring semester of 2012 did Petra Hollsten independently a thesis on reducing the environmental impact of capsule for coffee, tea and chocolate. The work was performed at Karlstad University, Faculty of Technology and Science under the Bachelor of Science program in innovation, technology and design. The project's scope is at 22.5 points.The employment for this project is the company Löfbergs Lila AB in Karlstad. Supervisor at the Principal has been Maria Herou Wallner and Sandra Lyxell, product managers. Supervisor at Karlstad University is Monica Jakobsson, lecturer and program leader for innovation and design engineering program.

Until 2020, 49% of Sweden's use of energy must derive from renewable sources. Greenhouse gases must as well decline with 40% compared to 1990 as a part of Sweden's 16 environmental objectives. Biogas is part of the effort to achieve these objectives, but as the demand for biogas increases, more substrates are needed to meet the demand. The purpose is to investigate the conditions for pea residue as substrate by performing lab-scale mesophilic digestion with different fractions and notch lengths and then to summarize pea residue as a substrate for biogas production. During anaerobic digestion, 1000 ml bottles were used as reactors for digestion.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

The purpose of this report is to make an evaluation of the self-monitoring for scarification which Stora Enso is using and this study deals with the effects and importance of scarification. A comparison is made in this study with the purpose to highlight any differences between some of the leading forestry companies and significant forest organizations in Sweden. The companies represented in this report are Korsnäs, Mellanskog, SCA, Sveaskog and Södra. In the beginning of this study an interview form was set up together with Daniel Forsberg at Stora Enso. Stora Enso is the head object of this report and seven interviews were made within that company. At the other companies only three interviews were made within each one, with an exception to Mellanskog who wished four.