Emotron is a company specialised in developing, producing and marketing equipment to con-trol, monitor and protect processes and machinery driven by electric motors, with an applica-tion focus. Examples of uses for their products are fans, pumps, lifts and cranes.The project is to look at Emotrons end of line test. The company has seen that at the final test-ing there is a bottleneck that restricts the outflow and prevents an increase in the number of tested products.The purpose of this project is to review how Emotrons end-of-line test works today and if there is a possibility to make the test more efficient in such a way that the quality is not at risk, while increasing the outflow of tested products.The projects first step is to look at and analyse what is causing the bottleneck at the end-of-line. When the analysis is complete, the next step is to review whether there is a possibility to solve the bottleneck and if so in what way can this be done. Emotrons most overall objective of the project is to increase the outflow of the number of tested products without jeopardizing the quality.An analysis has been made on frequency inverters, soft starters and shaft power monitors.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

The conditions for a good silage process start with good wheather and choice of crop, then choice of harvesting machinery. The shorter and more mechanically treated crop, the better quality of the forage. (Pauly 1994). This study has examined the variations in chopping length depending on harvest method. Precision choppers works with a rotating chopping cylinder, where the crop is cut into pieces.

Virtualisering av datorer rent generellt innebär att man delar upp hela eller delar av enmaskinkonfiguration i flera exekveringsmiljöer. Det är inte bara datorn i sig som kanvirtualiseras utan även delar av det, såsom minnen, lagring och nätverk. Virtualiseringanvänds ofta för att kunna nyttja systemets resurser mer effektivt. En hypervisorfungerar som ett lager mellan operativsystemet och den underliggande hårdvaran. Meden hypervisor har virtuella maskiner sitt egna operativsystems kärna.

The costs of logging and of transportation with truck are dominating the total cost of wood delivered at industry. To support the profitability for the members' forestry the processing and handling with the timber has to be as efficient as possible. Increased length of pulpwood in thinning is one conduct that can result in higher productivity and/or lower costs. The study is scaled as a system analysis with the aim to exemplify the differences between working with 3- and 4-meter as standard length of pulpwood, related to biological aspects, timber receipts, cost of logging and cost of transportation with truck. Important aspects are if the change is technically and biologically feasible and economically profitable.

This thesis was conducted at Linköping University and SAAB Aerostructures, Linköping, and focuses on the automation of flexible fixturing in machining applications. At Linköping University a project called "Koofix" is conducted with support from Strategiska stiftelsen and several manufacturing industries including SAAB Aerostructures. The purpose of this project is to develop a more cost-effective, flexible, technique for fixation of workpieces during processing and assembly.Fixtures are an important part during the machining process, especially if you process the parts with high accuracy. Today a large number of fixtures are used at SAAB and they would prefer to reduce the number of fixtures by using flexible fixtures instead. SAAB uses one fixture for each article and this result in a high fixture cost and it also takes time to design and construct a new fixture.There are several advantages with using a flexible fixture such as that you can process workpieces with different length, height and thickness in the same fixture.

This master thesis has been performed at the department of Machine Design at KTH, The Royal Institute of Technology. The thesis has been a part of a global development project in collaboration with Luleå University of Technology, Lund Faculty of Engineering and Stanford University. Corporate liaison and sponsor has been Immerse Global Inc. The project was also performed on sponsorship from the Product Innovation Engineering Program, PIEp. The thesis is a representation of some of the contributions made by the authors.The lack of clean drinking water is one of the key issues facing the world today.

In June 2013 a debate concerning the consumers? right to a label of origin on food packages was held in the Swedish parliament (www, Riksdagen, 2014). The debate was sparked by some food scandals where labelling was falsely used, claiming something that was not true ? the horse-meat scandal, frozen strawberries infected by Hepatitis A, pork sold as beef, etc. These cases were not only wrong in terms of food safety, but also fraudulent and threating consumers? right to fair origin labelling.

The aim of this report is to increase the knowledge and understanding of the problems within the production at AQ Enclosure systems, and thereby achieve a more stable flow throughout the whole process, a better working environment and better competition advantages. The internal flow along with the external cooperation is very important for the company, because it views flexibility and short leadtime as it is the most important competitive means. The part of AQ production that?s been investigated is the manufacturing of ATM-machines, where the costumer is Banqit. This company is a rater small company with about 4 % of the world market of ATM-machines.In order to achieve the aim of the report extensive interviews have been carried out with employees at AQ.

Syfte & problemområde:Syftet med denna uppsats var att undersöka hur dagens vuxna barn upplevt deras uppväxt i en familj med alkoholmissbruk. Jag ville även studera hur dessa personers nuvarande livssituation såg ut, och hur den påverkats av den specifika uppväxten, med en missbrukande förälder.Metod & material:Studien är en kvalitativ intervjustudie, där empirin har samlats in genom intervjuer med fem vuxna barn till missbrukare. Materialet tolkades och problematiserades utifrån ett systemteoretiskt perspektiv med fokus på familjen, och stämplingsteori med fokus på individen.Resultat & slutsatser:I resultatet framkommer det att flertalet av informanterna blev varse om att någonting inte stod rätt till vid 8-9 års ålder. Gemensamt för nästan alla som barn var känslorna av skam och kluvenhet över situationen med en mamma eller pappa som missbrukar.I fyra av fallen så fanns det en önskan om att fly eller hålla sig borta, men samtidigt en ambivalens gällande deras frånvaro, tre av dem kunde känna oro för föräldern eller syskon, medan den fjärde kände förväntningar på sig om ansvar i hemmet. Även känslor av ensamhet, utanförskap och dåligt självförtroende var typiska, känslor som kunde styrkas genom tidigare studier och kan eventuellt tolkas ses som representativa hos barn till föräldrar med alkoholmissbruk.

During the middle of the 18th century the development of Toyota Production System, TPS, started in order to streamline the processes. TPS was based on the principles of assembly line production but unlike previous performers Toyota let the manufacturing be constantly affected by demand. At the end of the 18th century TPS was described by Womack and Jones in the book "The machine that changed the world - the story of lean producion" where TPS got the name lean. The principles behind lean is to maximize customer value and eliminate waste which means making products and services more valuable to the customer. 1Lean was for a long time a philosophy and an approach limited to industries and production based companies.

This EEF-project is a part of a larger project at SLU, Division of Reproduction, Dept of Clinical Science, with the intention of developing and evaluating new methods for the assessment of stallion semen quality. Over the last 10 years there has been an increase in the use of artificial insemination with cooled semen in Swedish horse breeding. At the same time, foaling rates have decreased. This has lead to a need for new and better methods of assessing the quality of stallion semen. This EEF-project was based on an objective method to calculate motility, with QualispermTM, in fresh and cooled stallion semen, and after selection. Today sperm motility evaluation is mainly done subjectively by visual assessment with a light microscope, and the correlation between these motility results and fertility have varied.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

This master thesis was conducted at Motala Wire Works Ltd (MWW) in Motala during the autumn and winter of 2007-2008. The thesis named ?Future layout of Motala Wire Works? focuses on making a better planed layout for the factory, which also take in to consideration future changes.Motala Wire Work produces wire mesh products of varying sorts for the white goods industry. The factory was started by Electrolux during the 1950?s.