Interoperabilitet blir viktigare och viktigare för Sveriges del, även för funktionen sjukvård. Denna uppsats kommer att behandla likheter och skillnader mellan sjukvårdsdoktriner, handböcker och reglementen med NATO:s och framförallt Norges motsvarigheter, för att undersöka om den svenska Försvarsmakten sjukvårdsorganisation är interoperabel, och för att finna saker som kan förändras för att öka effektiviteten och interoperabiliteten. Under uppsatsen dras slutsatser som att svenska Försvarsmakten tagit åt sig stora delar av de kunskaper som NATO tidigare har gjort. Sverige ?kopierar? delar av NATO:s doktrin för sjukvård, NATO AJP-4,10 Allied joint medical support doctrine.

Varje år drabbas 30 000 svenskar av stroke, vilket innebär stora personliga omställningar och stora kostnader för samhället. Den mest effektiva behandlingen, trombolys, måste ges så snart som möjligt för att ha god effekt.  Samtidigt som det är av största vikt att ta reda på om patienten har några differentialdiagnoser som gör behandlingen riskfylld.Den här studien undersöker hur strokekedjan går till och vilka faktorer som påverkar beslutsfattandet. Studien är baserad på etnografiska fältstudier på fyra svenska sjukhus och materialet är analyserat med metoder från sammansatta kognitiva system och målorienterad design. Resultaten visar att trots olika organiserade strokekedjor på de olika sjukhusen är processerna desamma och direkt kommunikation är mest framgångsrik för att effektivt sprida information mellan dem. Neurologjouren är viktig roll som, liksom resten av aktörerna i strokekedjan, ständigt balanserar sitt beslutsfattande mellan effektivitet och grundlighet.

AbstractObstacles or opportunities? ? A study of the experience of collaboration of social welfare secretaries and school staff.The purpose of this study is to illustrate the importance of the work with children and youth through the joint efforts between different authorities. The study deals with the collaboration between the social services and schools in the Ludvika municipality. The objective of the study is to investigate how teaching personnel and headmasters in compulsory schools and the social welfare secretaries in Ludvika, experience the collaboration, and how this works. On the basis of the objective, we have formulated some relevant questions; To what degree are schools aware of the model of collaboration, which is the basis for collaboration within the municipality, and are there any differences in awareness between different categories of employees? Other questions deal with differences in how the social services and schools experience the collaboration, discrepancies between different schools in this regard and if the respondents? experience any obstacles and/or opportunities by the collaboration.Collaboration is, and has been, a pressing issue for a long time in the public debate.

This report describes the construction work of a radar antenna for the radar systemCARABAS. CARABAS is a long wave airborne ground radar that has been developed bySAAB Microwave Systems and will now be mounted on a small helicopter, Schweizer 300.The antenna should be able to fold up and down. When the radar is in use the antenna islowered and under transport, start and landing the antenna is folded up. An emergency dropfunction should also be included in the design of CARABAS III.The extent of this report includes construction of the antenna, frame structure attached to thehelicopter, mechanism for folding the antenna up and down and mechanism for emergencydrop function. The mechanical design of the antenna and frame structure is based on modaland stress analysis, vibration measurement of Schweizer 300 and frequency analysis, andcalculations regarding aerodynamic drag and mechanics.The exciting frequencies of the helicopter and accelerations at those frequencies weredetermined by vibration measurement and frequency analysis.

Denna magisteruppsats redogör för en anpassning av COCOM (Contextual Control Model) till flygledningsdomänen. COCOM är en modell som kan användas för att beskriva och förutse kontroll hos operatörer i komplexa system. En central del av modellen är begreppet kontrollnivå vilket beskriver hur graden av kontroll hos ett JCS (Joint Cognitive System) beror av och påverkar de parametrar som beskriver dess prestation. Fokus i denna uppsats ligger på det JCS som omfattar flygledaren i sin arbetsposition.I uppsatsen anpassas Hollnagels generella beskrivning av kontrollnivåer i COCOM till flygledningsdomänen. Till grund för anpassningen ligger en kvalitativ studie i form av observation och intervju av sju operativa flygledare vid en svensk kontrollcentral.

Min uppsats intresserar sig för svenska företag i Argentina. Möjligheten till god vinst gör det attraktivt för företag att operera på den latinamerikanska marknaden varför Argentina blir intressant. Svenska företag har sedan sekelskiftet haft stora affärer i Argentina - ett land som relativt nyligen lidit en svår ekonomisk och politisk kris. Fördjupad kunskap om regionen har blivit allt viktigare. Idag ser den ekonomiska situationen bättre ut för Argentina, situationen är positivare än vad prognoserna förutspått och återigen lockas företag att etablera sig i landet.Uppsatsen problematiserar över hur svenska företag resonerar vid etableringsbeslutet, hur de etablerar sig och hur det sedermera har gått för dem i Argentina.

This report is the result of a thesis carried out at the Department of Innovation, Design and Technology (IDT), at Mälardalen University on behalf of ABB AB Machines.The year was 1988 when ASEA and Brown Boveri formed a joint venture under the name ABB (Asea Brown Boveri).We perform our thesis at the division Discrete Automation and Motion where they primarily develops, manufactures and sells synchronous and asynchronous AC motors and generators.The main purpose of this thesis was initially to write a general packaging instruction, but the priority changed to develop more specific packaging instructions for Rotors, Stator gables, Bearing support and Outer Cover (plates) instead.The work started off to deal with a problem about that the staff had to start its work to grind away rust on the stator gables due to those stored outdoors. The result was mainly an investment in a new gable rack so that the material can be stored inside, as well as a packing instruction as it was originally intended.The problem on the bearing supports were that the staff thought it was demanding and difficult to clean them from the rustproofing they were greased in. If it is not possible to remove all rust protection it can cause the paint to not attach properly. After having compared with similar articles a test were done to order a pair of bearing supports without corrosion inhibitor, which gave good results. This initiative also set in motion a process to do the same for more different items.For special pallet, a survey were made of the process with two different VSM and a calculation of how much ABB would earn at ordering more special pallets than getting the material delivered on the A-pallets.

Increased understanding of the mechanisms that operate in conjunction with the welding of metal surfaces may help to improve existing manufacturing processes, and to enable new products and combinations of materials. The purpose of the project has therefore been to acquire a deeper understanding of what is happening in the bond for steel and for the factors that form the basis for a bond to develop between metals in the production of laminates by pressing. The merge has been done by pressing and the surfaces after the experiments have been studied in detail in the scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and with interferenceprofilometry in Wyko, to provide a greater understanding of the mechanisms that influence the bonding in the interface between metals. The project was limited to contain the materials Docol 1000, HyTens 1200, Aluminum AA3003 and a commercial steel. The parameters varied in the experiments to study their influence closer are temperature, pressure, heat treatment and pretreatment. This has been implemented by pressing with varying temperature and pressure.

To guarantee the customers a job satisfactory executed Sydved has been certified by the ISO 14001 standard. One part of the certification is the standards of soil damages. The soil damages were over represented during 1999 and 2000. It was therefore a need to study the problem in order to see what could be done to reduces these damages. A filed study was carried out on 21 subjectively selected stands from the following five districts: Vänersborg, Falköping, Borås, Jönköping and Åseda. As the study is a descriptive study of the soil damages, their character and extension, only stands were tracks were reported were considered.

Good business relations can contribute to the success of IT-outsourcing, and create new business opportunities. Despite a sharply increasing trend to outsource IT-operations there is a high degree of failures related. The cause may be that some important factors have not been taken into account. The purpose is to investigate elationships within IT-outsourcing and test if specific factors identified by previous research are being concerned in IT-outsourcing relationships and also to investigate the view IT-outsourcing customers and suppliers have on business. Research shows that business relationships are widespread throughout companies. It demonstrated that a small number of business relationships can have a major impact on a company's financial performance and may create stability. Business relationships can be divided into an arm's length relationships and strategic alliances depending on the degree of involvement.

Samhällsutvecklingen går från industrisamhälle till informationssamhälle och Försvarsmakten (FM) går fråninvasionsförsvar till insatsförsvar. Tidigare var det mer regel än undantag att civil teknologi hade sitt ursprung imilitär teknologi, t.ex. Internet. Idag är det precis tvärtom med marknadskrafterna som driver utvecklingen avt.ex. IT i ett högt tempo.

AbstraktHaving influence over questions that concern us is a part of the society that we live in, where every individual have the right to make her voice heard (Danell, 2006). For many decades, the school has had many different ways to give the students influence. Rönnlund (2013) is giving a historical overview of the history of students influence and enlighten us how the influence has changed over time. The influence from the students is very important and it is the students right to make their voices heard about things that concerns their work environment but also to affect their curriculum. The education in school should be fitted to every individual student (Danell, 2006).   According to Aaron Antonovsky (2007) our wellbeing is based on that we all can take part and deicide about the things we are meant to do.

This essay is a comparative research between pupils' experience of how the headmaster, teachers and other school staff interpret and apply the democratic education. The results are based on a survey carried out in senior high school, as well as interviews with the school staff. The democratic education charge has a long history of Swedish school system and is the basis for the maintenance of a democratic society. Both policy paper of state investigations and researchers in the field, regard to school as the primary and unique instance in order to promote and develop democratic skills in children and young people. However, it is shown that those who come out from school lack of knowledge and awareness of democracy and the will to speak their mind.

As a result of the so called ?Million Program? between the years 1965 ? 1975 the design-build contract had its breakthrough in Sweden. Since then, the contract form has become increasingly common and now holds a strong position on the Swedish market. In design-build contracts it?s usual that the design and production time is overlapping.

This study analyses the economic consequences due to ethanol production in Eastern Sweden. The analyses consider the cooperative and the farmers as one vertically integrated company. The area that found the market in this study is illustrated in figure 1. The analyses assume that all members act jointly with the objective of maximizing joint profits at the farm level as well as at the cooperative firm. A mathematical model is created to calculate the optimal use of arable land.