Linux is a growing operating system in embedded systems. Today, Linux is not only in heavy servers but also in cell phones, PDAs, cameras and other devices running on battery power. While current technology is more energy efficient, more and more technologies are implemented into a single unit resulting in an overall increase of power consumption.Low power consumption is an increasingly important feature of a system today. Lower power consumption means lower costs, less environmental impact, and longer life for applications that runs on batteries.This work compiles methods to reduce power consumption of Linux systems. The work includes examining whether the available opportunities are platform-specific or of a more general nature.

Uppsatsen utgo?r en vetenskaplig bearbetning pa? hur en specifik kundkrets interagerar med manualer i digital miljo? och hur man kan designa integrerade hja?lpfunktioner till ett datasystem. Fo?retaget Aviolinx har utvecklat flyghanteringssystemet RAIDO, som anva?nts som case i denna studie. Forskningsfra?gan som sta?lls a?r hur man kan designa integrerade hja?lpfunktioner i ett datasystem sa? att anva?ndaren fa?r ra?tt information vid ra?tt tillfa?lle, i ra?tt ma?ngd.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

Mobile Arts have a technical platform for handling maps and community-featured Points of Interest in cellular phones, where the users themselves can share locations with other users either in groups or public. Development of the platform regarding network communication has been included in this paper. The work evaluates different feasible business models regarding packaging the platform as a commercial application and also faces issues users have when using the product. Even if users found maps and POI interesting and cool in cellulars, the technical difficulties and lack of product focus during beta testing, were present. Therefore, the writers recommendation is more development of the platform and using a business model where Mobile Arts deliver to existing communities.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The purpose of this paper is to carry out a domain analysis of Section for Maps and Pictures at Uppsala University?s Library and investigate its business, collection and knowledge organization. Birger Hjørland?s socio-epistemological domain analytic paradigm is applied. As methods, Hjørland suggests eleven approaches, and from them he emphasizes especially the importance of the historical and epistemological approaches.In this paper three questions are analysed.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

A distributed hydrological rainfall-runoff model has been developed using a GIS integrated with a dynamic programming module (PCRaster). The model has been developed within the framework of the EU-project TWINBAS at IVL Swedish Environmental Research Institute, and is intended for use in WATSHMAN ? a tool for watershed management developed at IVL. The model simulates runoff from a catchment based on daily mean values of temperature and precipitation. The GIS input data consist of maps with soil type, land-use, lakes, rivers and a digital elevation model.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

The purpose of this paper is to carry out a domain analysis of Section for Maps and Pictures at Uppsala University?s Library and investigate its business, collection and knowledge organization. Birger Hjørland?s socio-epistemological domain analytic paradigm is applied. As methods, Hjørland suggests eleven approaches, and from them he emphasizes especially the importance of the historical and epistemological approaches.In this paper three questions are analysed.

Precis som titeln avslöjar så handlar rapporten om att ta fram en AJAX-driven webbapplikation för sökning av sålda fastigheter.Gota Media AB har idag tillgång till en stor mängd lagrad information om sålda fastigheter i form av XML som kommer från Lantmäteriet. Enligt Gota Media så finns det ett stort behov av att skapa en sökbar webbapplikation till de nättidningar som de tillhandahåller som presenterar informationen för deras läsare.Syftet är att visa hur utvecklingen kan underlättas med hjälp av ramverket CodeIgniter och att ge svar på ett antal frågeställningar om hur webbapplikationen kan utvecklas för att uppfylla ett flertal krav från kunden.Genom att använda CodeIgniter tillsammans med ett flertal tekniker som Google Maps, CURL, AJAX och jQuery så kunde samtliga baskrav från kunden uppfyllas och ett bra resultat presenteras i form av en fullt fungerande webbapplikation..

Målet med detta examensarbete var att utveckla en applikation på hemsidan www.gratisbio.se som kunde presentera medlemmarnas positioner på en karta. För att erhålla positioneringsdatan utnyttjades redan befintlig teknik som telefonoperatörerna tillhandahöll. Utvecklingsarbetet innefattade ett web-interface där relevant information kunde visas samt själva kartan som ritades upp med hjälp av Google Maps. Klientdelen av arbetet skrevs i html och JavaScript och serverdelen i PHP, utöver dessa användes format som XML, WSDL och JSON för att skicka information mellan klient och server. Den färdiga produkten utformades med Gratisbios allmänna utseende i åtanke. Applikationen använder samma färgschema och design vilket gör att den passar naturligt in på sidan. En utvärdering gjordes också för att se vilka ytterligare tjänster som skulle kunna tänkas vara intressanta för Gratisbio när det gäller positionering av mobiler.

Minimizing power consumption is a critical part of many embedded design projects. Thechallenge is to limit the power consumption of the system and at the same time providesatisfactory service to the user. With regards to microprocessors, the main way of limiting powerconsumption during program execution is to adjust the frequency and the voltage at which theprocessor operates.To enable the implementation of real-time scheduling with support for dynamic voltage andfrequency scaling, an exhaustive study of the Freescale i.MX31 embedded microprocessor isperformed. Specifically, the power consumption relationship to all relevant frequency andvoltage settings is investigated. In addition, to enable frequency and voltage scaling in a real-timeenvironment, a complete timing analysis of proposed voltage and frequency scaling methods isperformed and their suitability for use in real-time systems is evaluated.To integrate voltage and frequency scaling capability into OSE RTOS, a software module hasbeen developed for this operating system.

The aim of this report is to give a description of a diploma work of 20 points that has been performed during the spring 2006 at Ericsson AB in Borås. The report accounts for the problem and procedure during the diploma work. The software used for this project was embedded in a radio link. The RAM in this radio link was divided into several regions where two were used for memory allocation. The current allocation of memory in the radio link was not optimized with regards to performance, security and memory use and the configuration used made it difficult to determine the memory use of the system and the actual memory need.