This report is the result of a master thesis carried out by the author, student at the Royal Instituteof Technology(KTH). The task was performed as a product development process at a companycalled Ameibo AB, located in Stockholm. It is the final task of the studies at the Master'sprogramme Design and Product Realization. The report is structured in a chronological order anddescribes the methods used, the implementation of these methods and a presentation of theresults given from these studies.Ameibo is a company located in Stockholm, distributing films on the internet. The aim of thismaster thesis was to investigate the possibilities of entering the market for portable devices.

This Master Thesis has been carried out in cooperation with Ursus Medical AB (URSUS) which markets, assembles and sells the Rotex Screw Needle Biopsy Instrument ®. The instrument is delivered with an instrument holder. Customers had expressed dissatisfaction over that they needed to use two hands during a biopsy procedure, which resulted in a project to develop a new instrument holder.The project aim was to create concepts for how the new instrument holder should be designed, with focus on the mechanics. The new instrument holder would build on the existing basic principle that the screw needle and the cannula were screwed into the tissue. The thesis work would result in a technical solution and a functional prototype of the chosen concept.To achieve this, a generic product development processes were used and began with a comprehensive literature review.

Most people have been forced to throw away a pot-plant after its death. There are many reasons to the death of a plant, but mainly it?s because its owner forgets it, and therefore fails to water it. The purpose of this project is therefore to develop a product which can prevent this from happening, while the product has to have a low manufacturing cost to be able to compete whit other, similar, products on the market. During the project, a benchmarking has been done to give a clear picture of what the product has to compete with. The directives there are for CE-marking, and which of these who concerns the product has also been looked up.

Today?s market for companies doing statistical surveys is a market consisting of mostly standardized methods where differentiating your company from the competitors is hard. Simultaneously both the society at large and technology in specific is under constant development and everything needs to be done at a faster pace with better precision. One of the companies on the market mentioned above is Tradewell Group AB. During 2008/2009 Tradewell has developed a new method for doing statistical surveys. The method named by Tradewell is called Cellphone Survey System, CSS and include using existing technology in a, for this market, unknown way.

Title:Product abandonment ? A comparative study of five ABB-units Level:Master thesis in Business administration, spring 2011.Purpose:The purpose of this paper is to through a comparative analysis examine how different companies, within the same group, works with product abandonment and what factors influence the process.Problem:How important is situational and product specific factors in a product abandonment process in which the organizational factors are constant?Method:This study is based on primary as well as secondary data where interviews represent the primary data. Interviews, following the same interview guide, were made with five companies within the same group.Result:The results from the empirical studies presented in the text below recurring themes derived from the framework.Conclusions:Our conclusions are that the importance of product specific factors is of significant matters in a product abandonment process, even when organizational factors are constant. We base that on that although the companies are within the same group, under the same strategic direction and constructed according to the same organizational structure the product abandonment process is different for the respective companies.Keywords:Product abandonment, product deletion, product elimination, weak products, ABB .

I dagsläget är det svårt för företag att behålla en stark marknadsposition och utmaningen ligger dels i att regelbundet presentera nya produkter på marknaden och ständigt skapa nya innovationer. Genom att använda sig av Lean Product Development i produktutvecklingsprocessen kan företagen anta utmaningen. Det kan dock vara svårare för små och medelstora företag då de kan ha begränsade resurser. Syftet med denna studie var därför att ta fram en projektmodell för produktutvecklingsprojekt i små och medelstora företag. Studien bygger på kvalitativa forskningsmetoder där sekundärdata samlades in genom både bibliotekskatalogen vid Mittuniversitetet och sökningar i forskningsdatabaser på Internet.

In the spring of 2009 Silva Sweden AB was contacted for a collaboration within the scope of a MasterThesis project. The company had discussed the possibility to develop a device that monitors usermovement during different types of exercise. The objective of this Master Thesis has therefore been todevelop and design a multi training device that records the user?s physical performance during severalactivities. The purpose of the thesis project has been to use scientific methods for product development inorder to design a multi device that supplements Silva?s range of products.The project followed a product development process divided into four phases; Market Analysis, ConceptCreation, Concept Development and Construction.

Barnoveraller är ett specifikt område inom klädesbranschen. Det ligger lång produktutveckling bakom, som har pågår under ett flertal år, vilket har förbättrat slutprodukten vad det gäller material, beläggningar och sömnadstyper.I B-uppsatsen finner du lättare materialinformation, konstruktionsinformation, nationella samt internationella standarder, krav ställda ifrån tre olika företag och utav ?barnoverallskunden?. Det här samarbetet blir vårt försök att bidra till barnoverallsmarknaden.Vi har utgått ifrån vår referens, ett privatägt barnklädesföretag från Bollebygd, Sverige.1 De har gett oss möjlighet att få vara med i produktutvecklingsprocessen och leta förbättringar som kan gynna slutprodukten och 2bseen som företag. Det har också gett oss möjlighet att skänka något litet (en sammanställning) som kan användas av fler företag i liknande bransch och situation.2bseen önskade sig ett samarbete där vår roll skulle innebära en fortsatt produktutveckling på befintliga produkter som i produktion fått ett och annat fel.Childrens clothing is a particular area of clothing business.

Metso Paper offers a front-running range of solutions and services for the pulp and paper industry. At the baling unit, design solutions are developed for manufacturing and handling of pulp bales. The machines are continuously developed to satisfy customer needs. One big step in the development of the baling line was to remove hydraulics from the machines and replace it with electrical motors and pneumatics. This was not done on the folding machine which is still driven by mainly hydraulics.

Launching and marketing a health food product is associated with larger problems than a launch of a traditional food product. There are several sales channels that can be used for a health food product, for example the product can be sold as a traditional food product, natural health food product or as a prescription drug. A smaller company can however experience problems while launching its product as a prescription drug because of the large costs associated with this particular sales channel. There is often no other alternative than to launch the product as a traditional food product, this can however create other problems because of the existing regulations on what can and cannot be mentioned in the marketing of a health food product. The limited amount of information about the product that can be enclosed together with it makes it hard for a company to differentiate and position it on the market.

The Master Thesis has been carried out in cooperation with Silva Sweden AB and the objective was to develop a new product concept within the product category for everyday exercise. The purpose of the thesis was to use and analyze methods and tools which aid creativity and concept creation in order to make method recommendations for future projects.During the thesis a number of customer needs were identified, which in turn were translated into 20 concepts. On a concept decision meeting a pedometer-based concept was chosen for development. The new pedometer is in addition to counting steps also able to measure and calculate the user?s total climbed height during a day and present this graphically in comparison to famous monuments or distances.

This candidate report describes how a group of students can develop a smartphone applicationwithout any prior knowledge in the field. To make the project more realistic there is also a clientwho has requests and wishes regarding the finished product.The document describes the methods used to produce the application and also includesexperiences that the group gained. How the interaction with the client has been performed togain a good understanding of what they wished the product to become is also accounted for.The research questions focus on how the development has proceeded and how one can learnsomething new in a relatively short timespan as a group..

Abstract Title: A conjoint analysis of packaging attributes. How can the attributes of a product?s packaging best look like to attract the consumer? Authors: Linda Granberg & Helena Niklasson Supervisor: Jan Svanberg Department: School of Management, Blekinge Institute of Technology Course: Bachelor?s thesis in Business Administration, 15 credits Purpose: The purpose is to find out how visual and technical attributes on product packaging affects the consumers tendency to want to buy the product. Method: Conjoint analysis and a quantitative survey. Results: When developing a package for a food product we?ve reached the conclusion that it is most important to have clear product information on it.

The technological progress of the world has had a massive effect on how we communicate with one and other, it also has had an big impact on how companies communicate with their customers and consumers. Today you cannot only communicate a ?promise to your costumers and consumers you also have to ?deliver? what it is you promise. Strategic communication is today not only to market your product but to ensure that your strategic communication is shown even in you innovation, design and product development.  This thesis is conducted in collaboration with No Picnic AB.The purpose of this study was to get an insight in how Swedish companies use their strategic communication. We aim on bringing a new point of view of strategic communication with innovation, design and product development also as a communication channel.

In recent years the development of mobile devices has made great progress and today they account for a large proportion of the internet usage. This trend poses new demands on web developers as more companies and product owners want to customize their services and products for this new market. In this study we examine the pros and cons of the strategies desktop-first and mobile-first in the development of adaptive interfaces for the web. The study aims to create guidelines for situations in which each strategy fits well. The purpose of the study is to create an understanding of how these strategies can help developers and product owners to develop adaptive interfaces based on different goals and objectives.