This report is a bachelor thesis work in the field of product development and design. The assignment has been to develop a solution for roof racks, normally used for cars, to fit on the open trailer models FS1425 and Alugance. The project was implemented by Johan Andersson and Victor Karlsson, students at the Mechanical Engineering program with a focus on product development and design at Jo?nko?ping?s school of Engineering, in spring 2012.The client wants to use transport solutions in the same way as roof racks on cars. The user of such a product is assumed to desire simplicity, safety and an attractive design with an appealing price, which has been a challenge during the thesis work.Pre-studies have been conducted to examine the potential competitors and gain knowledge in the research area.

Studies show that activity based costing (ABC) is not widespread in practice even though it has been present in the academic world since the 80's. This thesis examines the reasons for the discrepancy between theory and practice through a case study of a Swedish manufacturing company. The intension is to answer the question of what contributes to the choice of precision in product costing.We found arguments for increasing precision in product costing but not to the extent of a full-scale ABC implementation. The company's estimation of the value of increased precision. In the study three company unique factors were isolated that affected the company's estimation of value; drifting purpose of product costing, historical use of product costing and knowledge about product costing..

This Master thesis has been carried out at Scania CV AB in Södertälje, in collaboration withKTH, The Royal Institute of Technology, Stockholm. The focus of this Master thesis isSetBased Concurrent Engineering(SBCE), with the purpose of answering the questions: what isSBCE, how does it work, and for what purposes is it applied.It was early established thatSBCE is often included as a part of Lean product development,which in its turn is often related to Toyota?s way of working. TheSBCE method includesworking with multiple solutions in parallel, eliminating weak alternatives throughout thewhole process. In opposite to a conventional product development process, where it iscommon one at an early stage tries to identify and choose the most promising alternative.Despite the appearance ofSBCE as a resource consuming method, figures from Toyotaindicates the opposite, thatSBCE is in fact a very effective way of working compared to othermore traditional methods.The process of this Master thesis was divided into three phases.

Purpose: The purpose of our thesis is to analyze the application of models from product branding on job-seeking business students as a way to establish a personal brand.Conclude: We found that the principles of product branding closely resembles those of personal branding and are therefore applicable. The models that build a products brand can do the same for a business student. Thereby we can conclude that personal branding does derive from product branding..

This report summarizes a Bachelor Degree Project in Integrated Product Development,carried out during the spring semester in 2007 by three students at the Product Design Engineering programme at the University of Skövde. The project was performed as an assignment for KinBag ab, a sister subsidiary to Kinnegrip ab in Lidköping, who develop,manufacture and market the golf bag KinBag, a bag with an integrated wheel carriage system. The purpose of the project was to redesign the golf bag to attract a target group consisting of golfers aged between 20 and 40.The layout of the project was as follows: The project began with a feasibility study where different problems were identified with the basis of a market research which eventually was summarized in a dynamic specification of requirements. The feasibility study was followed by a generation of ideas which contained everything from sketches to simple mock-ups with an intensive amount of thoughtful brainwork and information gathering in between. This ledto the development of a number of design concepts, both on an overall level and on different parts of the golf bag.

This thesis is an addition to pictures and animation that has been developed using CATIA V5. The animation and the images are a market basis to test whether the product is of interest in the Nordic market. The thesis is structured with elements of the Fredy Olsson method. In this thesis there is also a short presentation of the company Tylö AB, which been chosen to market test the product. A product definition with the sub-headings; ?Description and use of product?, ?Environmentand users?, ?Economy? and ?Product inquiry?, are the basis for the product.

The high level of competition and the rapidly growing technology development has created new challenges for today's businesses where they are forced to deliver more customized products at a lower price and a shorter time period. This places high demands on the companies' ability to design and develop better products in a more efficient way. In addition to developing products, the design process focuses on securing long-term success for the company by developing nourishing skills. However, to achieve an effective design process the companies must improve their ability to plan as well as use their knowledge base in a more efficient manner. Toyota's product development system is a critical component for companies to address challenges that they?re facing and offers a great potential to create significant competitive advantages.

With recent technical development computer aided design and manufacturing has taken amore important role in the product life cycle. New business segments such as Product/ServiceSystems and remanufacturing is emerging. This development demands better control of theproduct data throughout the entire product life cycle. Computer aided design is widelyrecognized and used within the manufacturing industries and in recent years the importance ofDigital manufacturing has increased. One part of Digital manufacturing is paperlessproduction which involves all orders and working instruction shown for example on a screenrather than on a piece of paper.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Mobile Arts have a technical platform for handling maps and community-featured Points of Interest in cellular phones, where the users themselves can share locations with other users either in groups or public. Development of the platform regarding network communication has been included in this paper. The work evaluates different feasible business models regarding packaging the platform as a commercial application and also faces issues users have when using the product. Even if users found maps and POI interesting and cool in cellulars, the technical difficulties and lack of product focus during beta testing, were present. Therefore, the writers recommendation is more development of the platform and using a business model where Mobile Arts deliver to existing communities.

Exposing products is important in the retail industry and the development is constantly moving forward. Shops usually have a special product, they want to sell more because of various reasons. How to expose that particular product sold most of there are various theories. What this report is about is a theory that seeks to stores use a "decoy". It carried out to see if this theory was still current was that three interviews took place with two store managers and a CEO for various grocery stores.

Abstract Title: A conjoint analysis of packaging attributes. How can the attributes of a product?s packaging best look like to attract the consumer? Authors: Linda Granberg & Helena Niklasson Supervisor: Jan Svanberg Department: School of Management, Blekinge Institute of Technology Course: Bachelor?s thesis in Business Administration, 15 credits Purpose: The purpose is to find out how visual and technical attributes on product packaging affects the consumers tendency to want to buy the product. Method: Conjoint analysis and a quantitative survey. Results: When developing a package for a food product we?ve reached the conclusion that it is most important to have clear product information on it. The consumer wants it to be simple and easy to use, the people under time pressure seeks product with new technology which can save them time..

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.