Sök:

Sökresultat:

87 Uppsatser om Rail - Sida 1 av 6

Värmestrålning för förebyggande av isbildning på strömskenan

Detta examensarbete har utförts med begäran från Trafikförvaltningen. Arbetets huvudmål är att undersöka om det är möjligt att använda värmestrålning direkt mot ytan av strömskenan för att hindra isbildning på en kortare tid då absorptiviteten är som bäst..

Hur ökad fukthalt påverkar pannor

This report is a description of a developed educational simulator over Rail vehicles and its components. The simulator is a hardware-based prototype over a door system on Rail vehi- cles. System specialists and technicians will use the prototype. The Simulator should give the user a technical demonstration on how components work in a door system. The proto- type consists of motor, switch, relay and sensor.

Utbildningssimulator av funktioner i spa?rfordon : Ha?rdvarusimulator med felso?kning pa? do?rrsystem

This report is a description of a developed educational simulator over Rail vehicles and its components. The simulator is a hardware-based prototype over a door system on Rail vehi- cles. System specialists and technicians will use the prototype. The Simulator should give the user a technical demonstration on how components work in a door system. The proto- type consists of motor, switch, relay and sensor.

Levbart transportsystem i Uppsala

In this thesis a transport system is sought after thatif realised in the city of Uppsala could provide bothwell-being to all its inhabitants and sustainability,here jointly refered to as liveability. It is found thatthe car dominated transport system that is inoperation today provides two fundamental values,namely accessibility in both time and space, whichsets it apart from other transport solutions. Thesetwo values are of immense importance for theliveability in our modern world. On the other handthe car dominated system decreases the liveabilityof Uppsala in several different ways. Some of theseproblems, it is argued, could be solved within thecar system, through the adoption of moreenvironmentally friendly cars etc., but otherproblems are inherent in the car system and willremain no matter what changes are made.

Läggning och resning hos ungtjurar i liggbås : inverkan av båsfrontsutförande

Cattle have a species specific movement pattern when lying down and getting up. They need sufficient space for their heads to perform these movements normally. The aim of this study was to investigate the lying down and getting up behaviour of beef bulls at a Swedish farm operation. The hypothesis was that bulls older than 10 months (over approximately 400 kg) were disturbed by a horizontal front Rail and that the time to lie down and get up differed from what can be regarded as normal based on earlier scientific studies. The bulls were Swedish Red and White (SRB), Swedish Friesian (SLB) or crossbreeds of these two, and were kept in a cubicle system with a stall front design where there was a horizontal Rail 40 cm above the stall floor.

Järnvägens banutnyttjandeplanering : nuläge och förbättringsförslag

The Swedish National Rail Administration has changed in the past decade, from its origin after a less dramatic separation from the Swedish State Railways to becoming an authority with its own identity. Today the National Rail Administration is a large organisation with several different departments, each with its own unique function. To operate train services the Railway needs to be ?in shape?, leading to a need for maintenance, reinvestments and new investments. For this purpose, the National Rail Administration carries out public procurement where contractors, who are able to perform maintenance and new construction, submit tenders.

Beslut om betydande miljöpåverkan för järnvägsprojekt : beslutsmotiveringar, åtgärder och regionala skillnader

This thesis examines the reasons to why Railway projects conducted by Banverket (Swedish National Rail Administration) could be expected to cause significant effects on the environment, on which grounds the County Administrative Board and Swedish National Rail Administration base their decisions/assumptions and highlight regional differences between the different Swedish national Rail administrations regions. Total 24 Railway projects, conducted or being conducted, during the time period 2001 - January 2010 have been analyzed and studied. These projects represent eight different measures/activities which are dispersed throughout all five of the Swedish National Rail Administration´s different regions. Swedish legislations demands that the planner of a new Railway project shall first conduct a pre-study and then conduct a public consultation which provides the participants an opportunity to provide input. The County Administrative Board shall then decide if the project could cause significant effects on the environment.

En klimatanpassad järnväg : Långsiktig planering av infrastruktur i ett föränderligt klimat

Global warming is going to affect our society in many ways. One can say that the problem we face has two different sides. One of those sides has received a lot of attention, namely how we can reduce our emissions of greenhouse gases. However, because of the climate system's inertia the climate will continue to evolve over a period, no matter how much we will cut back on emissions. Because of this, we have to start adapting our society to the climate changes that we cannot influence.

Långsiktigt spårväxelunderhåll - Förutsättningar och möjligheter

Due to their complexity and heavy wear from Rail traffic, switches are a sensitive part of the Railway infrastructure and moreover expensive to maintain. Furthermore, increasing Railway traffic not only accelerates the wear rate but also obstructs the necessary maintenance measures. This paper examines the opportunities for a transition to a long-term maintenance strategy in the Swedish Railway network. It contains a study of the maintenance strategy of Banverket, and also analyses statistics of errors in the Railway infrastructure. The survey was completed utilising interviews with infrastructure managers, maintenance contractors, planners of Railway operations and the Banverket material service department.

Integration av en CR-insprutare i enforskningsdieselmotor och undersökning avmultipelinsprutning

SammanfattningI utvecklingen av den encylindriga forsknings-diselmotorn Hatz 1H30 på TechnischeUniversität München har tidigare en ottoinsprutare använts i kombination med ettcommon Rail-system som en temporär lösning. Ett common Rail-system ger möjlighetenatt separera regleringen av insprutningen från de mekaniska komponenterna av motorn.En common Rail-insprutare gör det möjligt att göra flera insprut varje arbetscykel ochtillhandahåller möjligheten att elektroniskt variera timingen av insprutningen.Efter att en marknadsundersökning har gjorts bland huvudtillverkarna av injektorerinköptes en Bosch CRI2 injektor från en BMW M47N-motor. Det förra cylinderhuvudetvar anpassat för en ottoinjektor och var därför tvunget att designas om. En konstruktiongjordes för att fästa injektorn och för att försluta förbränningskammaren.För att styra injektorn behövs ett flertal signaler för att utvärdera vevaxelpositionen ochbetämma insprutstimingen. Behandlingen av dessa signaler och mjukvaran för styrningvar först testade med en AFT PROtroniC motorstyrenhet för sig själv i en provrigg meden signalgenerator.

Tillämpning av DMAIC-metodiken i tjänsteföretag: en fallstudie genomförd på EuroMaint Rail AB

Ett sätt att reducera kvalitetsbristkostnader i ett företag är att genomföra förbättringsarbeten med metodiken DMAIC, oftast använd inom Six Sigma-projekt. Mängden litteratur om DMAIC i tjänsteföretag är mer begränsad än liknande litteratur för tillverkande företag och den litteratur som finns saknas en djupare beskrivning av de olika faser som DMAIC består av. Syftet med examensarbetet är att åskådliggöra hur DMAIC- metodiken kan anpassas för att lösa återkommande problem i en process tillhörande tjänsteföretag. Detta görs genom att utgå från författare med stor erfarenhet inom kvalitetsområdet, Magnusson, Kroslid och Bergman samt Juran och undersöka hur deras definitioner av DMAIC kan anpassas och användas i ett tjänsteföretag. Som strategi valdes att göra en fallstudie på EuroMaint Rail AB, ett tjänsteföretag som utför tågunderhåll för ett flertal svenska tågoperatörer.

Bränslen för fordon och maskiner på Strukton Rail - Miljö- och hälsoaspekter

Spårtrafik är ett miljöanpassat trafikslag. Produktion och underhåll av spåranläggningar är dock beroende av fossila drivmedel. Användning av dessa drivmedel är Strukton Rails främsta miljö- och arbetsmiljöaspekt. I denna rapport undersöks andra drivmedel än de som används på företaget i dagsläget för att finna bättre alternativ ur miljö- och arbetsmiljösynpunkt..

Växelrevision: alternativa metoder vid underhåll av
spårväxlar

Detta är ett avslutande moment på civilingenjörsprogrammet Ergonomisk design och produktion med inriktning mot industriell produktionsmiljö vid Luleå tekniska universitet. Arbetet omfattar 30 högskolepoäng. I framtiden kommer tågtrafiken att köra med ökade axeltonslaster och kortare omploppstider vilket innebär att kapaciteten på järnvägarna måste höjas. Spårväxlarna kommer att utsättas för ökat slitage samtidigt som tiden för underhåll kommer att minska. Som det ser ut idag är det nog svårt att få tider till att utföra underhållsarbete av spårväxlarna så om inga förändringar görs kommer dagens metoder att bli ohållbara.

Mekanisering av häststall

Mechanization of Swedish agriculture started in the beginning of the twentieth century, to be able to have more animals without raising the number of employers. The horse business has not by far kept up with these cost savings solutions. Cleaning out stables and feeding horses are the most time-consuming tasks in horse stables today. The most common way to clean out the stable is still by shovel and wheelbarrow. The clean out process can easily be mechanized through semi- permanently beds with movable walls between the boxes so that the litter can be removed by a tractor or a loader.

Omkonstruktion av hjulvändare

Duroc Rail AB utför underhåll av järnvägshjul till olika järnvägsoperatörer. Duroc har för tillfället problem i verkstaden med en av de två hjulvändarna, dessa hjulvändare har som uppgift att ta emot, växla och vrida hjulpar till ett korsande spår. Hjulvändaren knuffar sedan vidare hjulparet till nästkommande station. Genom att använda sig av en hjulvändare kan ett hjulpar växlas till ett korsande spår och på så vis möjliggöra att ett hjulpar som endast behöver svarvas om kan slippa passera nästkommande stationer. Den hjulvändare som Duroc har problem med har trasiga bälgcylindrar och då det inte finns reservdelar till denne har Duroc valt att man vill omkonstruera eller hitta en ny lösning på hur hjulparen ska vändas.

1 Nästa sida ->