Today when new and harder demands on CO2 emissions are developed, vehicle manufacturers must work to develop new engine solutions to new kinds of fuels to replace fossil fuels. A fuel that could be applied is hydrogen. When hydrogen is combusted only water vapor occurs. Hydrogen is known to be explosive and flammable. These properties are both good and bad for combustion.

Today the competition in the automobile industry is getting all tougher. The technology behind cars becomes more advanced. To get ahead of competitors car companies has to look into new areas of innovation.One important area is vehicle safety. Bigger companies have come so far in vehicle safety that difference between cars more depends on the car type (size) than the technology behind it.There is one area where vehicle safety that still has great opportunities for improvement, which is in active safety. The term active safety states that the car has the ability to identify treats and automatically respond to the treats.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This report is part of the major thesis carried out at Stoneridge Electronics in Bromma,Stockholm during autumn and winter 2005-2006. The background to the thesis is the trendwithin the automotive industry where color displays have become more common for presentationof information to the driver, a trend that has come to the commercial vehicle market. Thepurpose of the thesis has been to evaluate whether programmable logic, with respect to FPGAtechnology, could be suitable for display control and graphics generation of these more complexcolor displays in automotive environment.Within the scope of the thesis the FPGA technology has been investigated, i.e. whatopportunities and threats there are with aspect to environmental and security requirements. Inaddition, the market of FPGAs and pre-built IP-cores has been investigated.

In Sweden the most common type of road traffic accidents involving passenger cars are single accidents (where only one vehicle is involved). The aim of this thesis is to analyse how these accidents occur, and present recommendations on how to reduce the number of deaths. Data has been collected from the Swedish Transport Administration?s in-depth studies of fatal accidents. Road traffic accidents with fatal outcome that happened on public roads during the years 2007 to 2009 have been studied.

Drygt hälften av den svenska landarealen täcks av skog. Av denna areal ägs hälften av privata skogsägare och övrig areal av skogsbolag och det allmänna. Alla som brukar skogen har ett ansvar att värna om den på ett hållbart och uthålligt sätt, detta för att kommande generationer ska kunna ha fortsatt glädje av skogen. Ett viktigt begrepp gällande hållbar utveckling är CR (Corporate Responsibility). Med detta menas att det är viktigt att intressenter tar mer ansvar inom aspekterna: miljö, socialt och ekonomi än den miniminivå som lager kräver.

Handling, loading, transport time and unloading in connection to transport of farm animals affect animal welfare. Induced effects include both psychological and physiological stress responses in animals. The physiological parameters may be measured through blood analysis while behavioural changes often manifest themselves through increased vocalisation, escape attempts and apathy. Physiological parameters are additional parameters of importance when measuring animal stress responses. The handlers behavior during transport has been shown to have major impact on animal welfare and the quality of meat. Animal friendly handling and driving of animals create a more manageable work environment for the handlers. To further increase animal welfare in connection to transport, stables should be built with well adapted drift passage and ramps on the transport vehicle.

In this study a case study was conducted at the Transport Agency. The government agency is seeking better alternatives to its current ways of keeping track of important dates stated in legal documents. The agency wants to explore the possibility for an IT-solution for keeping track on those dates. In the case study change analysis was conducted on the vehicle type approval process. Qualitative interviews were conducted with a section manager, vehicle type and component approvers, and with a system administrator and a system manager at the Transport Agency in Borlänge.

Quadrotor UAVs are self-stabilizing, autonomous flying machines that has recently become more popular than ever. Unmanned Aerial Vehicles have their roots in the military, where they were developed for use in reconnaissance and combat. During the last few years, advances in the fields of electronic sensors, electric motors and microcontrollers have enabled smaller designs and autonomic flight control even for private use. The quadrotor, which is the particular kind of UAV we are looking closer at in this paper, has 4 rotors in an X-like formation. This configuration has many advantages such as good lift capacity, non-complex mechanical structure and serviceability.In this project we aquired a current overview of the domain and determine whether it is possible to construct a quadrotor UAV designed for use in a WISENET sensor network on a low budget and short time schedule.Based on existing community project AeroQuad, a quadrotor is constructed with a budget of about 500 euro.

This master thesis has been carried out on behalf of Stoneridge Electronics AB and is an investigation ofhow intelligent switches can replace the traditionally used direct controlled switches. The concept ofintelligent switches is that the switches contain electronic identification components which, by connectingthem to a network, give the same function independent of the location of the switch. This infers anincreased flexibility and configurability which can be a great advantage in development, production andcustomization in the commercial vehicle industry. Especially in the current situation when commercialvehicle manufacturers provides more and more functions and dashboard configurations.LIN (Local Interconnect Network) is a network protocol introduced in 1999. It is a simpler and lower costcomplement to CAN (Controller Area Network) and is adapted for applications where the demands forbandwidth are lower, for example reading sensors and switchers.

I denna studie utformas en prediktionsmodell för försäljningspriser på skogsfastigheter i Sverige. Syftet är att ge marknadsaktörer ett verktyg för att bedöma till vilket pris skogsfastigheter i Sverige förväntas säljas.Modellen bygger på multipel linjär regressionsanalys av skogsfastigheter sålda av fastighetsförmedlaren Areal mellan 2012 och 2014. De förklarande faktorerna som ingår i modellen är geografiskt läge, virkesförråd, bonitet, befolkningstäthet och huggningsklasser.Modellen lyckas prediktera försäljningspriset med en förklaringsgrad på 90.0 procent, vilket är tillräckligt högt för att målet ska anses vara uppfyllt. Denna studie har utöver prediktionsmodellen också funnit intressanta strukturella samband..