An increasing number of heat pump producers have developed heat pumps that can be connected to solar panels. In this thesis we have examined the possibilities of connecting solar panels to existing ground source- and geothermal heat pumps that has not been adapted to solar panels. During the work process, a prototype plant has been built to compare our theory with the practical results and with our designed sizing tool. The work has rendered in knowledge that will be used to build a sun module that can be easily connect to the existing heat pump system. The existing heat pump, our test plant, has been supplemented by an advanced storage tank used to allow different operating modes.

Clustered Columnstore Indexes (CCI) and In-Memory Online Transaction Processing (OLTP) are two new techniques that were introduced with Microsoft?s new database management system SQL Server 2014.The thesis analyzes these two techniques, describes the theory behind them and also the background information that needs to be known to understand more of the new techniques. Performance tests of the new techniques have been performed to see how much faster response time we can get and less storage we need to use where the result is represented by performance diagrams and a compression diagram. This thesis is a cooperative work with a company called Trimma and the result is used as support to decide if these new techniques could be of advantage for the company.The test consists of five test queries with different purposes. The result is illustrated by diagrams that show the result and another diagram that shows how much the data gets compressed with the different techniques.

AbstractThe dependency of fossil fuels in the transport sector causes large emissions of carbondioxide. This problem can we reduce by using vehicle gas from digested solid manure and leftover of pasture. I have studied the potential for this in the county of Västernorrland. Thepurpose is to investigate how much vehicle gas that can be extracted.One central, large scale digestion and upgrade plant should be placed in Härnösand. Theamount of pasture and manure that is economical and practical available is enough to produce2,7-3,5 millions Nm3 vehicle gas.

Deregulation on the market for agricultural products leads to a more globalised market with increasing price fluctuations. This, in turn, places the farmer in positions influenced by new risks but also improved opportunities. The farmers are faced by uncertainty in terms of financial outcome. To be able to utilise these new market conditions it becomes increasingly important for farmers to continuously follow the price trend, and to develop strategies how to manage the risks exposed by a volatile market. Farmers with different conditions perceive risk in different ways. Hence, their risk management behaviour will vary.

The purpose with this work is to investigate the cost to produce piglet in a case study company. The starting point is going to be the agriwise (www.agriwise.org) calculation which I am going to change and adapt to the case study company. To day the pig market is bad but we have probably reached the bottom. The market has started to rise. It is no business to produce piglets today.

The use of fossil fuels such as coal and gas are a contributor to the global warming. The climate change is a worldwide problem with far reaching consequences that is believed to be very expensive. The United Nations has been introducing a framework convention on climate change. One component of the convention is the Kyoto protocol. The protocol is obligating the developed countries to decrease their emissions of greenhouse gases by 5.2 percent during the time period 2008-2012.

Several technical solutions are ready to step forward as the new generation of propellant, and this report aims to explore the possibility of commercializing fuel cell cars. The report is based on current research and data from today's technology and engineering solutions that are estimated to be commercially realized before 2020.A mapping of today?s different fuel cell options has shown that the most suitable fuel cell option is the Proton Exchange Membrane Fuel Cell, which uses hydrogen as fuel. The report is focusing on a techno-economic well-to-wheel analysis of hydrogen and the energy balance and costs in a system perspective. The basis for this analysis consists of two centralized methods of production, steam methane reforming (SMR), and alkaline water electrolysis.

This thesis is written on behalf of Skanska, Väg- och Anläggning Stockholm Mälardalen, vid Nya Karolinska Sjukhuset i Solna, NKS. The report has resulted in recommendations for the method of soil stabilizations of soil nailing, excavation of slope and fiber reinforced shotcrete, which is the most suitable method from a safety and a cost point at the NKS.The aim of this thesis was to investigate whether fiber reinforced shotcrete increases slope stability, with the focus being on the total stability. The main goal was to investigate which method of soil stabilization is the most suitable for the slopes that are analyzed in this report. Through studying literature, the authors have gained an understanding about the theoretical background for the given problem. Through calculations and analyses of the slopes, safety factors have been acquired.

The purpose of this essay is to investigate if the companies listed on Nasdaq/OMX Stockholm Large Cap use the earnings management phenomenon Big Bath Accounting to a greater extent when a change of management (CEO) is made.Management tends to use earnings management when there is a bonus plan linked to the result of the company. To gain maximum bonus the management will try to manipulate the result in a way that in a long term maximize their utility. Through the earnings management technique Big Bath the management is given the possibility to take one large cost as a one-time expend, even though the cost is supposed to run over several financial years. This, of course, within the legal framework. A big bath may occur when there is an impairment of goodwill, tangible and/or intangible assets or larger provisions for future expense, or both of them at the same time..

Profit in first commercial thinnings of today is hard to achieve. This is because of prevailing pulpwood prices and because of high costs of logging and transport. To reduce these costs higher productivity is advocated. One way to increase the productivity is the use of multi-tree handling harvester heads. The aim of this study was to calculate logging and transport costs in first thinnings, where multi-tree handling has been used.

The purpose of this project is to study Partab's material distribution process, furthermore identify critical problem areas within the company. Further the aim is to provide suggestions to new work procedures regarding material distribution and related processes. Appropriate literature has been used as a support in this process. The main goal of a commercial company is to generate cash flow, and maximize the return on investment. Streamlining material supply and the use of material is a part of this process. Virum and Persson define logistics as: "Logistics is the approach and principles founding the process of planning, development, coordination, organisation, management, and control of material distribution from supplier to user".

Water logistics has long been a problem in order to effectively carry out stump treatment in both thinning and final felling. It is important that the stump treatment? equipment is configured as well as a sufficient amount of water is carried out on the harvester to get a cost? effective treatment. The flow control of the equipment has improved and water can be dispensed more efficient, but still the amount of water on the machine is a crucial factor in the total cost estimate. The knowledge of the tools available to bring water as well as the internal logistics of loading and transport to the felling site is deficient. Increased focus on "smart" solutions to manage water cost is of great importance in order to combat Hetrobasidion spp in both thinning and final felling. The purpose of the study is to describe and summarize different solutions of water logistics at stump treatment in final felling.

AbstractThe purpose of this study is to analyse the reading- and writing-approaches: the LTG-method and the whole language-theory. The attention is to perform a comparative literate-study to distinguish their similarities and differences, and examine which one of the approaches that is most clearly anchored in the syllabus of the subject Swedish. The starting-point of the study is the questions: Which similarities respectively differences have the LTG-method and the whole language-theory? Which one of these theories is most clearly anchored in the syllabus of the subject Swedish? The study has shown that both the whole language-theory and the LTG-method can anchor in the syllabus for Swedish. However the whole language-theory has stronger hold in the syllabus, as the whole language emphasises the meaning of literature for reading- and writing-learning, and considers the pupils reflection during their learning-process and conquered knowledge-goal.

This paper is about basic set theory and cardinalities for infinite sets. One of the results are that the line R and the plane R2 contains exactly the same number of points. Because of that the set theory is described with a formal language this the paper has an appendix about formal languages..

The purpose of this study is to examine how women?s reading of the Harry Potter books can be understood on the basis of gender theory and reader-response criticism. The empirical data is gathered through qualitative interviews with six female Harry Potter readers between the age of 21 and 35, and is analyzed through several theories regarding gender and reading. The results show that the readers are critical towards many aspects of the books, especially when it comes to the stereotyped depiction of women and men. The books are said to reproduce the gender dichotomy, the gender hierarchy and the heteronormativity in society.