This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This paper examines how organizations work with their recruitment. The organizations in thispaper are mined in the trade of recruiting and staffing. The paper will further influence howorganizations work or will work with recruiting through social medias. It describes therecruiting process in the traditional way and what costs it brings. The next part is a descriptionof network and the importance of networking in a general way.Our results demonstrate that social medias probably will stay as a complement to other moretraditional methods and will not be an own recruiting method.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Every day consumers are bombarded with different marketing messages from all possible directions. At the same time consumers starts to actively and consciously avoid these messages. Therefore, marketers have to start thinking outside the box and find new ways to get consumers' attention. One of these methods is called guerilla marketing. The strength of guerilla marketing is its way to be unexpected and unusual.

Given that the end-customer has become more demanding, the retailer has to deliver products according to the market demands, which have forced manufacturing companies to constantly search for new opportunities to reduce costs and improve efficiency. It is, therefore important to choose suppliers that are able to compete with the market demands.The market demands in the textile industry have lead to shorter product life cycles, which have caused manufacturers to deliver flexibility with high technology to compete successfully on the global market. To achieve the market requirements the underlying factor is to be aware and optimally use and control time. New technology can have a major influence in the production development, if the company choose to take benefit of the advantages, by optimal allocation of the internal resources the productivity and efficiency will increase, to accomplish a competitive advantage. One way to achieve this is by investing in a Unit Production System.In our thesis we have questioned what the main driving forces for an apparel manufacturing company is when it chooses to invest in new technology.

Purpose/Aim: To investigate why people in the age group of 30-40 subscribe to the traditional morning newspaper even though they can get the same information at a much lower cost from for example TV, the internet or the free daily papers. The aim is to also look at possible future alternatives to the traditional morning newspaper.Material/Method: Focus group interviews were used to gather the empirical material. These consisted of a total number of twelve people, divided into three groups. The results from the focus group interviews were analysed with help from established uses & gratifications theories and two diffusion theories.Main results: This study shows that people read the traditional morning newspaper to get a good mixture of entertainment and local, national and global news. It is relaxing to read the newpaper on paper compared to reading it on the internet, mainly because you get a good overview which makes it a lot easier to find exactly want you want to read.

This thesis is the result of the author?s interest in music and electronics, namely the design and manufacturing of a stereo sound system with an active crossover. In short it can be stated that an active crossover has many advantages over its traditional passive counterpart. The active design naturally results in a more complex system comprised of a multiple number of components. This report deals with the theoretical aspects of preamplifiers, crossovers and power amplifiers as well as power supply and control.

E-books are not yet fully established on the Swedish book market. A frequently discussed theory is that this might be because of a loss in the reading experience. This thesis has the primary purpose to investigate whether the reading experience from E-books differs from the experience of reading a traditional book in paper. The book used for comparation is a poetry collection named Rakel delat med tio. I have designed the cover and the inlay of this book and as a part of the thesis the working progress is described.

 The purpose with this thesis was to develop a designguideline which will simplify the development of new products that will be laser welded. The need for this thesis has come forward from the quality problems that Volvo Construction Equipment, Components Division is having with their laser welding manufacturing unit. The reason for the problems emerges from the bad communication between the development unit and the manufacturing unit within the company when the products produced today was developed. This resulted in products that were hard to and in some cases almost impossible to weld. To avoid these problems from occurring again it was needed to gather the experiences within this area and compile it and present in a brief a pedagogical manner. The information for the groundwork of our results has been gathered by interviews of several key persons in Volvo Construction Equipment, Components Division.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

This Bachelor of Science thesis was carried out at Metso Panelboard AB, located in Sundsvall, Sweden. The work lasted for 10 weeks and began at the end of February 2007. Metso Panelboard is one of the leading suppliers of complete lines, single machines, engineering knowledge and after-market services to the fibreboard industries. The task involved building a 3D-model of a dryer cyclone in the CAD-program Pro/ENGINEER. A dryer cyclone is the part where the tree fibres are dried in the process of manufacturing fibreboards. Currently, it takes about two weeks to draw a dryer cyclone. By creating a 3D-model of it, which should have the functionality to be generated to different sizes, the goal is to decrease the drawing time to about 20 hours and to increase the quality of the work. This report includes the fundamental theories behind the manufacturing of fibreboards with focus on the dryer cyclone.

One task of school is to counteract traditional gender patterns. Literature is an actor which can affect people?s perceptions of what is feminine and what is masculine. It can therefore be worth looking at the works of fiction that are available for pupils in school. A book that is popular among children and adolescents is Twilight (2007).

The Russian operation on the Crimean peninsula has been referred to as a victory enabled by the operationalization of the concept of New Generation Warfare. According to some military theorists, this concept and its operationalization cannot be characterized in terms of the traditional wars waged up to this point. It is, however, also argued that this new generation of warfare is primarily a new approach to strategy, a new way of applying traditional methods to achieve political goals. The purpose of this study is to discern whether Russia employed strategic deception in its operation in Crimea and if this is the case; what methods and principles were used and if these can be explained using a traditional view of deception. The application of theories on deception by Michael Dewar and Barton S.

Highland Group AB was helping a customer of theirs to create an All-Terrain Vehicle (ATV), a project Highland has never been involved with before. For the wishbone arms of the wheel suspension, traditional manufacturing methods and tubes with cylindrical or square shaped cross section was preferred. We performed a simulation where the ATV was driving on a bumpy road too see the forces involved. With the results we proceeded to calculate the strength of the concepts to find out which is best suited for the tough environment in which the ATV is used. The concept that turned out to be the best was a wishbone made of circular cross section, which had good structural strength and did fulfill the demands that we required for the construction.

This thesis describes the design of a tipping trailer, from a company?s demands andrequests to complete manufacturing documentation. The design is developed for thecompany Abexor AB in Östersund that produces tipping trailers. The product issupposed to be used by Abexors customer to transport cargos of different kinds,such as gravel, stone, dirt, etc.The work commenced with a meeting at the company where demands were set.After that a pre-study was conducted to find out what traffic rules were required forthe trailer to be allowed to be driven on roads. Similar products were examined tosee how the trailer could be designed.