Earlier research has shown that young and adult citizens in Europe participate in politics in different ways. While adult citizens participate in more traditional ways, non-traditional ways are more frequent among younger citizens. Moreover, issue-based participation increases when Europeans turn away from mainstream politics. Citizens in the European Union EU-15 between 15-24 ages are likely to be ?critical? citizens of a working democracy compared to people in older ages (Sloam, 2016).

The aim of my thesis was to do a Life Cycle Assessment (LCA) of an average thread tap that is manufactured by Dormer Tools AB, and to create a practical model that the company can use in order to study other thread taps from an environmental perspective.The method of LCA is used to investigate the environmental effects of a product during its life cycle. This is a gate-to-grave analysis with focus on steel and thread tap manufacturing, coating procedure, use, waste management and transports. Three common coating types were compared separately. Steel manufacturing answers for the highest energy and raw material consumption under the life cycle of the thread tap. Its emissions contribute to global warming, acidification and eutrophication above others.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

An increasingly globalized market is leading to hard competition among manufacturing companies, which means that they are forced to become more customer focused to survive in the market. A Customer Relationship Management system is a system that will be of assistance to help companies succeed in building long term relationships with their customers. Best of Breed and ERP-based are two types of CRM systems. The study has focused on analyzing and examine the need for CRM systems at manufacturing companies. Our question formulation has been:? What need do businesses want to satisfy with a Best of Breed-based and ERP-based CRM system?? Are there any differences in the use of Best of Breed-based and ERP-based CRM system?In this study, we have chosen to carry out interviews and quantitative surveys with manufacturing companies to get their view of CRM-systems.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

This thesis in social anthropology is based on interviews with four hunters from the middle of Sweden. It is about how the hunters get their traditional knowledge and how important it is to grow up and live in rural areas for the knowledge and understanding of hunting. The essay is also about the difference between the hunters from rural areas and the hunters from urban areas. It also examines how the rural hunters speak about the true and real hunter..

The purpose of this study was to examine how pre-school teachers in Montessori inspired and traditional preschools can work with build and construction with the older children, and what views the pre-school teachers might have on the subject.  The study was implemented through qualitative semi-structured interviews with pre-school teachers. The investigational method was chosen due to the fact that I wanted to gain knowledge about the pre-school teachers? views and perspectives on build and construction activities, and how they might work with it. Another reason was to examine how the view on, and the work with build and construction can resemble and differ between Montessori inspired pre-schools and traditional pre-schools.The result shows that there is both similarities and diverseness between the Montessori influenced pre-schools and the traditional pre-schools, when it comes to how the pre-school teachers reason and work with build and construction.

Målet med examensarbetet var att skapa ett verktyg för insamling av erfarenhetsdata för produktutvecklingsprocessen. Den skall vara användbar för att bidra till ett systematiskt arbetssätt för produktionsanpassad konstruktion på Volvo Aero Corporation. Det skapade verktyget för insamlande av erfarenhetsdata skall bidra till att produktivitet och producerbarhet kan förbättras på kommande koncept och konstruktioner. En förstudie har genomförts på företaget under hösten 2010 vilket ligger till grund för det beskrivna problemet i examensarbetet.Arbetet avgränsades till att utveckla en struktur för hur metod och erfarenhet skall struktureras och en testversion av verktyget togs fram för utvärdering. Efter samråd med den handledande Verksamhetsutvecklingsgruppen, VU-gruppen, från avdelning 9931 Projekt-, Koncept- och Tillverkningsledning, beslutades att examensarbetet skulle avgränsas ytterligare till insamling av diametermått på komponenten Diffuser Case på Volvo Aero.

The de-regulation of commercial air traffic in the early 1990?s lead to that many new airline companies entered the market. Many of these new actors were low budget airlines which meant that the traditional airlines met a new type of competition. This situation contributed to the fact that ticket prices dropped in many countries. It has become more and more common that the traveller prefers to fly with low budget airlines rather than with the traditional airlines.

AbstractThe purpose of the present study was to clarify and describe what image men and women present and communicate in their profiles on an online dating site. Further has been investigated if traditional gender roles and stereotypes are as pronounced on this online platform or if it offers a space to go beyond traditional formations. The theoretical framework of this study consisted of a social psychological idea and understanding of identity as well as a gender theoretical perspective. The methodological points of departure were hermeneutic and the data consisted of ten male and ten female member profiles on match.com. The results of the study was divided into three themes, the emphasis on positive qualities, the attractive body and project manager to one?s own life.

Our report procedure identification of instability and disturbance in an automatic manufacturing line of processing and assembling of chair sliding rails at Sapas manufacturing department in Vetlanda.To obtain a stabile ground we have mapped the material flow to receive a comprehensive view and to visualise connections.We have examined cycle times at different stations in purpose to identificate bottlenecks. The result of our examination showed that the bottleneck of the line was the brush station. This leads to that the expected bottlenecks identificated by Sapa gets a delay time and by that a longer cycle time.Interruptions has a clear negative influence at the line performance so we have also assemble data through the operators report list and compiled these in order to find out the interruptions effect on the line. The outcome during our assembled period was that the reported interruptions corresponded about 30 percent of the total available production time. This has a clear negative effect on the line productivity and efficiency as we have calculated in order to get the present status..

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2013:08.

The purpose of this essay has been to examine the public`s view of the Swedish eldercare during 2006. This study uses discourse analysis as a research method, the reference material has been articles from the newspaper Dagens Nyheter. The aim of the research has been to find central themes, conflicts and consensus in the discourse of eldercare. The analysis resulted in four main subjects which were based on four main questions; the questions of responsibility and execution, the question of contents, and the question of where the eldercare should take place. The analysis of conflicts and relations of consensus in the discourse of eldercare resulted in two different main views; the traditional and a more modern.

The purpose of this research is to evaluate traditional market segmentation variables, as criticism has been directed towards these variables. Based on our problem discussion we find it motivating to undertake investigation in order to understand which connotations an ethnographic approach will provide. Methodology:We have applied an ethnographic approach, which has enabled us to attain under the surface knowledge from our respondents. Theoretical perspective:As we wanted to evaluate existing traditional segmentation variables, we decided to only include theory regarding these variables. Empirical data:In order to collect our data, we observed seven respondents at Ikea and conducted observations and in-depth interviews in their homes.

The purpose of this master-thesis in library and information studies is to investigate how different views on children´s literature show up in pedagogical work in preschool. The aim is also to study methods used in the pedagogical work with literature. Are there any connections between views and methods? Is any view predominant or are they used in combination? The question at issue is: "Are there any connections between different views on childrens literature and pedagogical methods in preschool, and if so, how do they show?" The framework of theory is based on epistemological concepts viewing children´s literature by John Hultberg. In "Om humaniora, litteratur och tradition" he sorts out three strategies: the pragmatic, the traditional, and the emancipating.