Along with the development of technology, the cross-border trade is increasing and therefore there is a need for greater consumer protection. A good consumer protection creates a feeling of safety for the consumer and that by itself may help to increase cross-border trade. This is one of the reasons for why the EU has established regulatory framework for electronic commerce, for example the Directive2000/31/EC. The direc-tive strives to create a similar law for electronic commerce within the European Union. This paper?s main purpose is to ensure that the directive is implemented properly in Swedish law, and if there are other possible ways to achieve the objective, other than the ones that the Swedish legislator has chosen.

Lufttätheten hos en byggnad påverkar dess energiprestanda, luftkvalitet inomhus, ljudisolering och riskerna för fuktskador. Lufttäthet definieras i Sverige oftast utifrån klimatskalet, i enlighet med tidigare byggnadsregler och den svenska definitionen för passivhus. Däremot finns det idag inga specificerade myndighetskrav på lufttäthet i Sverige. I examensarbetet undersöks lägenheterna i ett flerbostadshus i Malmö. Förutom lufttäthetsprovningar enligt SS-EN 13829 gjordes en mottrycksmätning för att bestämma läckaget mellan två lägenheter.

 We have chosen to write our thesis within a transport company. The work was carried out at DHL activities in Uppsala. DHL is one of the leading transport companies worldwide. Our interest lies in more efficient and advanced transportation and terminals, as globalization and new trends require effective solutions.The aim of our work is to explain the need for information technology applications in road haulage and associated terminal operations. Furthermore, we analyses terminal and applied information technology.

In most software engineering project, users are only involved in the beginning of the project as a help to design the requirements specification but users can be involved after this phase too, but is it effective to do so? With this report we would like to investigate how effective it is to involve users after the requirements specification has been written and approved. To find out how effective it is to involve the users we try some fast and simple involvement techniques on a quite far gone project. These techniques include ethnographic studies, prototypes and surveys. We also interviewed a couple of people who work with usability and finally delivered a report with our results to them to find out if they found our result relevant.

By using modern methods of casting concrete, cast in place can get more effective and industrialized. A modern method is self compacting concrete. By using this type of concrete, advantages like improved working environment and rationalized construction can be reached. Because the concrete doesn?t need to be vibrated, the amount of staff on site and the noise can be reduced.

Information technology development has in recent decades had a major impact on retailing.Discount supermarket chains began to offer customers the possibility to shop without therequirement to do this over the counter, instead the customer could help themselves buyingthe products they wanted. Retailing today has an even greater focus on the self service in thesupermarkets, recently many retailing chains has introduced self-checkout systems toincrease the profits and reduce staffing requirements. In the 1960?s the start for today's ecommercewas founded, however the development took off 30 years later in the beginning of1990. During the first years of 2000 the consumption on the Internet increased rapidly.

Social movements have long been valuable components of the struggle for a world with true justice. Along with the changing and modernization of society these movements also change, both in their actions as well as in the goals they want to accomplish. Technology is taking a greater part in many aspects of social life, creating new dimensions but also new social divides. This thesis examines how new social movements make themselves visible and affect the world around them through different kinds of networks. For the purpose of this study, we have chosen to study two social movements; the Zapatistas in Mexico, who have become known worldwide for carrying out the first informational revolution, and MoveOn.org, an American grassroots organization that struggles for increased democracy in the US.

The notion of firms interacting with technology is not new; these types of systems were already in place in the mid eighties. E-business users worked with connections between their inbound logistics and procurement systems, and suppliers? order-entry systems. When these connections were described for the first time the vertical links between two, or more, value chains in a value system received more attention in firm strategy. The design of the linkages in the value system was said to be a product of the need for coordination and relative bargaining power.

This report is the result of a thesis work in Integrated Product Development, regarding hygienic features in dishwashers and especially disinfection by the use of steam.The thesis is performed at Electrolux Primary Development Dishcare in Stockholm and in collaboration with the Department of Machine Design at the Royal Institute of Technology.The targets of the thesis are to prove the advantages of a technology suitable to implement as a hygienic feature inside a dishwasher and to realize a functional prototype of a differentiated hygienic feature that does not exist on the market today.The process followed to perform the thesis is the process defined for Electrolux Primary Development.The technology chosen for development is disinfection by heating the water on the surface of the dishware, by the use of steam.A number of tests on how steam behaves when injected into the dishwasher tub have been performed, providing the results that have been taken in consideration when designing the prototype.The prototype consists of a pipe system provided with nozzles to eject the steam into the upper parts of the dishwasher. Tests of the final prototype show that thermal disinfection of water in a dedicated area of the tub can be reached within 9 minutes. The operation requires 0,17 liters of water and consumes 0.2kWh..

Arbetet har utförts på ABB i Ludvika med avsikt att förbättra revisionsprocessenför kontroll och skydd. En revision är en ändring på ett godkänt och klarmarkeratobjekt. Då objektet i fråga redan kan vara levererat till kund och man behöver göraen ändring krävs en strukturerad process för att utföra denna ändring. Processen föratt göra detta är i dagsläget komplicerad och kräver en hel del administrativt arbete.Processen använder sig utav ett antal program för lagring och databaser så som,Lotus Notes, HiDraw Studio, och HiDra32.Avdelningen för kontroll och skydd är i fasen att övergå till ett annat elCADsystem, Engineering Base. Detta är också en av anledningarna att man önskar en nyprocess för revisionshantering.Arbetet bestod till en början av inlärning av den dåvarande processen.

To make it easier for forestry planning the forest owners needs data which describe characteristics of the forest. Such data you usually get from some type of inventory. A relatively new technology which probably is getting more important in the future, is laser scanning because of lower costs. But because the laser technology is relatively new you need to compare it with conventional inventory technologies to get better understanding of the possibilities the laser technology gives. This work intends to estimate field measured characteristics of the forest from laser data with help of regression analysis and then see which of the field measured properties that best could be estimated and which laser variables that gave the best results. This study shows that heights has the best estimates, but biomass, diameter and volume also gives good estimates.

Problem areaAlfa Laval is a world leading company in the heat transfers area and have the vision to continue to be that in the future as well. The company has a lot of press lines where the utilization is high and also has started to become old. Prognosis shows that there is an increased demand of heat exchanger in the future. This increased demand is not something that existing lines will manage. To build new lines cost a lot of money and take time so it is essential that new lines are correct from the start and not need to be rebuilt or a lot of time spent to trim it.GoalThe goal is to achieve 100% theoretical utilization of the press (the press shall press the amount of plates it is designed for).

The CASA-paradigm, Computers Are Social Actors, was introduced in the book "TheMedia Equation" by Reeves and Nass. One of their experiments concluded that we tend to be polite to computers in the same way as we are to people. In this study I have replicated Reeves and Nass experiment but instead of a text-based interface I have used a virtual agentin order to find out if we are polite to the agents, or still to the computer. Two experimental setups was conducted. The two setups had a common first part that was carried out on onecomputer with one agent.

Along with the development of technology, the cross-border trade is increasing and therefore there is a need for greater consumer protection. A good consumer protection creates a feeling of safety for the consumer and that by itself may help to increase cross-border trade. This is one of the reasons for why the EU has established regulatory framework for electronic commerce, for example the Directive2000/31/EC. The direc-tive strives to create a similar law for electronic commerce within the European Union. This paper?s main purpose is to ensure that the directive is implemented properly in Swedish law, and if there are other possible ways to achieve the objective, other than the ones that the Swedish legislator has chosen.

Today we can create digital 3D models which can be realised almost instantly through production methods such as 3D printing and computer controlled milling.What if this same technology could be applied to the development and construction of terrain parks?With snow as the material tools could be developed using similar principles to design and sculpt the surface, only on a larger scale.How would terrain park designers adapt their process to use this new technology? In this Industrial design thesis I explore how the ideas of the terrain park designer can be expressed through such a system with focus on the designers knowledge and skill without the need to learn complicated 3D programs.Sketch, create, ride. .