The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

Information technology and globalization has led to an increasing competition and service production has been more and more independent of locations. This has made a market of outsourced telephone costumer service possible. Due to high establishment the market has been saturated and with that price has sunk. Customer companies have the last few years got more negative to outsourcing of their telephone customer service as they through operating the customer service internally want to get closer to their customers.In the empirical study the writers try to figure out which companies the callcenters should try to aim towards to get long and profitable cooperation. This will be done through deducing guiding principles from theories about how different factors around companies costumer service should look like.

In the project, my ambition was to make a stage design for theater withteenagers as target group. I have worked with the musical theater groupTheater ACTA in Gothenburg and independently from scripts, interpretedand shaped an outline for the basis of the set design of the play?s differentelements. The play, If this was a feel-good movie, is written by Elin Frostand Anna Lundholm, two members of Theater ACTA. The story is aboutthree people in their twenties with different relationships to each other andone week that would change their lives.

The purpose of this thesis is to examine how key performance indicators are being used as performance management tools within the production industry. Specifically the purpose is to investigate how the KPI:s within the telecommunications industry drives reusability regarding production test systems. This thesis will also highlight today?s cost models and suggest improvements of the KPI and what new ones could be introduced. A case study at Ericsson AB has been performed.

The Swedish government has set up the overall goal that no net emissions of greenhouse gases can occur after 2050. A sub-target has been developed for road transports which states that the use of fossil fuels must be reduced with 80% to 2030 in order to be completely abolished to 2050. A public inquiry mapping how this can be achieved was handed in to the government late in 2013. The use of alternative fuels for road transport, both biofuels and electricity, is expected to give the biggest contribution to the reduction of the use of fossil fuels. The inquiry sets up a number of goals for how much the use of alternative fuels must increase to 2030 in order to reach the overall goal and which instruments that are needed in order to do so.The aim of this thesis is to evaluate how these goals can be reached and what the most likely obstacles that may hinder the reaching of these goals may be.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

The digitalization of the media industry has involved great changes for the Swedish daily press. Instead of subscribing on a daily newspaper, more people tend to read newspaper's free edition online.  The recent recession has contributed to strike hard against the newspaper's economy. This is the problem our research is based upon. How will the newspaper develop and which measures have to be done to get a well functioning business model that is suited for future conditions?We have made qualitative interviews with Swedish newspapers: Göteborgs-Posten, Norrköpingstidningen, Sydsvenskan and with the danish newspaper Politiken.

Objective: To see if nursing students believe that they have acquired the knowledge that the Higher Education Ordinance demand and if there is any difference between the theory learned at the University and the clinical reality in which students receive their practical training. Method: The method is quantitative and is divided into two parts, one in which the authors describe how the questionnaire was developed and how validity was strengthened. In the second part, the authors describe how the data analysis was made and how reliability of the result was strengthened. Result: The result shows that the students felt that they have achieved most of the objectives of learning demanded by the Higher Education Ordinance. But some objectives are perceived as not at all or only partly achieved.

The sun is essential to life on earth and no matter where you are, there is a constant need ofenergy. Nearly 800 000 years ago man learned for the first time to use fire in a controlled way.Since then, fire has given us the opportunity to inhabit places despite a cold climate. In Swedenthe resident sector accounts for a major part of the total consumption of energy. In a time whenenvironmental issues and greenhouse effects are increasing, we also see a future of rising energyprices. With this perspective, we have in this bachelor thesis in the Building Environment at theRoyal Institute of Technology, KTH, in Stockholm decided to focus on the renewable energysource, solar energy.The energy from solar radiation is a free resource and does not have any negative effects uponthe environment.

This report describes the bachelor degree project called ?A case study in strategic product design in collaboration with Elfa? carried out by Mathieu Gustafsson and Pär Rickberg,students at Carl Malmsten Furniture Studies.We had the opportunity to do our degree project in collaboration with ELFA after a previous school project where we made suggestions for new products. Initially the brief was to develop new products for the company which was based on previous proposals.Reasoning led us in to design strategies and how to use such a strategy to develop newproducts for ELFA. During our first superficial analysis of ELFA and its current products, we found that we wanted to recast the framework of identity and context in which the product would be created. According to the researches made by SVID (The Swedish Industrial Design Foundation),companies that continually are working with design strategies strengthens the brand, its competitiveness and become more innovative.

This master?s degree project concerns the combination of a multi dwelling passive house with solar energy for the generation of electricity and domestic hot water (DHW). Different alternatives with either solar thermal systems or photovoltaic (PV) systems are compared with two reference alternatives producing DHW from electricity or district heating. The economical comparison uses a life cycle cost (LCC) perspective based on the present value of expenditures for investment, energy and annual operating and maintenance.The energy yields from the solar energy systems were calculated by hand and with simulation software. Calculation and dimensioning of PV systems were carried out with a software called PVSYST.

The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.

To manage the industry?s need of wood assortments in a optimal and cost effective way the forest companies need to have knowledge of the actual standing volume and the yield of the planned clear cuts. The mean volume of the trunk is also important since it is important for the contractors prices. Today the total volume are estimated either with Näslund (1940) or Brandels (1990) functions of volumes, and the yield is estimated with Rune Ollas (1980) function for trunks and stands. The purpose of this study has been to answer the following questions: How good is the yield forecast with data collected with currently used methods? How well can the yield forecasts became with data collected according to the instructions? How well can the yield forecast be with data collected according to the instruction and calculated with the program Aptan for theoretical bucking? The study has been initiated and financed by SCA Skog AB.The material consisted of a number of randomly selected objects ready for clear cut.

A trading halt is a measure conducted by a securities exchange in order to reduce information imbalances between market participants, thus enabling a higher level of market efficiency. A market is said to be efficient when new information concerning a company is instantly reflected in its stock price, implying that abnormal stock returns cannot be systematically achieved in an efficient market. The purpose of this study is to examine the occurrence of abnormal stock returns following trading halts on the Stockholm Stock Exchange. The study is based on a sample of 64 trading halts executed between January 2003 and February 2008. Historical daily prices for stocks subject to trading halts during the period have been gathered from the Datastream Advance database, while information on date and time of trading halts have been collected from the Stockholm Stock Exchange website.