Sökresultat:
1988 Uppsatser om Target Customers - Sida 64 av 133
Övergripande kvalitets och kapabilitets granskning av produktionsprocessen ? en implementering av SPS. : Overall Quality and Capability Study of the Production Process ? an Implement of SPC.
Quality was earlier only an issue for the company?s quality departments but today is the entire organization involved in quality- and improvements work. With the customers in focus, both external and internal, quality and improvement work should be integrated in the daily activities. The management shall state goals and visions together with a policy. Through participation the correct requirements for a successful work are created.With SPC, statistics process control, there is an opportunity to perceive variations in the process and with the correct tools make it stable.
Att skriva ett kurskompendium för tätkontroll och läcksökning.
SAMMANFATTNINGLackage fran en komponent i form av vatska eller gas ar ett ofta underskattat problem som kan geupphov till samre produktkvalitet, energiforluster och i slutandan ge ekonomiska konsekvenser omlackaget blir for stort. Det finns dessutom en miljo- och halsorisk om en produkt eller komponentlacker ut storre mangder kemikalier eller metaller. Kan lackaget minskas finns med andra ord storavinster att hamta.Nolek AB bygger instrument for att hitta lackage, lacksokning, och mata lackage, tatkontroll.Foretaget arrangerar utbildningar for sina kunder men har tidigare inte haft nagot uppdateratmaterial for detta andamal. Syftet med examensarbetet ar att producera delar till ett nyttutbildningspaket inom tatkontroll, lacksokning och provtryckning samt att undersoka teorier forskrivande av pedagogiska texter. Arbetets resultat utgors av ett kurskompendium samt enPowerPoint-presentation kopplad till kompendiet.
Konsumenters Kontantanvändande : Varför använder konsumenter kontanter som betalningsmedel?
On November 1st 2010 the obligatory audit was removed in Sweden for small companies. What factors influence such companies to have their financial reports audited, and what factors exert the strongest influence. Purpose: The authors would like to investigate factors that affect companies with voluntary audits in Skåne län to continue with the audit. The authors also wish to examine the factors that have the strongest impact on the choice to adopt auditing. Method: A quantitative study has been conducted in which aquestionnaire was sent to companies in Skåne Län Conclusion: The factors that affect smaller companies to continue with audit are as follows: Accounting quality, cost, creditors (loans), suppliers / customers, the tax office and distort competition.
På vilka sätt kan bibliotek vara användarvänliga för människor med dyslexi?
The purpose of this study is to find out how libraries can be user-friendly to people with dyslexia by focusing on how adult dyslectics experience the library. Data were collected through literature and interviews with adult dyslectic students. Two different types of user studies served as a theoretical framework; one was an individual-related study by professor Wilson and the other was a system-related one from professor Buckland. The findings in this study shows that dyslectic library users often experience difficulties when seeking for materials in the library, due to the libraries organisation of material according to the written language. Through technical aid and a more user-friendly organisation of materials it may be easier to find relevant material for dyslectics.
Marknadsundersökning av John Deere slåtterkross 730/735 :
This examination work is about an marketing investigation of John Deere Moco
730/735 during the season year 2003.
Moco 730 has an workingwidth on 3 m, and 735 has one with 3,5 m.
The research results of 16 moco 730/735 are from intervju- and questionnaire made of
the owners. The results also comes from intervju anwser from dealers which sold this
mocos.
The examination work shows comments and opinions from the customer after one
seasons use.
In the end of my examination work are all comments and opinions put together in a
marketing analysis called swot-analys in Swedish. The analysis declare that the moco
730/735 is functional and have god quality. The future seems god for this kind of
moco.
The strength for this moco are god quality and the dealers god service support. The
most important weakness about this moco are that the machine came out late on the
market, compared to other mocos on the market.
I think it´s important the have in mind that the customers are very John Deere faithful
and this JD 730/735 is used for only one season..
Vitpunktsförskjutningens påverkan på ICC-profiler vid användande av optiska vitmedel
The connection between fluorescence and color management still is a relatively unexplored area. Thefollowing composition analyses the theory that when printing on fluorescent ink jet paper using ICCprofilesa more yellow print will appear. In theory the ICC-profile compensate for blue light that fluorescefrom the paper with the complementary color, yellow. The human eye apprehands this fluorescentlight as white.When categorizing a number of ink jet qualities some tests to indicate change of color in the final printwere made. Five qualities were chosen for further analyses, each with different white point.
Simulated Annealing : implementering mot integrerade analoga kretsar
Today electronics becomes more and more complex and to keep low costs and power consumption, both digital and analog parts are implemented on the same chip. The degree of automization for the digital parts have increased fast and is high, but for the analog parts this has not come through. This have created a big gap between the degrees of automization for the two parts and makes the analog parts the bottleneck in electronics develop. Research is ongoing at Electronics systems group at Linköping University target the increase of design automization for analog circuits. An optimizationbased approach for device sizing is developed and for this a good optimization method is needed which can find good solutions and meet the specification parameters.
Skolan, en viktig del i ensamkommande flyktingbarns socialisation
AbstractThe purpose of our study is to reach an understanding of the situation of unaccompanied refugee minors in school. Thus the study aims to investigate what sort of possibilities and limits they encounter when going through their school education. We have chosen a qualitative method and conducted interviews with four persons between the ages of 18 and 21 years.The result of the study shows that unaccompanied refugee minors experience numerous limitations and lesser possibilities than other students, which prevents their educational and social development. The limitations partly depend on the school personnels lack of knowledge about this target group, and partly on the difficulty of dealing with a new culture which is different from the students original culture. An important conclusion that our study has shown is that the educational system has a great impact on how well the students manage to function in the new society later on. Therefore it is of great importance that the teachers have access to competence development , since this is of substantial importance for the unaccompanied refugee minors development and socialization. .
Konstruktion av fackla för biogas
Värmekollektor in Sunne is a company whose main occupation is to collect the gas produced inlandfills. The gas contains about 50 % of Methane which is a greenhouse gas 20 times worse than CO2and should therefore not be allowed to leak into the atmosphere. The Methane is in as large amount aspossible used in different plants for example heating of households. But there are occasions when aflare is needed to burn the excess gas at standstills or testing of new landfills. The Flare only burns themethane to reduce the hazarder?s effect of the environment, it does not take advantage of the energy inthe gasThe goal of this master thesis was for me to create a foundation for an in-house production offlares for Värmekollektor.
Hastighetsmätning av kolvrörelser i pneumatiska cylindrar
The purpose of this thesis was to investigate different methods do measure velocity of pistons in pneumatic cylinders at Bosch Rexroth Teknik AB. Through information of velocity the adjustment of a cylinders damping can be done easier.A future transducer will be used by salesmen, service personnel and customers. This requires a sensor that is easy to apply and use. It is also desirable that the sensor is cheap. A number of possible methods to measure velocity have been presented.
Konvertering av webbapplikationer från ASP till ASP.NET
This dissertation is carried out on behalf of Two i Sverige AB. Two is a consulting agency which primarily works with the development of homepages. The company has several of its complete applications written in ASP e.g. the development of homepages. At the agency they have seen benefit migrating these applications from ASP to the more flexible environment ASP.NET.
Att sälja ett beteende : En undersökning av en social marknadsföringskampanj
AbstractCommunication and information has become a large industry in today?s society. More and more organisations use these means as tools of influence. Non-profit organization?s campaigns, which aim to change a behavior, often have a political responsibility and it is therefore important that these are carefully planned and carried through.
Demografiskt perspektiv på Employer Branding : En kvantitativ studie om hur Ålö kan attrahera ingenjörsstudenter med Employer Branding
Engineers are a group of individuals who are attractive when companies are in need for competence in technology. Today it is a shortage of these competences in the labor market. Because of this there has grown a competition among companies when they strive to recruit the best engineers. Therefore companies spend more resources on marketing themselves as an attractive employer. This study was set out to find what engineers think is an attractive employer through a demographic perspective.
Akka. Ett skrivbord för hemmet anpassat för rullstolsburna.
A woman is dying of cancer, she refuses to use her walking aid. Because she is embarrassed. This means she can?t leave her house, and her last days become very limited.Why do we act like this?Can the view we have of products adapted for disabled be changed by working with colour, texture, form and materials?There are many products adapted for disabled, the products often have a good function and well developed ergonomic aspects but the visual aspect leaves a lot to wish for. There is neither effort nor money put in to the exterior design of most of these products.A lot of the solutions that are invented for adapted products can be used in design of ?regular? products.Why should we then divide products in to adapted and non-adapted.
Tillämpning och utvärdering av kriterier för eTjänstetydlighet och handlingsbarhet : Actability, eTjänstetydlighet, MA/SIMM
A sequence of actions in the world have influenced the information science, one of these actions is the lateral movement in how companies use their IT-systems. IT-systems today, in comparison to before, are used by companies to improve their relationship with their customers. Every year a big amount of money is spent on developing and improving IT-systems. That is why it is important to develop and create IT-systems that are clear, and which encourage, enable and simplify a user?s action.