The aim of the study was to compare how the population of pine (Pinus sylvestris) and spruce (Picea abies) have changed between 1927 and 2013 in the oak landscape south of Linköping. A field study was carried out in 22 two kilometre lines which also had been studied in 1927. In these lines, which where ten meters broad and had a direction from west to east, the pines and spruces were counted, measured and classified by Steam diameter. The obtained result was that the basal Steam area (m²/ha) had increased for pine (44%) and spruce (57%) between 1927 and 2013. The amount of trees had increased in all diameter classes except thinner pine and spruce with a diameter of 5-10cm.

Denna rapport behandlar utvecklingen av den spelmotor samt spellogik som används i speletSteam Tale utvecklat under projektnamnet Project Steam Age av gruppen StormBound. Speletutvecklades i första hand för mobila enheter, och i rapporten ingår även en kort undersökningav mobila spel i ett historiskt perspektiv. Även spelets genre, JRPG, en förkortning avJapanese Role Playing Game, kommer att förklaras som hastigast med referenser till andraspel inom genren.Spelet programmerades för Android OS version 2.3 och framåt i språket Java. En avsvårigheterna som påträffades, såsom beskrivs i rapporten, var att säkerställa att speletfungerar för den varierande prestanda som mobila enheter utgör, inklusive aspekter såsommed eller utan hårdvaruacceleration av grafik, varierande mängd lagringsutrymme ochprocessorkärnor samt storlek på skärmar. Därtill bör man vid skapandet av en applikation avdenna typ beakta resurshantering, framförallt beträffande grafik och ljud, ett ämne sombehandlas i denna rapport..

The purpose of this thesis was to make an energy survey and quantify energy flows of individual unit operations associated with the biogas production in Uppsala Vatten och Avfall AB:s biogas plant, located at Kungsängens gård. Moreover, large consumers of energy would be identified and analyzed. The objective of this energy survey was to obtain a detailed understanding of the energy use in the biogas production.The energy survey was divided into two parts: electricity and heat. Each part was treated separately and with somewhat different approach. To estimate the electricity usage during the projcet the rated power of each selected unit operation was noted and multplied with thenmeasured time of usage.

The purpose of this thesis was to make an energy survey and quantify energy flows of individual unit operations associated with the biogas production in Uppsala Vatten och Avfall AB:s biogas plant, located at Kungsängens gård. Moreover, large consumers of energy would be identified and analyzed. The objective of this energy survey was to obtain a detailed understanding of the energy use in the biogas production. The energy survey was divided into two parts: electricity and heat. Each part was treated separately and with somewhat different approach. To estimate the electricity usage during the projcet the rated power of each selected unit operation was noted and multplied with the measured time of usage.

Arvika Fjärrvärme AB, a district heating company from Arvika, today cover 74 % of their total energy production with biofuel wich runs a 16 MW bioler giving process water at saturated liquid state.In recent years Vaporel AB has introduced a new tecnique that gives an external generation of Steam after boilers. The concept is built on an adiabatic pressure drop of the saturated liquid in a so called Flashbox which makes a small part of the liquid to evaporate. The generated Steam is lead into a turbine where electricity is in a conventional manner.The purpose with this rapport was to do a basic study for the specific system at Arvika where it?s possible to see the potential production of electricity that follows an installation of a flasbox.The final goal was to introduce an economic analysis of a flashox installation at given conditions.To reach our goals we have created a model in Excel where we used the given conditions at Arvika Fjärrvärme to do our calculations. The model has been tested at three different states, of process water returning to potboiler, to be able to decide the optimal operation for the system at present.The studies have resulted in a pressure of the processwater at 14,5 bar (at) and a pressuredrop to 9,5 bar (at) in the flashbox.

EU har som mål att år 2020 ha minskat utsläppen av växthusgaser med 20 % och ökat andelen förnyelsebar energi till 20 %. I Sverige är andelen fossilt bränsle som förbränns ca 30 %. Denna studie syftar till att utreda om termokemiskt behandlade biobränslen kan ersätta de kommersiella fossila bränslena. Resultatet har nåtts med simulering i programvaran Fuelsim och insamling av experimentella data.  En simulering ska påvisa om syreberikning gynnar bränslena och experimentella data används för att se vilka problem som finns för respektive bränsle.

 This degree project aims at developing a concept for how to use solar energy to pump up water. The target audience is people living in areas where the functioning of the electricity and water network is absent. In these areas, the hand-powered water pump is the most common technology. The degree project's goal is to find an economically viable alternative to the time consuming hand-powered water pumps. The power comes from solar energy.

Several technical solutions are ready to step forward as the new generation of propellant, and this report aims to explore the possibility of commercializing fuel cell cars. The report is based on current research and data from today's technology and engineering solutions that are estimated to be commercially realized before 2020.A mapping of today?s different fuel cell options has shown that the most suitable fuel cell option is the Proton Exchange Membrane Fuel Cell, which uses hydrogen as fuel. The report is focusing on a techno-economic well-to-wheel analysis of hydrogen and the energy balance and costs in a system perspective. The basis for this analysis consists of two centralized methods of production, Steam methane reforming (SMR), and alkaline water electrolysis.

Bioethanol is one alternative energy fuel that can be produced from different types of biomass. Second generation bioethanol comes from fermentation of lignocellulosic material and can be seen as a more environmental friendly alternative as e.g. forest residues and agricultural by-products are used. To be able to use lignocellulosic biomass in ethanol production, it has to be subjected to different treatments first. In this study, aspen sawdust was used as lignocellulosic material.

SVENSKA: Vårt kandidatarbete gick ut på att ta reda på om det var möjligt att utveckla ett kort spel i hög teknisk kvalitet och ändå skapa ett djupt intryck på spelaren. Under projektets gång utvecklade vi, med hjälp av UDK (Unreal Development Kit), ett skräckspel i 3D till PC vid namn The Horror at MS Aurora. För att erhålla den höga tekniska kvaliteten som vi var ute efter användes metoder som räknas som standard för stora speltitlar på marknaden: Animationer spelades in med Motion Capture och musiken skrevs med en full symfoniorkester i åtanke. Innan produktionsfasen tog vid gick alla gruppmedlemmarna igenom en research-fas, där var och en satte sig in i de områden som skulle komma att vara aktuella under produktionen (d.v.s. hur UDK fungerar, musikteori och orkestrationsteknik, hur man arbetar med Motion Capture-data o.s.v.).

SVENSKA: Vårt kandidatarbete gick ut på att ta reda på om det var möjligt att utveckla ett kort spel i hög teknisk kvalitet och ändå skapa ett djupt intryck på spelaren. Under projektets gång utvecklade vi, med hjälp av UDK (Unreal Development Kit), ett skräckspel i 3D till PC vid namn The Horror at MS Aurora. För att erhålla den höga tekniska kvaliteten som vi var ute efter användes metoder som räknas som standard för stora speltitlar på marknaden: Animationer spelades in med Motion Capture och musiken skrevs med en full symfoniorkester i åtanke. Innan produktionsfasen tog vid gick alla gruppmedlemmarna igenom en research-fas, där var och en satte sig in i de områden som skulle komma att vara aktuella under produktionen (d.v.s. hur UDK fungerar, musikteori och orkestrationsteknik, hur man arbetar med Motion Capture-data o.s.v.).

This thesis concerns an energy audit of a food industry. The company's business consists of boiling and peeling shrimps, and producing mayonnaise-based salads. This type of work involves energy-intensive processes, such as Steam generation, compression of air and refrigeration of large spaces. These needs are supplied with electricity. Furthermore, the industry is a major consumer of district heating, particularly for heating the supply air in the ventilation system.

Evaporation is a part of the chemical recovery department at wood pulping mills. The purpose of evaporation is to remove water from the black liquor, which makes the liquor combustible. The process is very energy demanding, and having a well-functioning model of the system is of greatest interest. The model can then be used to study energy consumption and to test different control strategies. Two models have been developed during the master thesis.

My questions at issue for this report has it´s beginning in the growing problems of thenegative effects of burning fossile fuels and the rapidly growing energyprices.1. Is it possible to design a micro scale powerplant?2. Is it economically interesting for a potential customer to by such a product?The aim with this report is therefor, with the help of design work and calculations, to answerthese questions and to create a platform for building a fully functional micro scale powerplant.The material used in the report is mostly product catalogs from various industries but alsostudy course littrature about Steam engines.The result of the report is that it is fully possible to design a fully functional micro scalepower plant.

Combustion of fossil fuels is today the dominating source of energy. During combustion,carbon dioxide is formed. The carbon dioxide accumulates in the atmosphere,which raises the global average temperature on earth through the so called greenhouseeffect. The only way to reduce the emissions of carbon dioxide from combustionin a coal fired power plant is through carbon capture and storage (CCS).Post-combustion capture is a technology to separate carbon dioxide from the uegas after the combustion for efficient transport and storage. The steady state operationof coal fired power plants with post combustion capture has already beenthoroughly investigated on a pilot scale, however much work remains to investigatethe plants dynamic operation.