This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

The aim of this study was to explore and gain understanding of the situation between managers in different forms of human service organizations. I chose to use a qualitative method and conducted semi-structured interviews with five professional middle managers in the public sector. To accomplish my purpose, I worked on the basis of several questions. The questions dealt with the role of middle management and what it involves, how it is perceived and what the middle managers think of the specific requirements for them and their leadership in organizations that provide services relating to people.  As a result of the analysis I have used the theory of social roles that describes the meaning of the different roles and role conflicts that arise in connection with various and conflicting expectations. The review of the results shows that middle managers in human service organizations experience to have to deal with a complex leadership role.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

Title: A study about the purchasing process of ITLevel: Master thesis in Information Technology and Business Administration, 15 hp, EIK024Authors: Emelie Johanson and Mikael LindströmTutor: Peter Ekman, Mälardalens HögskolaKeywords: IT-investment, purchase, decisionProblem: In the last decades the amount of IT investments increased and has become an important resource within most organizations. IT gives the ability to compete and could also be a condition for many to be able to compete. In different businesses it could vary in where they put their focus when they choose an IT investment. This thesis examines how the purchase process of IT looks. How does processes differs in a bigger company versus a smaller company? From these two perspectives this study examined these research questions: Who makes the decisions whether or not an IT solution should be purchased? What aspects decide when companies are to choose between different IT solutions? Where in the purchase process do problems usually emerge?Purpose: The purpose of this thesis is to describe and analyze the purchasing process of IT from a business perspective.

When planning new wind farms, the cost for the internal electrical grid is estimated to account for 8-9 % of the total investment cost. On top of that, the cost for accumulated reduced income over several years (due to electrical losses), has to be added. The economic lifespan is relatively long (about 20 years) which means that an error in the loss calculation could lead to a bad decision basis. The accumulated reduced incomes due to electrical losses can be higher than the initial investment cost for the internal electrical grid.Today, Statkraft Sweden is using a template number when estimating the electrical losses in a wind farm. The actual losses are probably lower than the template number which could lead to an unnecessary high loss cost when planning a new wind farm.The aim of this M.Sc.

This project is implemented as a thesis at the Royal Institute of Technology in the master?s degree program Integrated Product Design and Industrial Design Engineering. The project has involved development and efficiency of a free starter package for expectant parents with useful content consisting of useful products for both before and after childbirth. Areas that have been investigated include packaging development, service design and appropriate content for the package.During the work, theory about packaging design, materials, manufacturing techniques and logistics have been processed to base the further work on. The project process has involved competitor analysis and interviews with store owners and customer surveys, that have been conducted to identify areas for improvement of the current solution.

In recent years, the Swedish railway track system has been neglected in terms of capacity and maintenance. To adapt the existing system to current traffic load there is a great need for extensive improvement and maintenance. Shortcomings are especially occurring on older embankments running over soft subgrades. To select the most suitable method for reinforcement of the embankment, it is important to evaluate different solutions from a life cycle cost perspective. In long-term perspective, it is often shown that a method with low investment cost causes a higher maintenance cost and a shorter technical lifetime.

Discharge of untreated wastewater leads to unnaturally high levels of nitrogen and phosphorus in rivers, lakes and the sea, which results in unbalanced ecosystems with eutrophication and lack of oxygen. Part of the phosphorus in surface waters is coming from on-site wastewater treatment from scattered households with unsatisfactory purification. Blast furnace slag is a by-product from iron production, and has in laboratory trials showed good phosphorus binding capacity. To test blast furnace slag as a reactive filter media for phosphorus separation in a full scale experiment, a wastewater treatment plant has been built behind the picnic area at Ångersjön alongside the road E4 in central-eastern Sweden. The plant contains two parallel lines, one with blast furnaces slag and the other with Filtralite-P as phosphorus sorbent. Both filters have showed decreasing phosphorus purification effect with time in spite of a low wastewater load.

This study presents a holistic view of which factors small and medium-sized enterprises (SMEs) have to consider, in moving their customer order decoupling point (CODP) further from the customer, thereby becoming more customized. The study also investigate whether SMEs and larger enterprises differ in the strategic questions relating to what influences an enterprise to become more customized, which prerequisites are required and which problems enterprises should anticipate and prepare for. These questions are important, given that strategic change is challenging, and can take considerable time to accomplish; it therefore needs to be based on the right decisions. This study is motivated by the fact that the markets SMEs are selling to tend to become more and more complex and harder to anticipate. Increased globalisation and use of IT and ICT have lead to greater uncertainty in customer demand.

För företag som arbetar med måttlistor och skisser och låter mönstret skapas på en fabrik kan det vara problematiskt att få plaggen att sitta som man vill. Speciellt svårt kan det vara med ärmhål, ärmkullar och halshål. Jag har arbetat med ett sådant företag för att ta fram en kappa och klänning från designskisser i sextiotalsstil med modern passform i storlekarna XS-XL. Moderniseringen innebär till exempel mer rörelsevidd, inte spetsig byst och längre ärmar. Till detta skapas plaggmåttlistor, materialspecifikationer och plaggdelsdokument för att plaggen ska vara färdigt för att produceras på fabrik.

In Europe, the central governments are the ones to coordinate the international standards and strategies regarding GPP; Green Public Procurement. However in Spain a GPP program was introduced late and only applied to the Central Government Institutions, (AGEA) (BOE nr. 027, 2008). These means that smaller administrations, such as, Autonomous Regions, Municipalities and Town Councils were not included in the program. The absence of a national program which excludes those governments made them introduce their own criteria for GPP, and the difference in criteria varies from one government to the other.

In Europe, the central governments are the ones to coordinate the international standards and strategies regarding GPP; Green Public Procurement. However in Spain a GPP program was introduced late and only applied to the Central Government Institutions, (AGEA) (BOE nr. 027, 2008). These means that smaller administrations, such as, Autonomous Regions, Municipalities and Town Councils were not included in the program. The absence of a national program which excludes those governments made them introduce their own criteria for GPP, and the difference in criteria varies from one government to the other.

Quickmatch is a company that recruits students to other companies that need temporary workers. Today all administration is done by hand, which is very time demanding and therefore inefficient. Employees send assignment reports by e-mail about the working hours and breaks to the administration office. Since these reports are handled manually, there is a great need for an automated system that makes the company more scalable.The purpose of this work was to solve the defined problem, i. e.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.