In this report the two authors, and project contributors alike, describe their work withdeveloping a solar cooker intended for usage in the developing countries of the world.Specifically, the work aims at developing a new, solar heat driven cooking device, possiblybased upon the current product. This should, in comparison to the current product, be lighter,easier to transport and to produce. Also, the new product?s production mustn?t be more costlythan today and the included materials and components must be obtainable from within theBolivian national borders where the product is currently produced. During the project, certainadvantages with a more efficient, and, above all, a more moderately priced product, werediscovered.

Competition in the market of interior design during the last several years has drastically increased. The consumers of today are very conscious about what the market can offer and therefore they have high demands on the products. It is not only the function of the product that matters but also the design that makes a difference. Companies are becoming more aware of this and as a result they have to find a way to set themselves apart in order to attract customers. This realization has led designers and economists to cooperate in a different way than before.

This report is the result of a master thesis carried out by the author, student at the Royal Instituteof Technology(KTH). The task was performed as a product development process at a companycalled Ameibo AB, located in Stockholm. It is the final task of the studies at the Master'sprogramme Design and Product Realization. The report is structured in a chronological order anddescribes the methods used, the implementation of these methods and a presentation of theresults given from these studies.Ameibo is a company located in Stockholm, distributing films on the internet. The aim of thismaster thesis was to investigate the possibilities of entering the market for portable devices.

ABB is one of the world?s leading engineering companies in power and automation technologiesand their solutions improve performance while lowering environmental impacts for energycompanies and industries. ABB FACTS designs equipment and plants for series and phasecompensation.This thesis has been performed at ABB FACTS on the Mechanical Design (DM) department inVästerås, Sweden. The purpose of the thesis was to develop and design calculations andsimulation tools for ABB FACTS?s standard series capacitor platforms.

This Master Thesis has been carried out in cooperation with Ursus Medical AB (URSUS) which markets, assembles and sells the Rotex Screw Needle Biopsy Instrument ®. The instrument is delivered with an instrument holder. Customers had expressed dissatisfaction over that they needed to use two hands during a biopsy procedure, which resulted in a project to develop a new instrument holder.The project aim was to create concepts for how the new instrument holder should be designed, with focus on the mechanics. The new instrument holder would build on the existing basic principle that the screw needle and the cannula were screwed into the tissue. The thesis work would result in a technical solution and a functional prototype of the chosen concept.To achieve this, a generic product development processes were used and began with a comprehensive literature review.

Wavecraft AB develops medical equipment for heating of organic synthesises. The heating is done with microwaves, which improves the process in both speed and accuracy compared to the more traditional methods where heating elements are used. This report discusses the developement of an automatic lid mechanism for one of Wavecraft's product prototypes. The company assumes that the final product will be integrated by customers into fully automated systems, and the upgrade from a manually to an automatically controlled lid is therefore an important step in the product's developement process.The first stage och the project was an idea generation process. The ideas generated here were organized into five different concepts of which the best one was selected through the use of a concept matrix.

Most people have been forced to throw away a pot-plant after its death. There are many reasons to the death of a plant, but mainly it?s because its owner forgets it, and therefore fails to water it. The purpose of this project is therefore to develop a product which can prevent this from happening, while the product has to have a low manufacturing cost to be able to compete whit other, similar, products on the market. During the project, a benchmarking has been done to give a clear picture of what the product has to compete with. The directives there are for CE-marking, and which of these who concerns the product has also been looked up.

As IT service departments in organisations are becoming more complex and customised, the indirect costs are increasing in relation to the total costs. The difficulty of fully estimating and identifying the spread of the cost in the IT service department is increasing. As a result, firms tend to budget the business unit as a total cost rather than as a spread of defined costs. In order to deal with this challenge an ABC calculation will be applied. The Time Driven ABC model will be conducted in OMX´s Servicedesk unit within the IT services.

In this master?s thesis the problem of simulating conditional Bernoulli distributed stochastic variables, given the sum, is considered. Three simulation methods are considered, namely the acceptance/rejection technique, Bondesson?s method and the Markov chain Monte Carlo method.To compare the three methods the bias and the standard deviations of the simulated variables are evaluated. The results of the simulation study shows that the Markov chain Monte Carlo method is not the best method for this type of simulation.

Today?s market for companies doing statistical surveys is a market consisting of mostly standardized methods where differentiating your company from the competitors is hard. Simultaneously both the society at large and technology in specific is under constant development and everything needs to be done at a faster pace with better precision. One of the companies on the market mentioned above is Tradewell Group AB. During 2008/2009 Tradewell has developed a new method for doing statistical surveys. The method named by Tradewell is called Cellphone Survey System, CSS and include using existing technology in a, for this market, unknown way.

Title:Product abandonment ? A comparative study of five ABB-units Level:Master thesis in Business administration, spring 2011.Purpose:The purpose of this paper is to through a comparative analysis examine how different companies, within the same group, works with product abandonment and what factors influence the process.Problem:How important is situational and product specific factors in a product abandonment process in which the organizational factors are constant?Method:This study is based on primary as well as secondary data where interviews represent the primary data. Interviews, following the same interview guide, were made with five companies within the same group.Result:The results from the empirical studies presented in the text below recurring themes derived from the framework.Conclusions:Our conclusions are that the importance of product specific factors is of significant matters in a product abandonment process, even when organizational factors are constant. We base that on that although the companies are within the same group, under the same strategic direction and constructed according to the same organizational structure the product abandonment process is different for the respective companies.Keywords:Product abandonment, product deletion, product elimination, weak products, ABB .

I dagsläget är det svårt för företag att behålla en stark marknadsposition och utmaningen ligger dels i att regelbundet presentera nya produkter på marknaden och ständigt skapa nya innovationer. Genom att använda sig av Lean Product Development i produktutvecklingsprocessen kan företagen anta utmaningen. Det kan dock vara svårare för små och medelstora företag då de kan ha begränsade resurser. Syftet med denna studie var därför att ta fram en projektmodell för produktutvecklingsprojekt i små och medelstora företag. Studien bygger på kvalitativa forskningsmetoder där sekundärdata samlades in genom både bibliotekskatalogen vid Mittuniversitetet och sökningar i forskningsdatabaser på Internet.

Cache simulator is a tool to increase the understanding of a cache memory. Therefore cache memory simulation is included in the course Computer Engineering IS1200 at the Royal Institution of Technology. The purpose of this project is to develop a cache memory simulator for education. The existing MipsIt and Mips Simulator which is currently used in IS1200 has been the main source of inspiration. This resulted in the development of the cache memory simulator LMSim.

In the spring of 2009 Silva Sweden AB was contacted for a collaboration within the scope of a MasterThesis project. The company had discussed the possibility to develop a device that monitors usermovement during different types of exercise. The objective of this Master Thesis has therefore been todevelop and design a multi training device that records the user?s physical performance during severalactivities. The purpose of the thesis project has been to use scientific methods for product development inorder to design a multi device that supplements Silva?s range of products.The project followed a product development process divided into four phases; Market Analysis, ConceptCreation, Concept Development and Construction.

Many research reports mention the fact that a huge number of all system development projects never reach a successful ending; with other words never fulfil formulated goals. By identifying and forming success factors (and in some aspect risk factors) that the project manager in practice can use, this study may be seen as a step in the direction towards minimising the high number of failed system development projects. The purpose of this research report is to investigate how a system development project, where the development process is based on a specific development or process model (in this case the Waterfall model), can and should be driven. I aim to clarify what is demanded of a project leader for the specific development process and give an account for which eventual leadership qualities that can be well suited for given situation in relation to the need for technical competence. Among other things the project manager should inspire confidence, drive, be a decision maker, engage and own some form of basic knowledge in the field of system development.