ABB Capacitors Ludvika started their LEAN-project in november 2010, but still has not the whole factory been introduced to the LEAN-tool called 5S. 5S is only implemented on the ?easiest? work-areas.By implementing 5S, at the workingstation called inburkningen, would make the workstation and the area around it much more structured, clean and systematized. The operators are a little bit skeptical to the work that includes continuous improvement today, because they can not see any progresses. If 5S were implememted the operators would be able to avoid searching for tools because with 5S, each tool will have a specified place at the workstation.5S would simplify the cooperation between the shifts, because 5S includes clear instructions for how the workstations will be cleaned after each shift.This report will include my recommendations, thoughts and opinions regarding however ABB Capacitors Ludvika should implement or not implement the LEAN-tool 5S.

The purpose of the study is to highlight the issue of student loans securitization, and assure the importance and benefits that could be realized by performing such a transaction. The methodology is a case study for The National Board of Student Aid. It is a qualitative study, mainly using interviews, literature and scientific articles. By using this information we construct a securitization transaction structure ?CSN 2006-1?, and conduct a cost/benefit analysis.

How is research and science being used in political debate? An idea analysis of the debate about försäkringsmedicinskt beslutsstöd (decision tool in healthcare security)This is a case study on different types of research use (utilization) The aim of this paper is to examine how the politicians make use of expertise and research in the parliamentary debate surrounding the decision tool in healthcare security (försäkringsmedicinskt beslutsstöd). The aim is also to find out to what extent different types of research use are present in this debate. In this case study the qualitative method of idea analysis is being used on the empirical material. The tool of analysis is based upon the theories of research use by Amara et al.

Leaders have many tools in their toolbox when it comes to managing their firms, assuring that they are moving in the right direction. One of these tools is vision. Vision can be a powerful tool for steering a company. But to be able to use it fully, you must also understand how vision is best conveyed to employees and followers. If you understand the vision as a tool, you can fully utilize it.

The purpose of this study was to investigate and compare how and why consumers of different ethnic backgrounds value and prioritize product attributes among food in certain ways. We expected to find culturally bound attitude differences and our aim was to relate those to, and challenge, present knowledge of information structures. Consequently, we also aimed to use this new knowledge of attribute attitudes in connection to assortment variety theory, as attributes constitute important motives to how consumers perceive variety. A theoretical framework was constructed to suit our purpose and function as an analytical tool, consisting of Culture perspectives, Information structures (product attributes), and Assortment variety. In this thesis we focused on attitudes and consumer perspectives and excluded actual behaviour and the retailing perspective.

The purpose of this essay is to study if and how five South African educators work with music as a special pedagogical tool in children's language development. To achieve the purpose of this study, two research questions were created. As method, interviews of a qualitative character were chosen.  The aim of the method is to give the educators the opportunity to think about and use their own experience before answering the questions.The result shows that the South African educators are not using music as a special educational tool. They rather use music as an everyday educational tool to promote children's language development. The result indicates that music in educational activities promotes children?s communication with each other.

.

This thesis work is made by Torbjörn Johansson on Karlstad University for Uddeholms AB. The assignment in this thesis work was to investigate tough cutting in three different tool steels: Vanadis 4 Extra, Vancron 40 and Sverker 21. The research was to compare the wear of the tool after cutting in each one of the tool steel alloys. The research was also made to see if the tool cutting in Vancron 40 has a better wear than the tool cutting in Vanadis 4 Extra and also compare the results with Sverker 21. All three of these alloys are a part of Uddeholms AB:s range of products, and is used in applications like forming tools and knife tools. Vancron 40 is a powder steel with a very good combination of mechanical properties like ductility, adhesive strength and hardness.

The report describes an ecodesign thesis performed by the author at the ÅF EcoDesign Center. The basic idea of ecodesign is to develop products with a minimized environmental load, without neglecting other significant product aspects such as function and price. During the last couple of years the public interest in environmental friendly products has increased, which has made it possible for companies to make a profit from their investments in ecodesign. To meet the increasing market for ecodesign services ÅF started the ÅF EcoDesign Center, where the company has gathered all of their competence in ecodesign in order to help companies to become greener. The task was to develop a tool for an Eco Screening.

En sammanfattning av uppsatsen på maximalt 8000 tecken.The purpose of this study was to analyse if there are in-store consumer behaviour differences between the consumers that use ASF and the consumers that not use ASF in store. More precisely this study had two objectives. The first objective was to create a conceptual model depicting the various behavioural effects that the use of ASF may result in. These variables were tested empirically in order to analyze if the use of ASF influence in-store consumer behaviour. The second objective was to analyze if there are differences in the routes taken by the consumers in store, in relation to whether the consumers use the ASF or not..

This thesis examines the approach for implementing strategy that has been applied by the study object, Svenska Spel. The specific approach originates from the theories of Elliot Jaques, whose key proposal is that individuals have different capability of carrying out tasks over different time-spans. The main purpose of the study is to analyze how the approach has influenced the management control systems in use, in order to ensure that the strategy is successfully implemented on corporate as well as operational level. Twenty in debt interviews conducted with employees, representing a vertical cross section throughout the organization, are the main source of the study?s empirical foundation.

The public service within health and care has changed remarkably during the last 30 years. It has been inspired by management ideas from profit-making businesses. Those thoughts are an umbrella term called Nex public management. In what way has New public management influenced the public service in Sweden? Important concepts in the change of public service are quality, effektivity and goals.

Due to a constantly increasing competitive pressure it is of great importance to constantly strive for improvements in order to gain competitive advantages. Lean Production is a concept that has been introduced with the aim to minimize waste and increase profitability. The purpose of this report is therefore to investigate how to perform effective planning according to the principles of Lean Production, in companys with customer exclusive products, through a case study at Sandvik Mining and Construction (SMC), and to investigate how SMC kan improve their planning of drifting rods at the production unit in Sandviken.The study started by creating a theoretical framework, to describe the subject planning and planning based on Lean Production. This frame work constituted the base for the case study which took place at Sandvik Mining and Construction, and also for the model and planning tool that has been introduced.The result of the study is partly a general model with factors that contribute to a more effective planning. These factors has beed identifed as SMED, which focuses on reducing set up times and in the end to facilitate the planning.

The purpose of this essay is to investigate if the companies listed on Nasdaq/OMX Stockholm Large Cap use the earnings management phenomenon Big Bath Accounting to a greater extent when a change of management (CEO) is made.Management tends to use earnings management when there is a bonus plan linked to the result of the company. To gain maximum bonus the management will try to manipulate the result in a way that in a long term maximize their utility. Through the earnings management technique Big Bath the management is given the possibility to take one large cost as a one-time expend, even though the cost is supposed to run over several financial years. This, of course, within the legal framework. A big bath may occur when there is an impairment of goodwill, tangible and/or intangible assets or larger provisions for future expense, or both of them at the same time..

En sammanfattning av uppsatsen på maximalt 8000 tecken..