Syftet med denna studie har varit att undersöka relevansen i tre olika teorier som förklarar hur Flow kan upplevas på en arbetsplats. Teorierna är skapade efter forskning från Csikzentmihaly, Hofstede samt Maslow. Undersökningen har skett på två olika arbetsplatser inom två olika yrkesgrenar för att finna om eventuella skillnader mellan dessa två arbetskontext kan påverka upplevelsen av Flow. Det ena företaget kategoriseras som en affärsmiljö och det andra företaget rubriceras som en kontorsmiljö. Tre hypoteser skapades som var för sig testade de tre teoriernas effekt på Flow.

In today?s changing environment, creation of projects by organizations has become more common. The problem is, though, that the knowledge of the subject is still limited which causes many projects to fail. This has made it extra important to have a good project manager whocanlead the project in the right direction. While doing this both the project method and the project manager?s motivation are contributing sources.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

Detta arbete har utförts för att undersöka frågeställningen ?Hur bör ett dataspels tutorial designas för att spelaren ska lära sig samtidigt som den främjar uppkomsten av flow??. För att besvara detta har teorier inom pedagogik, lärande av spel, användbarhet och flow samt mer generella teorier kring spel studerats för att skapa en teoribildning inom området. För att testa detta har ett spel med två olika tutorials skapats. Detta spel har sedan använts för att, med hjälp av två testgrupper, samla data om hur spelare lär sig samt deras flowupplevelse.

Detta arbete syftar till att undersöka hur Csikszentmihalyis teorier kring optimala upplevelser, eller flow-upplevelser, kan appliceras på praktisk speldesign. I arbetet kombineras Csikszentmihalyis definition av begreppet flow med Jenova Chens riktlinjer för flow-uppmuntrande design i singleplayerspel för att ge underlag för framtagandet av ett brädspel i vilket applicerbarheten hos deras teorier och riktlinjer på multiplayerspel undersökts. För att teorierna och riktlinjerna effektivt skulle kunna undersökas utvecklades det tre olika versioner av brädspelet som alla innehåller olika element som, enligt Csikszentmihaly och Chen, bör alstra flow. Ett flertal spelgrupper fick spela dessa tre versioner och via enkätundersökningar och intervjuer förmedla hur de upplevde de olika versionerna, både som individuella produkter och i jämförelse med varandra. De data som erhålldes från dessa undersökningar indikerade på att nivån av kontroll spelaren har över sin spelsituation spelar en väldigt avgörande roll i hur han eller hon upplever spelaktiviteten i sin helhet..

This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

A good flow of information in organizations is one of the key aspects of how we define a well-functioning organization. The information flow could be internal as well as external between actors within as well as outside of the organization. In a logistics organization this flow of information is equally important as in any other kind of organization. In this paper we have explored information flows in logistics organizations by applying, boundary spanning and the mobile-stationary divide perspective. In boundary spanning the main goal is to erase or relocate some of the boundaries within an organization, in our case to make the flow of information internally as well as externally better.

A good flow of information in organizations is one of the key aspects of how we define a well-functioning organization. The information flow could be internal as well as external between actors within as well as outside of the organization. In a logistics organization this flow of information is equally important as in any other kind of organization. In this paper we have explored information flows in logistics organizations by applying, boundary spanning and the mobile-stationary divide perspective. In boundary spanning the main goal is to erase or relocate some of the boundaries within an organization, in our case to make the flow of information internally as well as externally better.

This project investigates how team sports can be used to include young women in public space aswell as how through the addition of a sporting facility adjacent to three schools can be used as a stepping stone for the young people of Dharavi to have a chance at a brighter future..

At Forsmarks Kraftgrupp AB (FKA) forces on pipe systems due to transient flow are frequently calculated as a step to verify their structural integrity. In nuclear industries these forces are often calculated with a one dimensional thermal-hydraulic analysis-code called RELAP5. When calculations regarding more complex geometries are needed, the three dimensional code Fluent is often used. This code is highly time consuming and requires large computational power.This projects aim is to compare calculations of pressure, flow and forces carried out by RELAP5 and Fluent for an arbitrary pipe section during transient flow conditions. This has been accomplished by constructing a simple geometry for which a transient flow is simulated in both programs.

More than half of the implemented IT-projects go over budget, deadline or simply fail. The processes in an IT-project requires technical competence to be present among the project participants to ensure the achievement of business goals and to make organisations competitive. The success of an IT-project largely depends on the project manager which makes it interesting to further investigate what impact the project manager?s technical competence has on the project. Previous research shows differing opinions whether technical competence is considered important for the project manager to be successful or not.

I denna rapport predikteras livslängden, med avseende på utmattning, för en hjullastarskopa. Två av de mest kritiska svetsarna utvärderas enligt IIW:s (International Institute of Welding) rekommendationer genom nominella spänningsmetoden, hot spot-metoden och effective notch-metoden. Beräkningarna utförs med hjälp av finita elementmetoden. Genom att utföra töjningsmätningar på hjullastarskopan i drift erhålls spänningsdiagram. Dessa uppmätta spänningsdiagram analyseras med rain-flow count-metoden.

The thesis work has been carried out at Volvo Aero Corporation (VAC) in Trollhättan. VAC has entered a partnership as developing and producing partner with engine manufacturer Pratt & Whitney and is currently at the starting phase of producing the turbine rear frame (TEC) to the engine PW1000.The purpose of this study was to create a report on process level that describes the conditions and the potential with PW1000 TEC to reach the product cost calculation taking into account lead times and describe alternative method solutions.The report describes a comparison between the present flow (2012), a flow based on product cost calculation (2016) and a potential flow (2016). The work has mainly been based on acquiring the knowledge and information available to inspect the present flow; this has been done by workshop observations, meetings and gathering of the information that is available on the work site for the PW1000 TEC.The information obtained has been merged into an Excel document, called Roadmap. It serves as a roadmap with current situation as the start and the potential flow for 2016 as the goal. With the roadmap as a tool, assumptions have been taken considering the flow and how it will change, where processes have been eliminated, reduced or marked as a problem..