The purpose of the project was to make a system that could extract data from a mobile eye tracker and make it comparable with data from visual stimuli. The produced system was programmed in Java and provided all the necessary parts that were required to achieve the purpose. This provides a foundation for further research to determine whether the eye tracker is sufficiently accurate to diagnose Parkinson?s disease..

The purpose of our study is to determine whether a membership in FRII exercise any influence over the fundraising organizations accounting and work, and if that?s the case we want to study the effects.We began with a search for information about the theories we intended to use in our study and to establish hypotheses. We came to the conclusion that the agency theory and the stakeholder model were the most relevant theories for our work. We also chose to discuss problems in accounting, legitimacy theory and standard setting.We decided to conduct a total opinon poll due to the fact that FRII only have approximately seventy members. We also decided to conduct a cross section approach which means that the attempt of our study is broad but rather shallow.

The aim of the project is to develop a tool for a management system at the advertising agency ofConfetti. The company has during a longer period of time felt a need of introducing a quality and environmentalsystem but have a lack in resources of knowledge, time and money. Their goal is to have aconcrete documentation which describes their quality policy and the function of the activity.The work has been performed by mapping and analyzing the processes of the company according tothe process model with focus on one pilot process. New routines have been developed and documentedin a management system.Confetti would like their management system to fulfil the ISO-standard so that they eventually inthe future can be certified. Therefore a literature study has been done according to management systemsand standards.

Research and Development-costs constitutes an important part in contemporary companies. R&D are treated differently depending on their definition and how the historic value is decided. The main goal for this essay is to bring clarity to how the definiton of the term R&D is decided in accounting as well as in tax law. Another goal is to decide how the historic value is calculated. It is also interesting to examine under which circumstances the costs can be activated in the balance sheet, and under which circumstances deduction for the R&D-costs may be allowed.

This project is part of the course MF10YX, introductory mechatronics. The purpose of theproject is to integrate modules from the group members previous specializations into amechatronic system in the form of a self-balancing robot. The prototype ?Charlie? should be ableto race along a 10 - 30 m line. It should be able to start manually and autonomously detect andstop after the finishing line.

The aim of this thesis was to investigate the possibility of integrating an item tracking systemwith a monitoring system currently under development at Fifth Generation Technologies (P) Ltd.A literature study of RFID technology and the networks ZigBee and MiWi was done. Based onthe literature study a concept for a distributed system was developed.The concept is to have several RFID readers placed in the area where tracking is to be performedand allow them to communicate with each other through wireless communication. The RFIDreaders shall be able to form zones and filter the data that is forwarded from the zones to theservers and thus perform some of the work that the server would normally have to do. Theconcept has been evaluated by prototype development and testing. The prototype uses an ultrahigh frequency RFID reader and a MiWi network.The test indicated some limitations with the selected technologies.

Background: The basis for a price valuation of a company is dependent on both its assets net worth and earnings calculations. While the assets are an important part of the valuation of a company, it is important that the valuation is reliable and resource usage can be measured and allocated to each time period. Purpose: The purpose of this essay is to illustrate the difficulties when valuating and allocating own produced fixed assets. Accomplishment: We have chosen a case study where the aims are to understand and explain the difficulties with valuating and allocating own produced fixed assets. The research is based on nine personal interviews.

Introduction: This thesis is about how the accounting entry provisions are linked to corporate market value. By statistically examining accounting and share data for 56 companies listed on NASDAQ OMX Stockholm, the question of whether accounting information regarding provisions are value relevant for investors is studied. Listed companies shall follow the rules of IAS 37 ? Provisions, Contingent liabilities and Contingent assets, when preparing financial statements.Aim: The purpose of this thesis is to examine the relationship between reported information about provisions and investors assessment of listed companies that comply with IFRS-regulations, by statistically testing the value relevance of the accounting entry.Method: The study is based on a quantitative, deductive methodological approach. The value relevance of provisions is examined by statistically testing the collected empirical data based on the two models that is described in the reference frame.Results: The conclusion to be drawn from the study is that reported provisions have no statistically significant association with return on shares and thus is not value relevant.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

This paper exposes the problems and challenges organizations face when integrating aged systems, web based systems and web services. The paper focuses on how people with different titles in an organization experience systems integration and the factors that contribute to project failure or success. The research methodology used in this is Grounded Theory and the resulting theory of this paper has taken form through the coding of transcribed interviews, which have gone through a constant comparing to other theories in the area of interest, mostly articles about success factors in system integration. The resulting outcome is a success model aimed to describe the underlying indicators to achieve project success.The success model consists of three factors that contribute to success in integration projects. The factors are: globalization, governance and balance.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

There is a settled stereotype for women and men which give them different possibilities in our society. The schools, which are one of the most important sources of knowledge, have a great possibility to influence. This is the reason why we are interested in how the schools are working with a project, which we will call X henceforth. What was the purpose with the project and what does it contain? What is missing in the former education, since the project was started? Are there any obstacles or prerequisite in the design of the project or in the school teaching on the basis of X? We have done interviews in the gathering of empirical material to find out all the answers to our questions.

Background: The valuation of growing crops is problematic partly due to weather conditions. 2011 showed that of all cultivated crops 42% were autumn sown which makes up a significant proportion of the total arable land in Sweden. This presented an opportunity to investigate more closely the methods and options used in the inventory valuation of biological assets. Problem: What options are there in the valuation of own-produced inventory specifically in the form of growing crops? Objective: This study's aim is to create an increased understanding of an agricultural company's options for inventory valuation of biological assets. In the survey of the options this study has found two main categories: rule-and principle-based accounting. Methods: A qualitative study with an abductive approach.

The project involves implementing a finished dispersion model into ArcGIS. The goal of the tool is to show how dangerous and toxic substances will travel in the ground after long periods. The goal of the project is to understand GIS in general, what it is used for and gain an insight into how developing tools for ArcGIS is, what challenges might exists. Understanding the type of data that can be stored and accessed in ArcGIS a long with the tools and functionality offered by the system when using Python as the main language for development. A prototype of the tool is created..