System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop functionality.

Concurrently with higher demands on comparability between companies, all Swedish listed parent companies are guilty to apply international accounting standards, IFRS/IAS, no later than January 1, 2005. In this thesis IFRS 7 Financial instruments: Disclosures, that treats information about financial instruments, is investigated. IFRS 7 aims to establish a good international standard for disclosures about financial instruments. The purpose of this thesis is to study differences in the interpretation of IFRS 7 Financial instruments: Disclosures between Swedish life insurance companies, problems ? if any ? that associate with the recommendation, the recommendation?s effect on accounting and the attitudes towards IFRS amongst the Swedish life insurance companies.

This report describes a master thesis performed at Saab in Arboga. The main purpose was to build a controller for a system containing a turn table and an antenna beam. The idea is to use this system on a boat where it will be exposed to position disturbances due to waves. The desired behaviour is that antennas placed on the antenna beam should point towards the same target all the time. To solve this problem the system has been modeled and simulated in Matlab and Simulink.

The purpose of this study is to create a method that can be used to produce decisionsupport data for the climate goals of a municipality. The method should be able to demonstrate the potential for reducing energy use and greenhouse gas emissions for measures aimed at the stationary energy system in the municipality. It will be used to make longterm projections of energy use and greenhouse gas emissions in order to be able to demonstrate the ability to reach climate goals. The aim was also to test the method's applicability by using the municipality of Uppsala and the Uppsala climate protocol project in a case study. Uppsala climate protocol is a project consisting of participants from business, government and organizations that voluntarily want to commit to reducing their carbon footprint by reducing their energy use and thus work to achieve the municipality's overall climate goal. Public reporting of energy use and climate impact has been studied in order to examine the nature of indicators and accounting figures that are commonly used in the field and how long-term forecasts are formulated. In connection to this, the type and sources for the kind of data needed was also examined.

The number of locals in Stockholm who chooses the bike in front of public transport has increased significantly in recent years. The product purchaser of this project, Joakim Victorin at Sigma AB, has a keen interest in cycling, which resulted in a fairly obvious topic of this project; through a web application Sigma AB wanted to make it possible to handle results from professional as well as amateur competitions in cycling.The purpose of this web application is to simplify reporting and handling of competition for both small and bigger bicycle races. By providing the users of the system a platform independent client, any available device may be used.This thesis has followed the development principles which prevail on the ASP .NET MVC 3 concept. When developing the system the Microsoft Visual Studio 2010 development environment was used. The framework and the pattern of ASP .NET MVC 3 is a prominent part of today?s web development.

During 2001-2002 a prototype, IMIS (Integrated Mobile Information System) was developed at BTH (Blekinge University of Technology) to demonstrate how mobile IT-systems can be used in healthcare. The prototype was based on the activity theory of Engeström. An ongoing project started in spring 2003. The purpose of the project is further development of IMIS with special focus in the diabetes healthcare. Participants in the project are scientists and students at BTH, ALMI Företagspartner, Blekinge FoU-enhet, Barndiabetesförbundet Blekinge, Blekinge Diabetesförening, Vårdcentralen Ronneby and Vårdcentralen Sölvesborg.

The first of January 2005 all companies listed on a stock exchange within the European Unionhad to implement International Financial Accounting Standards (IFRS) in their annual report.But is this regulation for the good or worse and does the benefits outweigh the cost? The goalwith the regulation is to make it easier for investors, shareholders and other stakeholders tomake financial decisions, compare domestic as well as international companies at the samecondition. One of the differences with the introduction of the new regulation is IFRS 3 thathandles business combination and how goodwill and intangible assets from the acquiredcompany should be accounted for. The objectives of our dissertation is to identify those listedcompanies that have made one or more acquisition between the years 2005 to 2006 andmeasure their level of disclosure concerning goodwill and intangible assets through theacquisition. We concluded trough the results that positive accounting theory and systemorientated theory didn?t explain all the verities in the companies? disclosures.

This project aims at investigating if the use of UML as a support to small-scale development ofan embedded system is relevant. The investigation is conducted by using UML during the initialphase of the development ofTelfafill, a filling machine by the company ?Telfafill AB?. The aimof the development of Telfafill is to separate the user interface from the control unit. In additionto this main objective, Telfafill AB would like possible changes to, and additions of,functionality of the filling machine to be investigated.Within the boundaries of this project, the development of Telfafill reached a full requirementspecification of the proposed system, and contact was made with potential external developers.No prototype construction had been started when the project ended.

This is a result of a diploma work in construction engineering. The purpose of this thesis is to investigate the nature of the productivity in a given project and how the Skanska productivity tools were used in this project.Interviews were held among workers and management to get some answers on what affected the work and its productivity. The result of the thesis showed that the productivity tools as propulsion analysis and ?goal cards?, were not used to a wide extent in this project. Furthermore there was almost no feedback for the one who made the calculation and the offer for the project, which might affect the results on projects negatively in the future.Within the project there was a lot of waiting time which affected the productivity.

This report is an examination paper in computer science at University of Växjö. The report will focus on the possibility to create adaptable systems and to cost calculate the work needed to modify a system to meet new demands. A project [demos] developed by Interactive Institute studio [12-21] in Växjö is the starting point in our work. They have during a period of two years developed a prototype of a system which intends to get youth and democratic selected representatives a communication platform where they may communicate with SMS. Today they are in a position when they want to develop the system for other user groups with slighter different purpose and to do that they need a more flexible system.

The purpose of this study is to create a method that can be used to produce decision supportdata for the climate goals of a municipality. The method should be able to demonstrate the potential for reducing energy use and greenhouse gas emissions for measures aimed at the stationary energy system in the municipality. It will be used to make long term projections of energy use and greenhouse gas emissions in order to be able to demonstrate the ability to reach climate goals. The aim was also to test the method's applicability by using the municipality of Uppsala and the Uppsala climate protocol project in a case study. Uppsala climate protocol is a project consisting of participants from business, government and organizations that voluntarily want to commit to reducing their carbon footprint by reducing their energy use and thus work to achieve the municipality's overall climate goal.

Our starting point has been to examine how a project manager without knowledge of the industry is able to plan a project. And also which difficulties that may arise. A qualitative study was conducted at project managers who worked in the construction industry and events industry. Seven interviews were conducted, four in the construction sector and three in the events industry. Respondents are active as project manager in Värmland and Närkes counties.

Purpose:Our purpose with this essay was to see how a health promotion initiative could be profitability and how human resource cost accounting could be used for decision making. Does it cost more than it taste? Method:We have been using qualitative interviews with politicians, human health developerand accountants in a municipality. We have also collected data from a university lecturer which shows numbers from the health promotion initiative and how it is been affecting the involved staff. Result:The result show us that the politicians, human health developer and accountants all want to introduce physical exercising at work.

In industry applications, such as power supply plants, the issue of interaction between fluid and structure is always presented. More precisely, the fluid flow affects the structure by applying force(s) on it and vice versa. As a result, the structure can move (vibrate) or deform. A good understanding of this problem can help to design the system in term of safety, stability and efficiency.This project aims to optimize and test the Unicorn FSI solver from the FEniCS project [1] to simulate the interaction of fluid and structure in an experiment, which was carried out at Vattenfall Research and Development. The target is to improve the Unicorn FSI solver to cope with a real industrial problem.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..