Nutrient enrichment is the main cause of the increasing eutrophication process in the Baltic Sea during last century. A prerequisite counteract this process the load of nutrients to the Sea must be investigated. The large contribution of nutrients to the Sea is caused by emission from the rivers within the drainage basin. For the total emission of nutrient into the Sea the retention process in the rivers has big influence. This process in the river system has been assumed as a not important part of the nutrient cycle.

The component workshop at Atlas Copco inTierp intends to reduce the costs inorder to increase their competitiveness.This thesis examines how the productionmanagement around cylinder washersshould be managed in a way that meetsthe customer needs. The customer to thecylinder washer is Atlas Copcos assemblydepartment in Tierp.The purpose of this thesis is to providean alternative way of managing theproduction. A chapter of theory is addedto give the reader an insight ofdifferent types of production managementsystems as well as the underlyingknowledge needed to get a better readingexperience. An introduction of kanbancan in theory help Atlas Copco in thedirection they strive. It should beclear how the purpose of this thesisaffects the cost for the componentworkshop and also how it relates to thecurrent production.

This study was a degree in Master of Science in agriculture with specialization in animal science for the Department of animal nutrition and management at SLU. The subject was created by AS-Faktor, a small company for science and development within the company Lantmännen AB. It was a test of the effect of SPC (Special Processed Cereals) on induction of the endogenous protein AF (an antisecretory factor) in plasma and intestinal lumen in broilers. Previous results have shown positive effects on different intestinal diseases in pigs, horses, dogs as well as in humans. Beside the induction we also studied the effects on results in a conventional slaughter chicken production, including the ability of SPC to compete with or be affected by the coccidiostat, Salinomax.When diarrhoea occurs, it's because there is an imbalance between the secretion and the absorption and it can be caused by for example toxins.

A protection helmet for young people (3-7 years) in winter environment has been developed in this thesis. The result is a concept proposal for development at STIGA Sports AB in Eskilstuna. This thesis work has been performed during 20 weeks, for a Master of Science in Product and Process development at Mälardalen University Eskilstuna Sweden in September 2009 to January 2010. The helmet is shown as a CAD model with detailed solutions to the outer shell, interior and adjustability (in sizes 50-56 cm) which are the three focused areas in the development. Also a physical model in scale 1:1 has been developed and is shown in this thesis work.To achieve the best result possible the process started with an analysis of the market and the product.

Ethanol produced from lignocellulosic biomass has the potential to become a promisingalternative to gasoline. In this work the simultaneous saccharification and fermentation (SSF)technology was applied for ethanol production from hardwood with focus on cell growth,ethanol production and contamination.The SSF was performed at PH 5.5 and 35°C for different suspended solid concentrations(8%, 10% and 12%) of pretreated birch slurry which contained 16 % total suspended solids.Two different hexose fermenting yeast strain (Ethanol Red) and pentose fermenting yeaststrain were used.Quantifying the concentration of chemical components and metabolites in the fermentationmedium demonstrated that glucose and xylose are the major fermentable sugars in the slurry.The higher load of slurry (12%) represents a higher content of carbohydrates and potentiallyhigher end concentration of ethanol. Moreover, more lactic acid is produced with the lowerload of slurry (8 % or 10 %), presumably due to a result of a less inhibitory environment forbacterial growth. In this context, acetic acid sticks out as the most important inhibitor withconcentrations of 15.2 and 12.5 and 9.7 g/l respectively in the 12 %, 10 % and 8 % (ofsuspended solids) trials. Using pentose fermenting yeast may lead to higher ethanolproduction, lower xylose uptake and lower lactic acid formation.

It's not a secret that most companies strive to get such a high economic return as possible. To successfully engage in a profitable enterprise, there are many elements that come into play. An important element is the motivation of the employees and their work performance. Work motivation is a key factor for the employees to improve their performance and therefore determinant for the successes of the company.This work is a case study in the production at Fresenius Kabi, Uppsala. The work is based on an employee survey that they fill out once a year and the aim is to develop a deeper understanding for these questions and how the employees see on leadership, communication and goal-setting as motivators and how these factors works in the company today.To get this deeper understanding I have used a qualitative approach.

Sheep breeding contributes not only with wool, hides, meat and milk but also with openlandscapes. The sheep?s wool is a good raw material thanks to a lot of different qualities as itis water rejecting and easy to form. The wool production today is concentrated to specificplaces in the world which leads to environmental problems and a distorted market. InJämtland, a province in Sweden, there is right now a staking going on for local production andrefining of wool in a project called Ullforum.

The purpose of this Bachelor?s thesis is to describe and analyze the implementation of Facebook in a public library. A case study consisting of qualitative interviews and studies of documents containing goals for the library has been conducted at a public library going through the process of implementing Facebook in their operations. The theoretical framework for this study consists of Everett M. Rogers?s stages of the innovation-decision process and his characteristics of innovations as perceived by individuals.

Följande rapport är resultatet av det examensarbete som utförts våren 2011 inom innovativ produktion/logistik vid Mälardalens Högskola. Examensarbete behandlar ämnet Green Production med fokus på skillnader mellan ett produktionssystem som bygger på Lean Production och ett som bygger på Green Production. Områden som berörs i rapporten är de verktyg som används i de olika produktionssystemen, hur arbetet med miljöförbättrande åtgärder kan se ut i praktiken samt vilka svårigheter som finns vid arbete med miljöförbättrande åtgärder i ett företag. Examensarbetet består av en litteraturstudie där aktuell litteratur studerats inom området samt en intervjustudie som genomförts med insatta inom miljöfrågor kopplat till produktion samt operatörer.Bakgrunden till examensarbetet grundar sig i att världen står inför en framtid där många utav de råmaterial som används idag vid produktion inte kommer att kunna nyttjas i framtiden. Detta i kombination med de miljöproblem som människan åsamkat, har bidragit till att många företag insett att miljöaspekter måste vara i åtanke genom hela produktionsprocessen.Den uppfattning som erhållits genom intervjustudierna är att det är viktigt för ett företag att visa att de arbetar med miljöförbättrande åtgärder.

Several technical solutions are ready to step forward as the new generation of propellant, and this report aims to explore the possibility of commercializing fuel cell cars. The report is based on current research and data from today's technology and engineering solutions that are estimated to be commercially realized before 2020.A mapping of today?s different fuel cell options has shown that the most suitable fuel cell option is the Proton Exchange Membrane Fuel Cell, which uses hydrogen as fuel. The report is focusing on a techno-economic well-to-wheel analysis of hydrogen and the energy balance and costs in a system perspective. The basis for this analysis consists of two centralized methods of production, steam methane reforming (SMR), and alkaline water electrolysis.

A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

The aim with this literature review is to describe the ensilage process in a bunker silo. The process from harvest and chopping to filling and unloading the silo is explained. The sealing of the bunker silo plays an important role for the final quality of the silage. This review covers some of the techniques used. There are many silage additives on the market, some of them are presented including how they act in the ensilage process.

This essay describes a single case self-study of a music composer in order to track the compositional process in real time. In the study the subject and the researcher are the same person. The study builds on previous empirical studies that have used methodological approaches such as analysis of computer-based digital data collection, verbal protocol and video observations. It deals with issues of the compositional process related to for example time consumption, number of artistic decisions, the different roles and skills of a music composer, and methods of research in the musical composition process. During three shifts the researcher worked as a music composer dealing with the issue of converting an audio sketch of a composition into a representative finished audio product.

How does IT-consultants reason in their consulting process regarding the development of a clients IT-based internal recruitment system? The purpose with this paper is to investigate how an IT-consultant is reasoning in a consulting process and investigate whether consultants are using established models and methods in their work. We have chosen to work with a qualitative examination to attain our purpose. In our work gathering the empirical facts we have been working with a case study, an observation and a simulation exercise. The combination of these has made it possible to carry out the paper and produce the most correct data possible. Conclusion: We state that IT-consultants do not use any theory-based methods, they use process methods created by themselves and their company.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.