This exam report has been developed in association with Strangbetong AB, Sweden.The natural gravel that is being used as fine aggregate for concrete production today is an ending natural recourse and the Swedish government has decided to strongly reduce the extraction from the year of 2020. The only reasonable replacement is aggregates from crushed rocks but this material has other properties than natural aggregates. The concrete manufacturers now have to learn how to use these new fine aggregates in a cost effective way in order to ensure the quality of their concrete production.In this project, crushed aggregates and combination of crushed and natural aggregates have been tested with existing formulas for fresh concrete. The two parameters yield stress and plastic viscosity have been measured which gives a good description of the workability of the fresh concrete. Different methods to make measurements on the dry fine aggregates, has also been tested, to find out if there is any correlations between these parameters and the parameters from the measurement on the fresh concrete..

This master thesis is about the collaboration between the custom dairy heifer grower and thedairy producer.The custom dairy heifer grower is a rather unusual strategy of reproductive management inSweden compared to other countries like U.S. and Denmark where the specialization withindairy production gone much further. In these countries the research also has reached muchfurther within this type of industry. However in Sweden there has been research made in thearea of collaboration, but then only within collaborations in the industries of crop production,dairy production and pork meat.The down going trend of profitability within dairy production together with poor profitabilityin the beef industry could partly remedy if more collaborations around heifer contractingwould arise. But since the industry still is of a rare kind in Sweden the knowledge about howthese types of collaborative arrangements works and their contracts are put together is poor.By that the aim of this master thesis is formulated as follows: "how is usually thecollaborative arrangement between the dairy producer and custom dairy heifer growerdesigned".

???Information Technology is an essential part of the society today, not least in large ???organisations dealing with sensitive information. An example of such an organisation is the Swedish Armed Forces which indeed is in the need of ways to ensure information security in their Information Technology systems. The means which is used is an authorisation and accreditation process.All Information Technology systems go through a life cycle which includes realisation, usage, development and liquidation. In the Swedish Armed Forces the lifecycle is an authorisation process.

Sheep breeding contributes not only with wool, hides, meat and milk but also with openlandscapes. The sheep?s wool is a good raw material thanks to a lot of different qualities as itis water rejecting and easy to form. The wool production today is concentrated to specificplaces in the world which leads to environmental problems and a distorted market. InJämtland, a province in Sweden, there is right now a staking going on for local production andrefining of wool in a project called Ullforum.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

The agriculture is today in a development that leads to bigger and bigger units in the primary production. To be able to follow this development many companies chooses to cooperate in different ways. The most radical change is when farmers fuses with other farmers and merge into to a big collectively owned operation firm. The reason behind this idea is that the firms achieve the big companies advantages by being complement to each other. The purpose of this essay is to make an economic analysis of two crop production companies who works together in an operation firm.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

Ocean Thermal Energy Conversion (OTEC) is a technology that utilizes the temperaturedifference in oceans between the warm surface water and the cold water at 1000 m depthto produce electricity. The purpose of this report is to investigate if OTEC with its synergiescould become a commercially feasible energy solution for a small island. A literature reviewis conducted to explore the different OTEC technologies and to what extent the threesynergies; fresh water, air conditioning and aquaculture, could be used. In order to calculatethe profitability of these synergies there is also a study conducted on the conventionalmethods and cost of fresh water production, aquaculture and air conditioning. A model is setup using a scenario of a small tropical Island with population of 100 000 people.

Den ökade förändringstakten i samhället på grund av ny teknik, internationalisering och att samhället blivit alltmer mångkulturellt bidrar till att större krav ställs på företag att hela tiden förbättra sin verksamhet. Akzo Nobel Surface Chemistry, Production Surfactants i Stenungsund, har huvudsakligen sina kunder och konkurrenter runt om i Europa. Då Sverige ligger i utkanten av detta område tar det omkring en leveransdag längre tid för Production Surfactants att leverera sina produkter i jämförelse med företagets konkurrenter. Detta medför att Production Surfactants behöver kompensera denna längre leveranstid genom exempelvis högre produktkvalitet, större flexibilitet eller lägre priser för att ha möjlighet att tävla på marknaden. För att uppnå detta behöver Production Surfactants utveckla och systematisera sitt förbättringsarbete.

Virtual Design and Construction (VDC) is the definition for using BIM in the construction process to simulate and analyse the building. Resulting use of the technology will according to proponents lead to fewer construction errors, a better understanding between stakeholders for the construction project, less communication problems and a smoother construction process. Although BIM has according to researchers a big potential, few companies have succeeded in broad and continues implementation. The study aims to identify the factors affecting the implementation. More precisely identify what factors influencing the decision to adopt VDC and potential barriers in the diffusion process. The empirical findings are based on a case study of NCC Construction Sweden.

This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.

Utvecklingen inom IT-området har under de senaste åren varit explosionsartad. Allt fler branscher har börjat att leta efter nya sätt att tillämpa de olika framsteg som skett inom områdetDetta arbete behandlar en kombinerad litteraturstudie och intervjuundersökning kring objektorientering och Business Process Reengineering. Problemställningen för detta arbete har varit:- På vilka sätt kan objektorientering tillämpas för att utveckla de synsätt och de metoder som används inom Business Process ReengineeringSyftet med arbetet var att hitta ett antal generella tillämpningsområden utifrån problemställningen, samt att hitta ett antal fördelar, som dessa generella tillämpningar skulle kunna medföra.Resultatet av detta arbete visar att det finns områden inom Business Process Reengineering, där en objektorienterad tillämpning skulle kunna medför stora fördelar. Som exempel på detta kan nämnas förbättrade möjligheter att skapa och anpassa de informationssystem som skall stötta verksamhetsprocesserna. Även möjligheterna att skapa dynamiska metoder, där varje metodsteg utgörs av färdiga moduler som sedan kombineras, bör nämnas som en fördel..

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

Emotional Intelligence (EI) is a highly used concept in contemporary organizations, especially in the recruitment process or education of employees and managers. The aim of this study was to examine the discursive production of the concept emotional intelligence and how it, linked to an organizational context, is expressed in web-based articles and course homepages. In total 11 texts related to emotional intelligence and organizational contexts were used as the object of study. A three-stage model was used as a method for analysis. The model included a content analysis, argument analysis and a deconstruction analysis in order to expose what was said about emotional intelligence and how it was said.

Composting is a process in which organic matter is mineralized by microorganisms. In January 2005 landfilling of organic waste was prohibited in Sweden. With this prohibition composting has become an important alternative to handle the produced organic wastes. One problem with continuous small-scale composting is the production of organic acids that will inhibit a further composting process. The aim of these theses was to study what effects temperature and dry matter content had on the production of organics acids, and what effect the organic acids had on the mineralisation of the substrate as well as the stability during storage of the product.