In 2013 a new emission standard for heavy trucks was introduced and hence a number of new parts was brought in to Scania CV AB. This created a need for modifications in the silencers flow. The flow is highly complex involving several suppliers, call off methods and different models of silencers. The aim for this project was to improve the existing silencers flow. The flow, from supplier to assembling, has therefore been mapped.

Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

This report deals with the performance of a batch flow treatment of landfillleachate compared with a continuous flow system. The parameters in focus were total Kjeldahl nitrogen (TKN), BOD5 and COD. The pilot-scale experiment used eight barrels with a volume of 150 liters. Each barrel was constructed differently concerning its flow, its bed material grain size and its presence of plants or not. Four of the barrels worked in batch mode, thus four in continuous flow mode.

Syftet med föreliggande studie var att undersöka hur ryttare upplever Flow, och vidare även hur ryttare upplever samspelet inom ekipaget vid Flow. Studien inkluderade 10 kvinnliga informanter (M = 18.7, SD = 1.48) med tävlingserfarenhet som sträcker sig från ingen alls till internationell nivå (Hoppning= 4, Dressyr = 3, Fälttävlan = 2, Ingen tävling = 1). En semi-strukturerad intervjuguide utvecklades utifrån Csikszentmihalyi's holistiska perspektiv på de nio dimensionerna av Flow (Jackson & Csikszentmihalyi, 1999), och data analyserades kvalitativt genom en innehållsanalys. Resultatet visade både att ryttares upplevelse av Flow stämmer väl överens med andra idrottsutövares upplevelse (Swann, Keegan, Piggott och Crust, 2012), och bekräftar tidigare tolkningar av att ridsporten skiljer sig från de flesta andra idrotter genom att utfallet till stor del är beroende av interaktionen och samarbetet mellan häst och ryttare (Beauchamp & Whinton, 2005). Vidare visar resultatet även att samspelet mellan häst och ryttare är en viktig och oersättlig del i upplevelsen av Flow..

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

The system tungsten-oxygen has potential of being suitable for decorative coatings since ceramic coatings are often hard and wear resistant, and since modulations in oxygen content or incorporation of small ions could give bright colours. The aim of this report was to investigate the relationship between process parameters and  the properties of the films, with the wear resistance being of special interest.Samples with tungsten to oxygen ratios in the range of 100:0 to 25:75 at% were made using reactive sputter deposition, either with constant gas flow, or gas flow controlled by optical emission of the plasma. The hysteresis of the system, which means that a certain gas flow will cause different pressure and/or target voltage depending on in what way the flow is reached, makes it interesting to control the process where the system makes the steep change from metallic tungsten to ceramic tungsten oxide. This is difficult and thus requires precise control equipment.The samples were analysed using X-ray diffraction, X-ray photoelectron spectroscopy and an empirical wear test suitable for small components like cell phone cover for example, in order to characterize the structure, composition and wear resistance of the coatings. The results could be divided into three groups: (I) tungsten-like, with very low oxygen content; (II) mixed phase and (III) tungsten oxide like, with oxygen content close to 75 at%.

Syftet med denna studie är att undersöka hur elever i en vanlig svensk mellanstadieklassupplever flow i sitt lärande och vilka faktorer som påverkar upplevelsen av flow.För studien valdes en kvalitativ metod i form av enskilda intervjuer. Tre pojkar och treflickor i en klass 4 på mellanstadiet fick berätta vilket deras favoritämne var, och sedanbesvara frågor om hur de upplevde sitt favoritämne och hur de upplevde de övrigaämnena. Frågorna var skapade utifrån de olika faktorerna som påverkar flow enligtMihaly Csíkszentmihályis flowteori (Csíkszentmihályi, 1993).Resultatet av min undersökning visar att eleverna som intervjuades upplever flow iskolan, och då mest i favoritämnet. Det finns även exempel på motsatsen där entusiasmoch flow saknats i skolarbetet. Faktorer som har betydelse för att flow ska uppkomma ärbland annat rätt svårighetsgrad på uppgiften så att utmaningen anpassas efter individen,rätt tid och arbetstakt för genomförandet av uppgiften, möjlighet till medbestämmandeoch inflytande för den som utför uppgiften samt eliminerandet av störmoment underarbetet med uppgiften.Undersökningens resultat visar att flow har betydelse för elevens motivation och iförlängningen sannolikt också för elevens lärande.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

Syftet med denna studie har varit att undersöka relevansen i tre olika teorier som förklarar hur Flow kan upplevas på en arbetsplats. Teorierna är skapade efter forskning från Csikzentmihaly, Hofstede samt Maslow. Undersökningen har skett på två olika arbetsplatser inom två olika yrkesgrenar för att finna om eventuella skillnader mellan dessa två arbetskontext kan påverka upplevelsen av Flow. Det ena företaget kategoriseras som en affärsmiljö och det andra företaget rubriceras som en kontorsmiljö. Tre hypoteser skapades som var för sig testade de tre teoriernas effekt på Flow.

Detta arbete har utförts för att undersöka frågeställningen ?Hur bör ett dataspels tutorial designas för att spelaren ska lära sig samtidigt som den främjar uppkomsten av flow??. För att besvara detta har teorier inom pedagogik, lärande av spel, användbarhet och flow samt mer generella teorier kring spel studerats för att skapa en teoribildning inom området. För att testa detta har ett spel med två olika tutorials skapats. Detta spel har sedan använts för att, med hjälp av två testgrupper, samla data om hur spelare lär sig samt deras flowupplevelse.

Swedish healthcare is in continuous need of cost savings and efficiency improvements in order to meet the increased demand for care. The theories of lean, developed from the industry, are applied more frequently on healthcare systems to increase effectiveness and reduce waiting times in patient processes. However, some processes seem to be more successful in their lean implementation than others. In this thesis, factors influencing flow efficiency in lean healthcare are examined. Through interviews with the top executive board at Capio St Göran's hospital, data is collected in order to analyze reasons for success.

Detta arbete syftar till att undersöka hur Csikszentmihalyis teorier kring optimala upplevelser, eller flow-upplevelser, kan appliceras på praktisk speldesign. I arbetet kombineras Csikszentmihalyis definition av begreppet flow med Jenova Chens riktlinjer för flow-uppmuntrande design i singleplayerspel för att ge underlag för framtagandet av ett brädspel i vilket applicerbarheten hos deras teorier och riktlinjer på multiplayerspel undersökts. För att teorierna och riktlinjerna effektivt skulle kunna undersökas utvecklades det tre olika versioner av brädspelet som alla innehåller olika element som, enligt Csikszentmihaly och Chen, bör alstra flow. Ett flertal spelgrupper fick spela dessa tre versioner och via enkätundersökningar och intervjuer förmedla hur de upplevde de olika versionerna, både som individuella produkter och i jämförelse med varandra. De data som erhålldes från dessa undersökningar indikerade på att nivån av kontroll spelaren har över sin spelsituation spelar en väldigt avgörande roll i hur han eller hon upplever spelaktiviteten i sin helhet..

This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.

This thesis is a feasibility study into how Fresenius Kabi may rationalize their destruction process in regards to cost, recycling, and work environment. The two main objectives are to identify scrap flows and the possibility to improve or replace the equipment that is now carrying out the physical scrapping. The flow has been visualized by a flow chart of the material and communication. A chart of the problem established to visualize where improvements are necessary. Based on the problems proposals are presented on how to improve the flow thru the plant.During analyze of the physical scrapping equipment it was also necessary to take a deeper look at how they are carrying out there work today, how does the procedure look like, working environment and where are the weaknesses.