This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

From the customer?s perspective the only reason for a firm to exist is the value it creates. However, a problem within manufacturing companies is that of the total lead time, only a small part can be considered as value adding. It has further been discovered that when working with improvements businesses often sub-optimizes single processes instead of considering what benefits the entire company. Thus, when improving processes and activities it is important to have knowledge about and understand which factors that affect how the flow can be designed.Several studies have been performed with a wide perspective on Process flows in order to obtain a more resource-efficient and value added flow.

A good flow of information in organizations is one of the key aspects of how we define a well-functioning organization. The information flow could be internal as well as external between actors within as well as outside of the organization. In a logistics organization this flow of information is equally important as in any other kind of organization. In this paper we have explored information flows in logistics organizations by applying, boundary spanning and the mobile-stationary divide perspective. In boundary spanning the main goal is to erase or relocate some of the boundaries within an organization, in our case to make the flow of information internally as well as externally better.

A good flow of information in organizations is one of the key aspects of how we define a well-functioning organization. The information flow could be internal as well as external between actors within as well as outside of the organization. In a logistics organization this flow of information is equally important as in any other kind of organization. In this paper we have explored information flows in logistics organizations by applying, boundary spanning and the mobile-stationary divide perspective. In boundary spanning the main goal is to erase or relocate some of the boundaries within an organization, in our case to make the flow of information internally as well as externally better.

Purpose: We wish to gain a deep knowledge about product development processes in relation to the aspect of time in companies in highly technological and rapidly changing markets. The purpose is to establish how organizations better can employ time as a resource to make the product development process more efficient. Conclusions: Information we gathered from theory and primary data show that information flow, synchronization and time profit when seeing time in three dimensions are factors which should be reflected in the architecture of a product development process. To illustrate our findings, we decided to create a model..

Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.

At Forsmarks Kraftgrupp AB (FKA) forces on pipe systems due to transient flow are frequently calculated as a step to verify their structural integrity. In nuclear industries these forces are often calculated with a one dimensional thermal-hydraulic analysis-code called RELAP5. When calculations regarding more complex geometries are needed, the three dimensional code Fluent is often used. This code is highly time consuming and requires large computational power.This projects aim is to compare calculations of pressure, flow and forces carried out by RELAP5 and Fluent for an arbitrary pipe section during transient flow conditions. This has been accomplished by constructing a simple geometry for which a transient flow is simulated in both programs.

I denna rapport predikteras livslängden, med avseende på utmattning, för en hjullastarskopa. Två av de mest kritiska svetsarna utvärderas enligt IIW:s (International Institute of Welding) rekommendationer genom nominella spänningsmetoden, hot spot-metoden och effective notch-metoden. Beräkningarna utförs med hjälp av finita elementmetoden. Genom att utföra töjningsmätningar på hjullastarskopan i drift erhålls spänningsdiagram. Dessa uppmätta spänningsdiagram analyseras med rain-flow count-metoden.

This master thesis was carried out at ELFA, one of the largest catalogue distributors of electronics in northern Europe. ELFA offers a wide selection of products such as measuring instruments, fuses and screwdrivers. The master thesis handles the possibilities of an increase in the internal flow of products. The background to this problem is ELFA?s acquisition of two new companies, which brought the product range in the warehouse from 55 000 to 80 000 products.

A good flow of information in organizations is one of the key aspects of how we define a well-functioning organization. The information flow could be internal as well as external between actors within as well as outside of the organization. In a logistics organization this flow of information is equally important as in any other kind of organization. In this paper we have explored information flows in logistics organizations by applying, boundary spanning and the mobile-stationary divide perspective. In boundary spanning the main goal is to erase or relocate some of the boundaries within an organization, in our case to make the flow of information internally as well as externally better.

Most companies have a bottleneck in their production, that is a constraining re-source. When the demand is higher than the capacity in the constraining resource it is impossible to produce the demanded output. This problem leads to delayed deliveries, unhappy customers and ultimately to decreased revenue. Bottlenecks therefore has a significant role in production and must be handled thereof.MW Power in Sävsjö, Sweden designs and manufactures water and steam boilers for the customer's unique needs. MW Power invested in a new plasma cutting ma-chine but the machine has not reached the expected capacity.

The present study is embedded in the research field of Personal Information Management (PIM) and its goal is to contribute to this research area by showing information management aspects in untraditional contexts, as in the social networking site Twitter. The aim and purpose of this two year's master thesis was to investigate the beha-viour of librarians within the context of Twitter. The objectives of this thesis focus on the query of the informa-tion management aspect of Twitter, and on the investigation into whether Twitter offers the possibility to reach a state of flow while using it, as well as inquiring into the relationship between Mihaly Csikszentmihalyis flow theory and PIM. The theoretical framework of this thesis is centred upon the flow theory and the conditions that are necessary to reach a state of flow. To fulfill the purpose of this thesis a directed content analysis is applied as an investigative method, where its in-depth research aspects will be applied upon the empirical material, which contains 429 tweets.

Det här arbetet handlar om flow och hur begreppet samverkar med olika aktiviteter i våra liv. Bakgrunden till flow förklaras inledningsvis i kapitlet om teoretisk bakgrund och sätts senare i relation till inre förändring, socialt samspel, fysisk aktivitet, kommunikation, samt pedagogik. Syftet med arbetet är att ge svar på hur flow kan användas i undervisning. Som metod för datainsamling har jag gjort en gruppintervju med fyra lärare aktiva vid Musikhögskolan i Malmö. Gruppintervjun fungerade som ett vardagligt samtal mellan fyra personer och resultatkapitlet är sammanställt i sex rubriker: Introduktion; Personernas uppfattning om flow; Vägar till flow och hinder på vägen; Gruppflow; Flow, kvalitet och kommunikation; samt flow och undervisning.

Background - Swedish trade and industry primarily involves small corporations, including small manufacturing corporations. Currently, most costing models that are used are based on studies accomplished at large corporations. This conveys to the fact that product costing that occurs at small manufacturing corporations is based on all complexities that large corporations bring, which rarely match with small corporations. It occurs that small manufacturing corporations unconsciously rely on incorrect information that has been calculated based on great corporations? product costing.

Mapping a process enables a greater understanding of the work, and is standard to evaluate and improve a process. This thesis is conducted at Test Bed Mechanical Design at Scania in Södertälje. Test Bed Construction is a complex process, characterized by a large amount of creative work, technical challenges and coordination between different people and different organizational functions.The aim of the thesis was to identify the Test Bed Construction Process and to develop a visual model of the workflow that also served as support for the engineers in their daily work. During the mapping process, comparisons were made with previous research in lean product development to identify process improvement.A literature review on process mapping and process visualisation resulted in a method for process mapping. The study showed that research on process visualisation is neither structured nor well defined.