Sök:

Sökresultat:

3162 Uppsatser om Non-chemical control - Sida 17 av 211

Membranbioreaktorteknik- en framtida lösning på Lundåkraverket? : Membrane bioreactors- A future solution at Lundåkra wastewater treatment plant?

Membrane bioreactors (MBR) combined with biological phosphorous treatment (Bio-P) has been investigated if that could be an alternative to the future expansion with conventional active sludge treatment at Lundåkra wastewater treatment plant (WWTP) in the proximity of Landskrona, Sweden.The results showed that the surface demand in the biological treatment will be reduced with 67% with the MBR-alternative compared to a conventional activated sludge process. The nutrient removal in the MBR-solution was decreased or unchanged for nitrogen-, phosphorous- and organic parameters. However, the energy demand will increase with an estimated cost of approximately 1 million SEK annually. Moreover, the extra chemical consumption is estimated to cost 370 000 SEK annually.The disturbances caused by filamentous bacteria such as sludge dispersal could be resolved with MBR-technology because the membranes are not affected by these organisms. The Bio-P process combined with MBR-technology works if the wastewater recirculates from the membranes to an aerobic zone.In the proposal, there will be a new pre-treatment step, for instance hole screens.

Diatermirök- Det perioperativa teamets arbetsmiljö

BackgroundDiathermy is the most commonly used surgical instrument in the surgical area today. Diathermy is used in surgery to cut and coagulate tissue. The use of diathermy releases chemical substances in to the environment in the form of diathermy smoke. Research shows that these chemical substances pose health risks to both staff and patient exposed to the smoke. To protect the interdisciplinary, perioperative team from the smoke, smoke evacuation systems can be used.ObjectiveThe purpose of the study is to highlight the work environment of the perioperative team when working with diathermy smoke.MethodThe study is meant to be implemented as an empirical descriptive sample survey.

Effekten av sex veckors coreträning enligt det förkoreograferade programmet Fokus

Core strength is important in order to be able to do all types of daily activities. One way to exercise ones core muscles is according to the pre- choreographed program Fokus. Previous studies have shown that core training gives better balance and stability in the core and also improved techniques, body awareness and control. Aim: To evaluate the core endurance strength, the balance and the studied individuals self estimated body awareness and control after six weeks of training according the pre- choreographed program Fokus. Methods: A total of 14 people volunteered to participate in the study, six of which completed the study.

Effekten av sex veckors coreträning enligt det förkoreograferade programmet Fokus

Core strength is important in order to be able to do all types of daily activities. One way to exercise ones core muscles is according to the pre- choreographed program Fokus. Previous studies have shown that core training gives better balance and stability in the core and also improved techniques, body awareness and control. Aim: To evaluate the core endurance strength, the balance and the studied individuals self estimated body awareness and control after six weeks of training according the pre- choreographed program Fokus. Methods: A total of 14 people volunteered to participate in the study, six of which completed the study.

Hastighets- och positionsinterface för motorer

The environmental requirements and laws on combustion engine emissions are very tough today andthey will become even more stringent in the future. To achieve these requirements there are highdemands on the control systems for these engines. An improved precision in the measurement of anengine's speed and position gives the electronic control system an even better timing when it comes tofuel injection and ignition. This makes the engine more fuel efficient, reducing the emissions. This thesisis part of a collaborative project between Hoerbiger Control Systems and subsidiaries.

Modern kontra traditionell styrning : - en studie av traditionellt tillverkande företag

Bakgrund: Traditionell styrning har kritiserats av en rad olika författare och en modern verksamhetsstyrning har utvecklats. Vi menar att traditionella tillverkande företag är intressanta ur den aspekten att traditionella ekonomistyrningsmodeller är uppbyggda kring dessa typer av företag. Frågan vi ställer oss är alltså huruvida modern verksamhetsstyrning är ändamålsenlig i traditionella tillverkande företag.Syfte och metod: Syftet med den här uppsatsen är, att beskriva och analysera tillämpningen av traditionella och modernare verksamhetsstyrningsmetoder i traditionella, tillverkande företag. Vår empiri är baserad på sex olika kvalitativa intervjuer på företagen Cloetta Fazer, Milko och Skånemejerier.Resultat: Traditionellt tillverkande företag möter inte samma förutsättningar som tidigare och behöver därför på många plan anpassa sin styrning..

Konstruktion och utveckling av en självbalanserande robot

This project is part of the course MF10YX, introductory mechatronics. The purpose of theproject is to integrate modules from the group members previous specializations into amechatronic system in the form of a self-balancing robot. The prototype ?Charlie? should be ableto race along a 10 - 30 m line. It should be able to start manually and autonomously detect andstop after the finishing line.

Predicerar Work Locus of Control och anställningslängd arbetstillfredsställelse?

Arbetstillfredsställelse är ett viktigt begrepp då människor tillbringar stor del av sitt liv på arbetsplatsen. Det är ett svårdefinierat och komplext begrepp, men kan ses som en individs syn på och värdering av sitt arbete och sin arbetsplats. Locke (1976) ser det som tillstånd och upplevelser och Kaufmann och Kaufmann (2005) som ett samspel mellan bland annat den anställdes tankar, förväntningar och själva arbetet. Det finns aspekter som kan kopplas till hur tillfreds en medarbetare är med sitt arbete och sin arbetsplats. I följande studie belyses förhållandet mellan Work Locus of Control och arbetstillfredsställelse samt anställningslängd och arbetstillfredsställelse.

Frekvensreglering i det nordiska kraftsystemet

Svenska Kraftnät is (together with the other transmission system operators of the Nordic power system) responsible for keeping balance between the generated and demanded power in the Nordic power system. Spontaneous load variations and system disturbances, however, lead to power imbalance followed by frequency variations. The frequency deviations can be limited to an acceptable level by the spinning reserve, mainly by hydro power control. But there are also other system properties which have a great influence on the frequency and system stability. The frequency and voltage dependence of the loads have a direct influence on the power balance.

Effekt på östralcykeln hos ston tillförda GnRH-analogen deslorelin (Ovuplant) :

This article starts with a review of the literature regarding the normal reproductive physiology of the mare, prolonged luteal phase and medical drugs used within reproduction of the horse, with emphasis on Ovuplant®. The purpose of this article was to measure the progesterone level in blood, of mares implanted with deslorelin acetate (Ovuplant®). The study was performed at the Department of Clinical Sciences, SLU, in Uppsala. There were seven mares included in the study. They were divided into two groups, one experimental group (four mares) and one control group (three mares).

Mjukvaruplattform för riggstyrning

Today the competition in the automobile industry is getting all tougher. The technology behind cars becomes more advanced. To get ahead of competitors car companies has to look into new areas of innovation.One important area is vehicle safety. Bigger companies have come so far in vehicle safety that difference between cars more depends on the car type (size) than the technology behind it.There is one area where vehicle safety that still has great opportunities for improvement, which is in active safety. The term active safety states that the car has the ability to identify treats and automatically respond to the treats.

Utveckling av reglersystem till quadrokopter

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

Evaluation of Ectopar for the control of the poultry red mite Dermanyssus gallinae

The poultry red mite, Dermanyssus gallinae, is a common problem in poultry facilities, causing great discomfort for the hens and effecting the production economically. Few efficient acaricides are available and there is a need for new control methods since resistance has become a problem in some cases. The aim of this study was to evaluate the efficiency of the new liquid silica control agent Ectopar, on the poultry red mite. An initial in vitro test of Ectopar and its two components individually was performed, where live mites were sealed in together with filter paper impregnated with one of the three solutions prepared. The survival of the mites was thereafter recorded repeatedly during a period of 120 hours and compared to a control. For the field study, two poultry farms with different housing systems were used, one with furnished cages (farm 1) and one with a single tier floor system (farm 2).

Utlakning av tungmetaller från Skörby deponi

The purpose of this thesis has been to assess whether leaching from one particular Swedishlandfill site, Skörbytippen, is contributing to elevated levels of heavy metals in a ditch runningfrom the landfill site to the lake Mälaren in the communal region of Håbo kommun. Since theditch is stretching approximately five km downstream from the landfill site, in situ observationsand maps with known points of inflow was utilized to determine appropriate test points for thecollection of samples.Soil, water and sediment samples were collected and analyzed for content of organic material, pHand conductivity. Data on plant-available elements and total amounts of heavy metals wasacquired through ICP-analysis.The results show that the Skörby landfill is currently in the methane-forming anaerobedevelopment phase, which indicates that the concentration of free and complex-bound metals inthe leachate water should be low due to chemical binding with other landfill compounds. The pHof the sediment samples was generally one unit higher than the soil samples and some of themeasured data, such as pH and conductivity, show that an environmentally disturbing dischargeof some kind of strongly alkaline chemical(s) has been made from Benders? takpanneindustri inclose proximity to the landfill.

Kvinnors upplevelser av anorexia nervosa : En systematisk litteraturstudie

Background: Anorexia Nervosa (AN) is a complex condition with high mortality. AN has increased within the last fifty years and it?s associated with considerable suffering.Aim: To describe women?s experiences of AN.Method: This study was made as a systematic literature review. Articles were searched in Chinal, PubMed and PsycINFO. Eleven articles were used.

<- Föregående sida 17 Nästa sida ->