Sök:

Sökresultat:

652 Uppsatser om Minimal manual - Sida 19 av 44

Granskning av Solibri Model Checker - En Svenskanpassning : Ja?mfo?relse av tva? egenkontrollsystem

The building industry are currently going through a huge alteration. The introduction of BIM (Building Information Modeling). Which also implements a lot of new ways of solving problems that building modeling can cause. This report is written for Uppsala University in cooperation with Temagruppen in Uppsala. However, it contains a comparison between two different systems that checks building models.

Genomförandet av bemanningsdirektivet 2008/104/EG : En problematisk implementering för Sverige?

AbstractThe use of temporary agency workers has increased significantly during the last decades. Due to considerable differences in the legal status and working conditions of temporary agency workers within the EU, the directive 2008/104/EC on temporary agency work was adopted in 2008. The current directive has a two folded purpose, first and foremost to improve the employment and working conditions for temporary agency workers, by establishing the principle of equal treatment. The second purpose is to create greater acceptance for the temporary work agencies, and also to review and remove any unjustified restrictions or prohibitions against them.There are several different models for labour market regulation represented within the EU. The Swedish and Nordic model has through history relied heavily on regulation via collective agreements, entered into by the social partners, with a minimal amount of state interference and regulation.For Sweden there is a potential problem in the implementation of the directive on temporary agency work, since it follows from case law by the European Court of Justice (ECJ).

Investeringsprocesser i ett divisionaliserat företag : -En fallstudie inom Södra Skogsägarna

I denna uppsats studeras investeringsprocesser i det divisionaliserade företaget Södra Skogsägarna ekonomisk förening. Studiens syfte är att beskriva och förklara företagets investeringsprocesser och i vilken utsträckning dessa processer är standardiserade. I studien analyseras dessa investeringsprocesser utifrån befintlig teori. Studien visar att investeringsprocesser initieras i den operativa verksamheten för att sedan drivas fram i den operativa verksamheten och i ledningen på enhetsnivå. Beslut fattas på alla nivåer i företaget efter investeringars storlek.

Företagsförvärvs inverkan på den kortsiktiga avkastningen : En eventstudie om kursutvecklingen vid offentliggörandet av ett förvärv

Purpose: The main objective of this study is to research whether an announcement of an acquisition generates positive/negative abnormal short-term return towards the buying company?s shareholders. The secondary purpose is to research whether any differences could be due to selected factors: firm size and industry.Method: The study is quantitative in nature where the research aims at the stock price movement around the announcement of an acquisition. The sample size includes 30 companies between the years 2000-2010. The abnormal return is investigated by an Event Study.Conclusion: Our study shows that the publication gives a positive abnormal return in comparison to the respective sector indexes.

Plan för multifunktionella buffertzoner längs Vramsån på Malörten AB: s jordbruksfastigheter

To create multifunctional buffer strips along a watercourse in an economically sustainable way requires consideration of many different factors. In this plan we have selected pollutant reduction as the main purpose of the buffer strip. We have also strived to achieve minimal income loss due to reduced production, increased biological diversity, good game preservation that leads to higher income from hunting, aesthetical satisfaction and possibility to profit from available subsidies. This is done mainly to make landowners/farmers more interested in creating buffer strips along water courses. As sand is the dominant type of soil in the area, the water course is less affected by surface runoff compared to if the soil would be clay or some other finer texture. Game preservation and subsidies have therefore been the main factors when establishing the width of the strip, because these require wider buffer strips in some cases.

Se men inte röra : Röntgen som verktyg i dokumentation av historiska stoppningar.

How can we use modern X-ray technology to raise awareness of the information that is hidden in historic upholstery? The materials and techniques add information to the history object in question and  about a profession that is sparsely documented in our country. The knowledge we have today has largely been obtained by studying damaged upholstery, or by removing the show cover and upholstery, a technique which involves high risk of damaging the upholstery. X-ray technology offers  a non- intrusive way to examine historical upholstery.Through case studies, I examined four artefacts. The artefacts went trough an inititial visual exam before being transported to The National Heritage Board in Visby where they underwent a thorough X-ray exam.

Kvinnans upplevelse från bröstcancerdiagnos till mastektomi - med fokus på coping och självbild : en allmän litteraturstudie

AbstractAim: The aim of this study was to describe which coping strategies women use when they have been diagnosed with breast cancer. In addition, the purpose was to describe how woman?s self-image changes after a mastectomy. Method: A literature review study has been carried out with a descriptive design. The result of the study included 16 articles which were found in the databases: Cinahl, PubMed, PsycInfo and through manual search.

ISO14001:2004 : ett humanekologiskt verktyg?

ISO14001:2004 : A Human Ecological Tool?This is a study by means of litterature analysis and personal experience to find out wheather you could call ISO14001:2004 a Human Ecological tool. The ISO14001 is an environmental management system. I'm approaching the issue from a users' perspective and putting my experience of implementing the ISO 9001 at my work to good use. Though my personal experience is limited to the implementation of the ISO 9001, it is quite relevant to the task since the update of 2004 the ISO14001:2004 is brought closer to the ISO 9001 standard in many ways.

Prestanda och webbramverk

I denna studie underso?ktes det tio vanliga ramverk inom webb branschen, ba?de de mest anva?nda ramverken samt na?gra nya uppstickare som har va?xt mycket de senaste a?ren. Fo?r att skala upp en hemsida till ma?nga anva?ndare a?r det viktigt att strukturen bakom sidan presterar bra, da?rfo?r a?r det viktigt att va?lja ra?tt ramverk. Sa? hur ska en webbutvecklare da? va?lja ramverk fo?r att kunna uppna? en bra prestanda? Det a?r allma?nt ka?nt att anva?ndare la?mnar sidor na?r responstiden o?kar.

Fuktmätningsmetoder under Produktionsskedet: Fältstudie i En Mätmetod

För att möjliggöra användbara fuktmätningar hos byggnadsmaterial i produktion har treviktiga egenskaper hos mätmetoder identifierats: ? Enkla att handha ? Enkla att momentant läsa av resultat utan behov av analys ? Enkla att montera (om så krävs)Fuktstickan BTG uppvisar god uppfyllnad av dessa tre krav på egenskaper men gav docksämre resultat vid laborationstester och fältmätningar. På grund av detta så är den ej en avmetoderna som rekommenderas till produktion, utan föreslås istället för vidare studier.Betong har bedömts vara det, av de undersökta materialen, som står för den störstafuktbelastningen för de övriga byggnadsmaterial som den byggs ihop med. Därför har en,för fältmätningar i produktion, förenklad manual för fuktmätningar medelst testosystemetskapats och föreslås ligga till grund för kompletteringar till NCC:s kunskapsdokument.För isolering så görs bedömningen att fukttillståndet hos den kan uppmätas medelst enluftfuktmätare och för uppmätande av fukttillstånd hos trä, rekommenderas traditionella,elektroniska mätinstrument med tillhörande hammarstift på en förlängningskabel.För övriga byggnadsmaterial har inga metoder funnits tillfredsställande, utifrån de tregrundläggande egenskaperna som identifierats för fuktmätning i produktion..

Datorspel för lekfull och interaktiv teckeninlärning: utvärdering och vidareutveckling av en prototyp

The aim was to evaluate and suggest improvements for the prototype TIVOLI (sign-learning via computer-based playful interaction). The game purposed to give children who need signing as augmentative and alternative communication enhanced signing skills. Three children in need of signs played TIVOLI at home during 4-5 weeks. Data contained parental interviews, Talking Mats interviews, assessment of signing competence before and after the evaluation period and game protocols. One game interaction per child was filmed.

Projektledning i teori och praktik : att kartlägga och effektivisera flödet inom projektering av höga bostadshus i trä

Industriellt byggande i trä och projektledningsmetoder hänger ihop. För att visa på vilket sätt de har ett samband har kunskaper om projektledning och byggteknik applicerats på företaget Martinsons sätt att projektera höga bostadshus i trä. Syftet med examensarbetet är att upprätta ett förslag till en hållbar projektmodell för projekteringsprocessen gällandes höga bostadshus i trä. Genom strukturering och standardisering av projektflödet i ett bostadsprojekt kan detta i framtiden gynna byggandet av höga bostadshus i trä både i Sverige och internationellt. Resultatet visar en flödesstruktur över ett bostadsprojekt, en manual till projektledaren samt en analys över beslutsunderlaget med rekommendationer på åtgärder för att uppnå en effektivare process utifrån både traditionell-och agil projektledningsmetodik.

Continuing Airworthiness Management Exposition : For Priority Aero Maintenance

The economic crisis has affected the airline industry as much as it has affected all other industries in the world. The small airlines and maintenance organisations must find new opportunities and options in order to survive the harsh crisis. Priority Aero Maintenance is now an approved maintenance organisation performing maintenance on aircrafts, engines and components. The company sees economic gains in the future by becoming an approved organisation that follows the European Aviation Safety Agency guidelines (EASA) and meets the requirements outlined in the rules of Part-M.In order for the company to become an approved organization, responsible for continuing airworthiness of aircraft, a handbook should be presented to the local authority. This handbook describes the company?s responsibility for the continuing airworthiness in order for the authorities to get an insight into the company and its work.This thesis resulted in a draft of CAME (Continuing Airworthiness Management Exposition) and this draft has been approved by Priority Aero Maintenance.The CAME will in the future be used by the company as a basis for developing a more detailed manual to be presented to and approved by the Swedish Aviation Authority (Transportstyrelsen)..

EDI ? en lösning även för små och medelstora företag

Electronic Data Interchange (EDI) utvecklades under 1960-talet eftersom det fanns ett behov av att snabba upp överföringen av dokument i samband med transporter. Men det dröjde ända till 1980-talet innan EDI började användas inom de större industrierna. Att använda sig av EDI innebär att affärssystem kan utbyta information direkt, med minimal eller ingen mänsklig inblandning. Genom att använda sig av EDI-teknik inom eller mellan organisationer kan man dra nytta av ett antal fördelar, däribland sänkta kostnader, höjd datakvalitet och höjd konkurrenskraft. Trots dessa fördelar har EDI haft särskilt svårt att få fotfäste hos den stora majoriteten av de mindre och medelstora företagen.

Lastfördelningsberäkning i elnät : Examensarbete utfört i elanläggning vid Tekniska Högskolan vid Linköpings Universitet

Lastflödesberäkningar kan användas för att se om ett nät behöver byggas ut för att tillgodose en ökad belastning, hur mycket reaktiv effekt som behöver tillföras, eller för att se om ett givet nät klarar av bortfall av en ledning. Syftet med denna rapport är att presentera teorierna för lastflödesberäkningar. Dessutom ska en manual till simuleringsprogrammet Power World färdigställas.Ledningens viktigaste förluster är genom: serieinduktans, shuntinduktans och resistans. Reaktiv effekt kan tillföras dels genom seriekondensatorer, för att motverka ledningens spänningsfall; och dels genom shuntkondensatorer för att kompensera för lastens behov av reaktiv effekt. En lindningskopplare ändrar transformatorns omsättning, vilket renderar i att spänningen i överföringsledet ändras.

<- Föregående sida 19 Nästa sida ->