Sök:

Sökresultat:

652 Uppsatser om Minimal manual - Sida 18 av 44

Vinkärlsetiketterna berättar : En textstudie

This paper examines the texts written on shards from wine-jars found at El-Amarna, Tutankhamuns tomb (KV 62) and Deir el-Medina. Information concerning the administration of wine and its production, found in these texts, is examined. Wine was an important element in Egyptian society and a common iconographic motif in tombs at Thebes during New Kingdom.A survey on previous research on the subject is presented. This is followed by analysis of the different reoccurring elements found in the texts. A definition of the standard formulation of the wine jar label texts is given and the minimal level of information needed for the administration of wine production and distribution is identified. The chapter of the analysis deals with the various types of information given in the label texts, such as date, wine classification, and function.

Design av databassystem för testresultat från Tor-systemet

This master?s thesis was performed at PartnerTech AB in Åtvidaberg. It addresses the problem of managing test results obtained from testing electronics manufactured by PartnerTech. PartnerTech has developed a test system, called Tor, which performs tests on manufactured boards and stores the test results in files. The Tor system consists of both hardware and software part, where the software runs on an ordinary PC with MS DOS/Windows 2000.

Användarvänlighet i blötutfodring : enkätstudie för smågrisproducenter

It is possible to affect the feed costs in different ways. By steeping or fermentation the digestibility of the feed is improved for the animals with a natural process in the wet feeding system Steeping means that the feed is soaked some hours before feeding. This process activatesenzymes and improves the digestibility of for example phosphorus in the feed and make it more accessible to the animal. Wet feeding can be fermented or not. Fermentationmeans that the feed has been soaked for a certain length of time so that a biological process is started.

Förbättrad manuell styrning av staplingskran

Detta examensarbete är utfört hos Swisslog under våren 2013. De hade problem med den manuella styrningen av deras pallstaplingskran för höglager, som upplevdes ryckig och svår att kontrollera vid låga hastigheter.Huvudsyftet var att undersöka varför detta fenomen uppstod och hur det kunde lösas med både hård- och mjukvarumässiga metoder. Utöver detta undersöktes hur produktionskostnaden, för delarna av kranen som rör den manuella styrningen, kunde reduceras.Det upplevda fenomenet är känt som biodynamic feedthrough. Det innebär att konstruktionens acceleration matas genom operatörens kropp och skapar en återkoppling till styrdonet, i detta fall en joystick. Operatörens hand ger en oavsiktlig störsignal som gör systemet instabilt som i sin tur skapar en oscillation som ökar i amplitud och är svår eller omöjlig att stoppa.Den föreslagna lösningen är att digitalt lågpassfiltrera styrsignalen från joysticken.

Allmänhetens säkerhet vid dammanläggningar

För att möjliggöra användbara fuktmätningar hos byggnadsmaterial i produktion har treviktiga egenskaper hos mätmetoder identifierats: ? Enkla att handha ? Enkla att momentant läsa av resultat utan behov av analys ? Enkla att montera (om så krävs)Fuktstickan BTG uppvisar god uppfyllnad av dessa tre krav på egenskaper men gav docksämre resultat vid laborationstester och fältmätningar. På grund av detta så är den ej en avmetoderna som rekommenderas till produktion, utan föreslås istället för vidare studier.Betong har bedömts vara det, av de undersökta materialen, som står för den störstafuktbelastningen för de övriga byggnadsmaterial som den byggs ihop med. Därför har en,för fältmätningar i produktion, förenklad manual för fuktmätningar medelst testosystemetskapats och föreslås ligga till grund för kompletteringar till NCC:s kunskapsdokument.För isolering så görs bedömningen att fukttillståndet hos den kan uppmätas medelst enluftfuktmätare och för uppmätande av fukttillstånd hos trä, rekommenderas traditionella,elektroniska mätinstrument med tillhörande hammarstift på en förlängningskabel.För övriga byggnadsmaterial har inga metoder funnits tillfredsställande, utifrån de tregrundläggande egenskaperna som identifierats för fuktmätning i produktion..

Integrering och delaktighet : Grundsärskoleelevers uppfattningar

Det finns en hel del forskat kring integrering, fast de flesta forskare har utgått ifrån lärare, rektorer och lednings syn på integrering. Jag valde därför att göra min undersökning utifrån elevernas sätt att se på integrering. Det övergripande syftet med min studie var att få kunskap om grundsärskoleelevernas syn på integrering samt uppfattningen av delaktighet i grundskolans klasser på högstadiet. Undersökningen har innefattat tre elevintervjuer där jag har satt elevernas perspektiv i fokus. Hur vida de upplever sig delaktiga eller ej är av varierande grad.

Plan för multifunktionella buffertzoner längs Vramsån påMalörten AB : s jordbruksfastigheter

To create multifunctional buffer strips along a watercourse in an economically sustainable way requires consideration of many different factors. In this plan we have selected pollutant reduction as the main purpose of the buffer strip. We have also strived to achieve minimal income loss due to reduced production, increased biological diversity, good game preservation that leads to higher income from hunting, aesthetical satisfaction and possibility to profit from available subsidies. This is done mainly to make landowners/farmers more interested in creating buffer strips along water courses.As sand is the dominant type of soil in the area, the water course is less affected by surface runoff compared to if the soil would be clay or some other finer texture. Game preservation and subsidies have therefore been the main factors when establishing the width of the strip, because these require wider buffer strips in some cases.

A better DREAM? : Utvärdering och utveckling av en metod för analys av olyckor inom biltrafikdomänen.

Denna uppsats är en del av trafiksäkerhetsprojektet FICA (Factors Influencing the Causation of Accidents and Incidents), vars målsättning är att genom en förståelse för förarbeteende kunna utveckla aktiv säkerhetsteknologi för fordon. Inom detta projekt kommer en metod för olycksanalys, DREAM (Driving Reliability and Error Analysis Method), att användas. Den här uppsatsen handlar om att utvärdera och utveckla denna analysmetod. Arbetet med metoden har främst gällt användbarhetsaspekter av DREAM. Även olika kvalitetsaspekter som till exempel replikerbarhet, har undersökts.

Läkemedel som förebygger och behandlar trombos hos hund och katt

Several diseases increase the risk of thrombosis in dogs and cats, often with a fatal outcome. Currently there are no definite treatment guidelines for the use of thrombolytic and thromboprofylactic agents in veterinary medicine. None of these drugs are approved for dogs and cats in Sweden. Medicines aimed for humans have been used tentatively. This literature study is an investigation of what is currently known about the effects and safety of these pharmacological agents when used for dogs and cats.

Säkerhet och viten i genomförandeavtal ? Byggherrens ställande av säkerhet för ekonomiska åtaganden gentemot kommunen vid exploatering

Ett effektivt industriellt bostadsbyggande i trä bygger på kontrollerade och standardiserade processflöden. För att visa på vilket sätt de har ett samband, har grundläggande kunskaper om proceskartläggning och processbaserad verksamhetsutveckling använts. Processen kan sedan effektiviseras och utvecklas för att i framtiden göra det industriella bostadsbyggandet ännu mer framgångsrikt. Vilket kan gynna träbyggandet både i Sverige och internationellt. Syftet med examensarbetet är att kartlägga företaget Plusshus arbetssätt från ide till färdigt hus och sedan upprätta ett förslag på en hållbar standardiserad processmodell.

Förenklad felinformation på trafikinformationsutrustning

This thesis lays the foundation of the future routines of effective error repotring fortraffic devices in the raiway sector.If a device, for example a timetable display, stops working it is vital that the device isfixed as fast as possible so that the travelers dont miss any important information.The methods that are used today are old and not very effective. It can take time forthe repairmen to find the right device or locating the broken component. At the sametime he is supposed to maintain telephone contact with central control throughoutthe whole session.The need for a new, more effective, system is vital to make the whole repair pfocessmore effective and let the repairmen work without having to contact the centralcontrol by phone.I started this work by examining the possibilities of assigning every object with aunique identifier (ID tag) that could be accessed by a manual scan device. The ideawas that the ID tag could holw information about the object and be obtained byscanning the ID and get the information presented on a mobile device.The work also included building a internet application that enabled the reader to seeand change the information on the ID tag.The result was a database that stored information of different objects which could beobtained by scanning the ID tag and presented by a internet application..

Behov av akut datortomografi och medicinska a?tga?rder hos patienter med strokesymptom och/eller medvetandepa?verkan ? Go?r ambulanssjuksko?terskan och medicinla?karen samma bedo?mning?

Postoperativ återhämtning är en viktig del när patienten genomgår ett kirurgiskt ingrepp. Efter operation vårdas patienten för rehabilitering samt för observation och behandling av eventuella anestesiologiska och/eller kirurgiska komplikationer. Som ett resultat av utvecklingen av anestesiologisk och kirurgisk teknik (till exempel minimal invasiv kirurgi och standardisering av operationsmetoder) har den postoperativa vårdtiden på sjukhuset minskat. Genom denna effektivisering så minskar kostnaderna och fler patienter kan opereras inom kortare tid i jämförelse mot tidigare.Författarna till den här studien arbetar på en kirurgavdelning där patienter vårdas som bland annat har genomgått kolorektal kirurgi. Uppföljning av patienternas postoperativa återhämtning på avdelningen sker enligt fasta kliniska rutiner genom till exempel kontroll av kroppstemperatur, blodtryck, andning, smärta och magtarmfunktion.

Höghöjdsanpassning av BvS10 : Konceptstudie för optimering av överladdningssystem

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

Den amerikanska strategiska kulturens påverkan på en militär doktrin : en analys av FM 1

I denna uppsats prövas orsakssambandet mellan USA:s militärstrategiska kultur och dess armédoktrin FM 1 (Field Manual 1). Syftet är att påvisa i vilken grad som den militärstrategiska kulturen påverkat utformningen av doktrinen och om detta element kan sägas utgöra en självklar grund till doktrinens kontext. I uppsatsen förklaras den strategiska kulturens innebörd, bland annat utifrån Colin S. Grays tes. Denna tes utgör sedermera uppsatsens teoriansats.

Erfarenheter av några utfodringssystem till får :

The evaluation of the function of the feeding of sheep herds is suggested to involve the work effort, the fulfilment of the nutrient needs of the sheep and the feed waste. Mechanisation of the feeding can be very simple or include high degrees of mechanisation. Three different farms, representing different levels of mechanisation are presented. Descriptions and analysis of the feeding systems including mechanisation, work effort and estimations of the feed waste are made on each farm. The herd with the most advanced feed mechanisation included a rolling feed band and mix wagon. The other farms were partly or little mechanised including ad lib feeding from big bales and manual distribution of hay and concentrates. The most mechanised farm was able to feed a large herd of sheep at a low work effort and little feed waste. However, the investment in machinery has to be weighed against the improved efficiency.

<- Föregående sida 18 Nästa sida ->