Syfte: Syftet med studien ?r att unders?ka hur tr?nare inom orientering ser p? motivation, samt hur de upplever att de genom sitt tr?narskap kan p?verka sina idrottares motivation. Metod: Studien har en kvalitativ ansats med semistrukturerade intervjuer. Sju tr?nare fr?n olika orienteringsgymnasier i Sverige deltog. Intervjuerna analyserades tematiskt f?r att identifiera ?terkommande teman i tr?narnas uppfattningar. Resultat: Resultatet visar att tr?nare uppfattar motivation som n?got individuellt och f?r?ndringsbart.

SECO Tools manufactures tool inserts for all types of metal cutting machining. (Ti,W)C is a common raw material used in the production. At arrival, the material (Ti,W)C is always analyzed. Titanium has previously been analysed with x-ray fluorescence spectrometry, but as the calibration has previously been performed with two different types of titanium (rutile and metallic titanium), the results has differed. Because of that, this thesis project has been devoted to analyze titanium, to find the best titanium compound for producing standards.The work has been performed using literature studies and many experiments in the laboratories at SECO Tools inFagersta,Sweden.

I detta arbete har underso?kts hur musiker ser pa? nyttan av ackordgeho?r. Genom intervjuer har fra?gor om ackordgeho?r sta?llts fo?r att fa? reda pa? varfo?r, var och na?r de haft anledning att anva?nda sitt ackordgeho?r eller varfo?r de inte beho?vt anva?nda det. I arbetet har ocksa? ett fokus legat pa? att ta reda pa? vart och hur de har la?rt sig.

This report describes a Bachelor thesis work in which a robotised laser welding cell has been modelled and simulated for the purpose of making a presentation movie. The report shows that the work has been concentrated on making the movie from the modelling phase through the recording of the movie and ending up with the editing of the final presentation movie. A pre-study was made prior the Bachelor thesis work. In the pre-study a literature study was conducted about measurement and calibration of a welding cell. Measurement of almost all equipment in the entire cell was also conducted in the pre-study.

I allt fr?n kommuners styrande dokument till pedagogiska forum p? n?tet via kommersiella produkter och en uppsj? av studentuppsatser i universitetens databaser upplever vi att intresset f?r anv?ndning av Alternativ och kompletterande kommunikation, AKK, och d? fr?mst visuellt st?d, har ?kat markant de senaste ?ren. AKK har g?tt fr?n att vara ett kommunikations-verktyg fr?mst riktat till enskilda barn med funktionsvariationer till ett kommunikationsverktyg som numera anv?nds alltmer frekvent, som en del i den tydligg?rande l?rmilj?n, framf?r allt i f?rskolan. Samtidigt upplever vi att det saknas forskning om AKK inom det pedagogiska f?ltet och framf?r allt i relation till f?rskolan.

De kommunikationsfo?ra?ndringar som kommit med den tekniska utvecklingen har fo?r organisationer inneburit en o?kad komplexitet och decentralisering som sta?ller ho?gre krav pa? den enskilde medarbetaren. Det har a?ven fo?ra?ndrat hur medarbetarna tar till sig, fo?rmedlar och bearbetar den information som ges. Fo?rutom att inneha?llet i det som kommuniceras bo?r fo?rega?s av relevans sta?ller det ocksa? krav pa? fo?retagsledningar och enskilda avdelningsansvarigas kommunikationsinsatser.

Bakgrund och problem: Digital transformation ?r ett hett ?mne inom aff?rsv?rlden, med ett ?kande antal f?retag som str?var efter att anpassa sig till digitala teknologier f?r att f?rb?ttra sina aff?rsmodeller och skapa nya v?rdeskapande aktiviteter. Men med digitala transformationen kommer ocks? utmaningar som budgetber?kningar och brist p? teknisk kunskap vilket ofta leder till misslyckade transformationer. St?rre f?retag har ofta mer resurser till att hantera dessa utmaningar j?mf?rt med SMF.

Rapporten sammanfattar projektarbetet inom kursen Sja?lvsta?ndigt arbete, ht 2012 pa? Kungliga Musikho?gskolan i Stockholm. Projektet har ga?tt ut pa? att sa?tta upp ett befintligt musikdramatiskt verk inom genren musikal helt inom ramarna fo?r de resurser som finns att tillga? inom kursen och pa? KMH. Rapporten bo?rjar med en kort beskrivande inledning samt bakgrund till valet av a?mne.

The purpose of this paper was to identify the elements and the alloys that five objects found in Birka consist of and to examine whether there are any significant differences between the presumably imported and domestic objects. The material was analyzed using a scanning electron microscope (SEM) which was equipped with an energy dispersive X-ray spectrometer (EDS) in order to identify the elements that are present and the alloys that the objects are made of. Then the SEM results were compared with the results of previous analyzes that have been performed on finds from Birka in order to investigate how the objects differ in elemental composition and to find out if there are any significant differences between them. The results showed that the objects? content of the elements analyzed varies as the copper alloys the objects are made of.

The sludgebark and to a certain extent the bark were until a decade ago waste products without any economic value that were thrown away. A number of environmental laws and increcing energy prices have improved the prerequisites for increasing the use of these materials. At Seskarö sawmill they burn the sludgebark and a great deal of the bark in the sawmill furnace. The sludgebark has a number of disadvantages compared to bark during burning. The sludgebark is often wet which means the energy net from burning often gets low.

I dagens moderna samha?lle finns syntetiska kemikalier i princip o?verallt. De kan tas upp av ma?nniskor pa? olika sa?tt, till exempel genom inandning, upptag genom huden och genom mat. Barn och unga a?r mer ka?nsliga fo?r kemikalier a?n vuxna, bland annat eftersom hja?rnan, immun- och hormonsystemet inte a?r fa?rdigutvecklade.

Researchers at Karlstad University have developed a method for making paper ion conducting. The reasearchers want to test this technique in various applications and produce products that make use of the ion-conducting paper. Hopefully this will drive the development forward and result in new applications for the ion-conducting paper.This study was to test the possibility of manufacturing a gas sensor of conducting paper along with electrodes of conductive polymers printed on the paper. By comparing the paper sensor with an electrochemical cell in which the electrodes of conductive polymer replaces electrodes of metal and ion-conductive paper replaces the liquid electrolyte in the electrochemical cell, it was hoped that it would be possible to measure the oxidation and reduction reactions that a gas could introduce at the electrodes.It was shown that it is possible to measure a potential difference in the range of 0.3 V to 0.5 V between the electrodes when exposing an electrode to 100% oxygen. The reaction that takes place is relatively slow and the reaction rate is partly due to the distance between the electrodes.Since the sensor can measure oxidation and reduction reactions it is possible that, in further development of a sensor, the sensor can be made ??into a versatile sensor with more applications than gas measurement as there are many more ways to oxidize or reduce the electrodes than by exposure to oxygen.During the study there have been discussions and meetings held with various companies in the sensor industry to be able to specify what the market demands of a sensor made ??of paper and the requirements that must be placed on the sensor for it to be interesting for the companies..

SyfteDenna uppsats syftar till att analysera kundsegmenteringsmetoder fo?r ett mikrofo?retag pa? industriella marknader betingat av att fo?retaget har mycket begra?nsade resurser och kunskap ro?rande denna typ av arbete.Frågeställningar1. Med utga?ngspunkt fra?n sin marknadssituation, hur arbetar R-Produktion med marknadsfo?ring och kundsegmentering och vilka fo?rdelar och nackdelar a?r fo?renliga med detta arbetssa?tt?2. Baserat pa? marknadssituation och interna fo?rutsa?ttningar, vilka teoretiska segmenteringsmodeller a?r ba?st la?mpade fo?r fo?retaget med ha?nsyn till praktisk genomfo?rbarhet, resursanspra?k och fo?rva?ntad homogenitet?3.

Ett varuma?rkesskydd erha?lls genom antingen registrering eller inarbetning. Fo?r en varuma?rkesregistrering av ett ka?nnetecken kra?vs att det innehar sa?rskiljningsfo?rma?ga, antingen ursprunglig eller inarbetad. Det a?r upp till den som ha?vdar att ett ka?nnetecken a?r inarbetat att presentera bevisning som sto?d fo?r sin talan.

Interest in the implementation of AGV-systems (Automated Guided Vehicle) has in recent decades increased. The reason is that it allows companies to perform reliably and secure internal transport while reducing the need of personnel. It is one of todays most advanced and complex material handling system that can independently make their own decisions regarding flow paths and traffic control. An AGV-system consists of transport units carrying cargo from point A to point B, and communicates using a computer.The purpose of this study is to develop a model on how to proceed in order to design an AGV system in heavy industry. The model is tested by a case study of a company in the metal industry to determine if the model works and gives the correct result.