The aim of this report is to discuss computer security in handheld computers and to find out the appropriate security level that must be implemented to be able to use handheld computers within the Swedish healthcare system. Most healthcare centers are using some kind of electronic journals for their patient´s data today, but there are still a number of clinics that are usingthe old paper-system. On a few places in Sweden the use of handheld computers at the clinics has already started, but in the United States the use of handheld computers in the medical area is already widespread and from this we can see a lot of different situations where it is useful and effective to work with handheld computers. The security demands on patient´s journals are high and regulated in both Swedish law and regulations from the National Swedish Board of Health and Welfare. The law does not have any substantial demands, but states that there should be an adequate security level based on the nature of the information and the costs.

The aim of this thesis is to examine user experience and engagements in interactive cinema.A great deal of the research that is conducted today involves creating interactive films, toexplore and examine film structures. In this study, we build on this research by comparingthree different interactive film structures. To carry out our study, we have categorized threedifferent interactive films after three different models to define their narrative structureand interface. To examine the experiences of those structures we have performed anexperiment where we have collected data from the three different sources; interviews,observations and surveys.It is difficult to draw conclusions about how an interactive film should be constructed asdifferent structures apply to different narratives. Based on our research the conclusion canbe made that the combination between the narrative structure, the narrative content, theaesthetics, the implementation of interactivity and how the film?s interface is constructed ismore important than building a specific structure for an interactive film.

Capital structure is without doubt one of the most frequently studied and controversial areas of modern financial theory, and will certainly continue to receive considerable attention from researchers worldwide. There is still no universal explanation of how an optimal capital structure would be designed for maximum appreciation, despite the development of several theories focusing on the subject. Equity and debt are the two main financing options that in combination explain the business's capital structure. The results of several research studies conducted in the subject has many times pointed out that there are specific factors that are directly related to the company's capital structure, and that there are clear sectoral differences in corporate debt. A study of the capital structure is considered important and interesting to implement due to the reasons above and the purpose of this study is to analyze and try to explain the similarities and differences between different industries in terms of how growth, profitability and size affect the debt level.

Rami Kangas: Tidernas Midsommarvaka. En studie av Hugo Alfvéns rapsodi och tre olika inspelningar som historiska källor. [A Midsummervigil of all times. A study of Hugo Alfvén´s rhapsody and three different recordings as historical sources.] Uppsala: Musikvetenskap, 1999. C- uppsats (60 p).This essay has two purposes.

Today the competition in the automobile industry is getting all tougher. The technology behind cars becomes more advanced. To get ahead of competitors car companies has to look into new areas of innovation.One important area is vehicle safety. Bigger companies have come so far in vehicle safety that difference between cars more depends on the car type (size) than the technology behind it.There is one area where vehicle safety that still has great opportunities for improvement, which is in active safety. The term active safety states that the car has the ability to identify treats and automatically respond to the treats.

The use of subscription services directed towards customers has become a common phenomenon in a vast number of different industries. We have noticed a clear trend of new businesses emerging solely offering subscriptions, and existing companies altering sales of their products to become parts of subscriptions. But research has not caught up with this trend yet, especially regarding why it occurs and how it affects existing businesses internally. The purpose of this study is to examine the driving forces for change and examine how existing businesses have to change parts of their business models to offer subscription services. The premise of this study has been Vargo & Luschs (2004) Service Dominant Logic with their foundational premises and Business Model Canvas by Osterwalder et.

Problem areaAlfa Laval is a world leading company in the heat transfers area and have the vision to continue to be that in the future as well. The company has a lot of press lines where the utilization is high and also has started to become old. Prognosis shows that there is an increased demand of heat exchanger in the future. This increased demand is not something that existing lines will manage. To build new lines cost a lot of money and take time so it is essential that new lines are correct from the start and not need to be rebuilt or a lot of time spent to trim it.GoalThe goal is to achieve 100% theoretical utilization of the press (the press shall press the amount of plates it is designed for).

In this study it was investigated if the adoption of a new routine for quality control could improve the precision of the dimension measurement obtained by harvesters. Data was collected from three different harvesters. First, a reference data set was collected before the new procedures had been incorporated, and then when the new methodology was implemented another data set was collected by the harvester operators, allowing the two data set to be compered. The results indicated that following the implementation of the new procedures, the reliability and the precision of the measurements has increased. All harvesters included in the study had improved regarding most of the controlled factors such as standard deviation, systematic difference and hit rate within ± 2 cm for length and ± 4 mm for diameter..

The Airsoft Community always search for realism and optimal performance.When the performance and/or the realism in your AEG1 aren?t enough you turn to modifications toimprove the weapon. But to manufacture such modifications isn?t that easy, hence you turn tocompanies that are specialized in creating such devices.The goal with this project is to create a prototype of a modification called ?Programmable MOSFET?and targets optimization of the electrical components within the AEG. This means that you digitalizethe control of your AEG thus entails new functions and more stability to the system that isn?t possiblewith its mechanical predecessor.A prototype has been manufactured and programmed with functions according to requirementspecificationsthen it was tested on an airsoft-gearbox with rewarding results.

ESAB is a world leader in production of welding consumables and equipment. The company manufactures, among other things, welding electrodes. A roller straightening unit is used in the cutting process to straighten the wire, which the welding electrode consists of, by adjusting some of the rollers during operation. According to ESAB?s standard and the European machinery directives, moving parts of machinery, such as rollers of the roller straightening unit, must be out of the operator?s reach.

IRB 340, Flexpicker is an industrial robot used for sorting, packaging and the handling of details up to two kg. The Flexpicker is a delta robot, meaning that it with three arms controls a triangular plate, swivel, in a work area shaped like a cylinder. Joints using plain bearings connect the arms.The plain bearing in use today consists of a plastic ring which slides against a hard anodized joint ball. Despite the fact that the plastic contain friction-lowering additives, the bearing needs to be lubricated to prevent noise. Because the robot is used in food and drug handling environments, where the demands on hygiene are set very high, the robot is often washed.

The aim of this study is, from a norm-critical approach, to find, investigate and analyse human representation in the visual culture of one preschool in order to understand if the children enrolled are represented or not. The research questions are: In what ways is there imagery of human representations in images and materials designed for play? What skin-colors and origins are dominant in the data collected?We carried out a qualitative study in the form of visual ethnography. This method allowed us to use a combination of different data collection tools such as photography and ethnographic field notes to collect our data. The photographs we took of images and material used for play, was then analysed through semiotic picture analysis.

How does IT-consultants reason in their consulting process regarding the development of a clients IT-based internal recruitment system? The purpose with this paper is to investigate how an IT-consultant is reasoning in a consulting process and investigate whether consultants are using established models and methods in their work. We have chosen to work with a qualitative examination to attain our purpose. In our work gathering the empirical facts we have been working with a case study, an observation and a simulation exercise. The combination of these has made it possible to carry out the paper and produce the most correct data possible. Conclusion: We state that IT-consultants do not use any theory-based methods, they use process methods created by themselves and their company.

Degree project in Logistics, 30 credits, The Business Administration and Economics Programme, Linnaeus University, 4FE05E, Spring 2013Authors: Ida Nilsson & Malin Skacke Tutor: Peter Berling Examiner: Helena ForslundTitle: Increased profit potential by controlling customers? ordering patterns -­? A case study at OatlyBackground:Oatly manufactures and sells oat-­?based products and deliveries are today carried out through an external distributor. The company is going through a re-­?organisation and will in the future be managing stock keeping and planning of deliveries with their own resources. The customers? present ordering frequency and volume differ substantially, leading to unnecessary costs.

This study aims to investigate how consumers perceive variety in grocery stores and further how private brands have affected consumers? perceptions of variety in grocery stores.The study focuses on the perceptions and attitudes towards variety and the impact of private brands on perceived variety. Hence, a qualitative rather than quantitative study has been used. Photo elicitation has been used in both focus groups and in-depth interviews, which have been the empirical data collection of the study. Scientific articles and books have also been used in the process.