Two different methods for measuring biogas production were used, gas meter and gasbags. The gas meters were electronic and counted each time a certain gasvolume passed through them. The gasbags collected the gas that hade passed through the gas meter until a manual measuring could be done. The two different methods gave the same result for a volume at three liters but for a volume around 0,2 liters they did not. Accuracy and precision for the gasbags was more exact than for the gas meters even if the method was difficult with a lot of different elements that could affect the result.

This report is a description of a developed educational simulator over rail vehicles and its components. The simulator is a hardware-based prototype over a door system on rail vehi- cles. System specialists and technicians will use the prototype. The Simulator should give the user a technical demonstration on how components work in a door system. The proto- type consists of motor, switch, relay and sensor.

How does IT-consultants reason in their consulting process regarding the development of a clients IT-based internal recruitment system? The purpose with this paper is to investigate how an IT-consultant is reasoning in a consulting process and investigate whether consultants are using established models and methods in their work. We have chosen to work with a qualitative examination to attain our purpose. In our work gathering the empirical facts we have been working with a case study, an observation and a simulation exercise. The combination of these has made it possible to carry out the paper and produce the most correct data possible.

Vi, Linda Runvall och Satu Parantainen, har gjort vårt examensarbete för företaget Leine & Linde i Strängnäs. De tillverkar pulsgivare som används inom industrin. Examensarbetet bestod av att göra om en befintlig manual och skriva guidelines (riktlinjer) till Leine & Lindes personal.Under vårt examensarbete har vi använt oss av våra kunskaper inom informationsdesign. Rune Pettersson, professor i informationsdesign vid Mälardalens högskola, beskriver ämnet informationsdesign såhär:?In order to satisfy the information needs of the intended receivers information design comprises analysis, planning, presentation and understanding of a message- its content, language and form.

Design, Grafiskt program, Symbol, Hair.

We chose to study the groups for divorced children in Vellinge municipal because there was no evaluation made of these kinds of groups with the involved methods.Vellinge municipal has had groups for children to divorced parents since 2000. During this period of time the total numbers of children in these groups have expanded. As of now, there are two groups.Our goal with this study was to see which way the CAP, Children Are People, manual has been implemented in the every-day work in the group. Several studies have been made about CAP but not in the context of groups for divorced children. We have also examined results in other municipals that have implemented groups for divorced children into their social services.We have interviewed ten children and four social workers.

The global Positioning System (GPS) provides location and time information as long as there are unobstructed lines of sight to four or more GPS satellites. However, when this is not the case the signal may be inaccurate or sometimes even completely blocked. In these situations the Inertial Navigation System (INS) is an appropriate choice for positioning.  An INS has already been proposed in a previous thesis by Erik Andersson and the objective of this thesis is to fuse the GPS with the INS in a proper way. A part of this project is to decide the reliability of the GPS.Three methods for GPS reliability detection have been proposed. One method based on the statistical properties of each of the separate systems, and two methods based on the statistical properties of the residuals between the GPS and INS.

In this qualitative study of students? methods of calculating subtractions, I have used interviews, subtraction exercises and analysis of teaching material. The purpose of my study was to explore which methods students in grade three uses when calculating subtractions. I also wanted to highlight which strategies the students use and their comprehension of the concept of subtraction. In the study, I also highlight the different pedagogical ideas on which the teaching material is based on and the students? choice of methods.  The study shows that the students choose to use the methods?deduct? and ?kind of number? independently.

SammanfattningDet här examensarbetet har gått ut på att undersöka hur en manual kan utformas för att instruera i att skriva klarspråk om teknisk information.Jag har arbetat utifrån principerna läsligt, läsbarhet och läsvärde samt läst studier i hur en skribent kan förenkla en text. Jag har också utfört en textanalys, gruppintervju och användartest för att skapa en manual som kan vara anpassad utifrån målgruppens behov. I mitt arbete har jag använt mig av principer för att skriva klarspråk. Det är att målgruppsanpassa, använda bekanta ord, skriva en logisk meningsbyggnad och att -strukturera texten på rätt sätt. Manualen blev kortfattad för att passa målgruppen. Den innehåller många exempel för att skapa förståelse och läsvärde..

This paper describes the design and implementation of an automated build system for the JAS39A simulator FUS39A at HiQ:s offices in Arboga. The assignment was to automate the process in which modules are built; the simulator is composed of a number of modules which are built manually at the end of each week, this process takes about a day of manual labor. The system can automatically build a module as either a scheduled service or by manual invocation. The system contains functionality for reporting the build results to any given recipient by e-mail. The purpose of the system is to free up the time put into manually building the modules for better suited tasks by automating the build of FUS39A.The assignment was split into two parts, an analysis part where information of the old system was gathered, tools and methods were chosen and the new system was designed.

Usability studies are not a central field of research in library and information science. Although literature in library and information science treats the importance of usable user interfaces quite extensively, the literature does not significantly treat potential problems in measuring usability. The aim of this master thesis is to investigate, through a critical analysis, the methods used when conducting usability studies in library and information science. The critical analysis is based on potential problems in measuring usability identified through a literature review from the field of studies Human-Computer Interaction, the concept of usabilitys original domain. The material which is to be analysed, is chosen from one library and information science journal Journal of the American Society for Information Science and Technology.

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The work was an assignment from Södra Skogsägarna and the aim of the work was to investigate the economical and biological output after mechanical planting with Eco-Planter compared with traditional manual planting. Eco-Planter is a tool for mechanized planting, fixed at the end of the boom on a conventional harvester. The study confirms that manual planting is less expensive under normal conditions. However, the differences between mechanized and manual planting are not that big and with technical development and/or increased labor costs together with an improved work organization the system with Eco-Planter could be competitive. The biological output, e.g. planting result and survival rate, seems to be quite good.

The aim of the study was to look at a particular work group of housing supporters, whomhave implemented two special working methods in their work. The methods have been implemented by two of the housing supporters that also have special education in the methodsSOC (Sense of Coherence) and solution focused brief therapy. The study is based on anethnographic observation and analysis of documents that are used in the implementation. To analyse the information that was given at the observation and in the document I´ve used a theory which illustrates the significance of developing professions so their knowledge become legitimate. I´ve also used a theory that illustrates the importance of implementation and how it´s done at its best.

How does IT-consultants reason in their consulting process regarding the development of a clients IT-based internal recruitment system? The purpose with this paper is to investigate how an IT-consultant is reasoning in a consulting process and investigate whether consultants are using established models and methods in their work. We have chosen to work with a qualitative examination to attain our purpose. In our work gathering the empirical facts we have been working with a case study, an observation and a simulation exercise. The combination of these has made it possible to carry out the paper and produce the most correct data possible. Conclusion: We state that IT-consultants do not use any theory-based methods, they use process methods created by themselves and their company.

The purpose of this thesis has been about processing an already existing folder for a tax funded organization which is also the employer for this mission ? Expectrum. The reason is that both Expectrum themselves and the recievers of the folder are unhappy with the existing material. The critic that has been directed to Expectrum is that the recievers have trouble understanding what Expectrum is and what they do. Based on qualitative methods such as interviews and text analysis I?ve been able to answer my questions for this thesis.