The aim of the study has been to investigate physiotherapists? view on a new method of treatment in physiotherapy. In this case we have studied Whole Body Vibration training as an example of a new method of treatment. Semistructured interviews were performed with five physiotherapists. The study was carried out as a qualitative content analysis study.

n this dissertation a comparison of two evolutionary methods for evolving ANNs for robot control is made. The methods compared are SANE with enforced sub-population and delta-coding, and marker-based encoding. In an attempt to speed up evolution, marker-based encoding is extended with delta-coding. The task selected for comparison is the hunter-prey task. This task requires the robot controller to posess some form of memory as the prey can move out of sensor range.

This master theses deals with different methods for automatic tuning of the existing controller for external axis. Three methods for automatic tuning have been investigated. Two of these are based on the manuell method used today. The third method is based on optimal placement of the dominant poles. Different sensitivity functions are important for this method.

The purpose of this paper is to describe methods to computerize a library and to compare theory with a process in a school library. The case study is based on a school library called Sunnerbogymnasiet which is situated in Ljungby. My questions are;- Which methods are parts of the process to computerize a library?- Which methods are used in the process in Sunnerbogymnasiet?- What does the practical process look like compared to the methods described in theory?In the paper I present the methods in the process according to the studied literature and compare these with a process at Sunnerbogymnasiet. The most significant result is that cooperation between the school library and the community library was the most important reason for the choice of library computer system.

AbstractBuilding Information Model/Modeling/Management (BIM) is a tool that allows for efficient working methods. BIM saves time and money while providing the potential for visualization. This method of working is based on a 3D-model, and then a fourth and fifth dimension are connected. 5D modeling means that a spreadsheet creates cost estimates based on the 3D model. This provides opportunities to carry out calculations in the early stages of the projects. Calculations are currently performed manually and do not contribute to the development that the construction industry requires.

This thesis takes on a broader perspective of the modern age phenomenon we call spam. One of the aims of this thesis is to present and to compare the variety of methods used in the day-to-day fight against spam, as far they have evolved today, but also to present and discuss some alternative methods for suggested future use. The properties of a common e-mail spam are analyzed to show how the components that make up the structure in an e-mail can be used to classify spam. Furthermore I explain the naïve Bayesian classification methods, the signature-based method, the commonly used rule-based method and the challenge and response method and discuss these. The widespread use of blacklists is also explained and a close new variant to blacklisting, Turntide is presented and discussed.

A strong brand can help a company to be easier to recognize and be remembered by their customers. Part of branding is to create a visual appearance which is called a graphic profile and contains information on for instance a logo, colours or typography.The objective of this thesis was to create a graphic profile for Stjørdal Tannhelsesenter that could serve as a base for a brand work in the future. It was important to analyze how the clinic wants to be perceived and how it is perceived today. The methods used to carry out this study were questionnaires, researches and a focus group.The work resulted in the generation of a graphic profile that included a new logo, colours, decorative elements, fonts, templates for stationery, business card / badge, imagery, and examples of some publications.According to the test which was made to examine the results of the project showed that I was successful and that the new design meets all the requests from the previous questionnaires..

Abstract Background Todays guidelines for advanced CPR emphasize chest compressions with good quality and early defibrillation. Prehospital CPR performed by ambulance crew, an automated external defibrillator (AED) is used. The AED analyzes the heart rhythm and the performer is following the advice to chock the heart or not, given by the AED. During on-going CPR there are sequences when no chest compression is performed known as hands-off time. Hands-off time includes the time for the AED to analyze the heart rhythm and the time when advice is given to the crew.

This is a diploma thesis executed as a part of the examination of the educationalprogram Building engineer ? Construction management at Halmstad University. The aim of the thesis is to compare and evaluate conventional open-cut pipe-laying withhorizontal directional drilling. The thesis includes a comparison of the economic,environmental and time-based aspects of both methods and discusses which factorsthat determine the optimal choice of method.The study is mainly based on previous studies regarding the subject and oninterviews with professionals from the industry.A fictional project with five realistic cases of pipe-laying scenarios was compiled,sent to different companies for calculation, evaluated and compared. Our conclusionregarding when it?s suitable to use which method is entirely dependent on thespecific project.

Parenting is increasingly seen as a profession which requires training and support with the purpose of creating improved interaction. A central question appears to be how the concept of interaction is defined. The aim of this study is to examine how training programs, trainers and parents perceive this concept, whether they define it the same way and whether trainers succeed in reaching parents with the message of what it actually is that will improve in the area of interaction. The study uses a phenomenological approach and a qualitative method.The research subject is the parental training program Komet, a manual-based education program for parents. The goal of the program is to offer families training in methods that have strong scientific support in order to reduce conflicts and to improve the relation and interaction between children and parents.One important result of the study is that parents and trainers viewed the concept of interaction from different perspectives.

Systems development methods mirror different organizational perspectives, and not all methods are formalised, but what they have in common is the purpose of structuring and supporting systems development processes. Which method would be the most suitable may be determined by the systems development context at hand, because every systems development context is unique. Information is a valuable asset in today?s organizations, and it needs to be protected against both internal and external security threats. In our essay we aspired to find and present suggestions as to how systems developers can include security in the very design based on formalised systems development methods to create systems that are better prepared to meet the security challenges of today.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

The aim of the study was to look at a particular work group of housing supporters, whomhave implemented two special working methods in their work. The methods have been implemented by two of the housing supporters that also have special education in the methodsSOC (Sense of Coherence) and solution focused brief therapy. The study is based on anethnographic observation and analysis of documents that are used in the implementation. To analyse the information that was given at the observation and in the document I´ve used a theory which illustrates the significance of developing professions so their knowledge become legitimate. I´ve also used a theory that illustrates the importance of implementation and how it´s done at its best.

This study, based on the socio-cultural theory of the book as a mediating tool, examines how four teachers say they work with the reader ABC-klubben. This is done with a focus on how they reason about choosing the level of readers for the pupils and about what compensation, if any, they make for pupils who read the simpler book and therefore miss the more difficult words and expressions. The result shows that all the teachers say that they take the pupils? motivation for and pleasure in reading as an important ground for the decision as to which reader a pupil should use, and that this decision is taken with a focus on the individual. When it comes to compensation for the pupils who read the simpler book, the teachers do not describe consistently focused work on this, but they describe a similar way of working whereby they nevertheless acquaint these pupils with the more difficult book and the harder words and expressions.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.