In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

Today it becomes more and more important to work with continuous improvements to stay ahead of the competitors. Pfizer in Strängsäs started working with continuous improvements in 2010. By the end of 2012, the company?s goal is to reach 24 improvements per employee at the factory.Their project has two main purposes; to examine the need and possibilities for visualization regarding continuous improvements at the production department and to develop a concept for visualisation of the entire factory?s continuous improvements.To attain the information required to examine the needs at the production department, interviews with relevant employees at the department were conducted. Using interviews as a benchmarking instrument was also helpful in getting different points of views.

If Swedish companies are to compete with companies in low-cost countries they have to achieve a more efficient production. The purpose of Total Productivity Maintenance (TPM) is to increase the company's profitability by increasing the productivity. TPM is a method that involves all employees and aims to prevent failures in order to increase the availability of existing equipment.The aim of this paper is to evaluate the implementation process of TPM and give recommendations for the further implementation process. The conclusion and the analysis are based on a case study done at a production department at ABB Cewe-Controls facilities in Nyköping. The case study consists mainly of qualitative data from participation observations, surveys and interviews.Commitment of the management is a key factor in the implementation process of TPM.

Urban forests are important for people to get at break and be able to relax in a stressful world. Several studies show that we feel better through being out in the forest and historically this was the normal environment for us. As a result of population growth and urbanization we tend to spend less time in nature nowadays than before. Due to this development urban forests have become a central role in our society as a place where people can fulfill their needs and interests. The management of the urban forest is therefore important, especially for municipalities that own forest which is supposed to be of benefit to local residents.Falköpings municipality owns approximately 260 hectares of forest in the popular and most visited recreational area along Mösseberg?s southern slope.

Foreign invested SMEs have recently become increasingly interested in China. The enterprises are in this report categorized as second wave companies since they follow the footsteps of previous pioneers, of which mostly were larger companies. The ambitions of the SMEs are either to sell products on the ever expanding Chinese market or to utilize the potential of low cost production for global markets. The existing literature is fragmented and solely based on the experience of larger companies. We believe that SMEs are facing new and different challenges, and thus a new generic theoretical frame work is desirable.

Because society?s demand for quality, efficiency at low cost is constantly increasing, companies are increasingly choosing to invest new methods to achieve these points. Those who manage to find ways to improve their processes are often the companies that have the greatest chance of becoming a winning player in the market. BIM is a new method that can reduce the internal costs while increasing communications between different parties. However there is disagreement about what BIM is and its purpose.

One of the most distinguishing features of contemporary globalisation is production fragmentation, a splitting up of the manufacturing of a good into several different stages. Production fragmentation creates new opportunities through vertical specialization; a country incapable of mastering the entire production process may specialize in the manufacturing of one separate part. The aim of this thesis is to examine to what extent international integration affects a country?s ability to engage in vertical specialization in an industry characterized by production fragmentation. The analysis focuses on the european integration process over the last decade, where countries in eastern Europe with relatively low labour costs have been integrated with more capital abundant western economies.

I en hårt konkurrensutsatt internationell marknad som kretskortstillverkning gäller det att vara effektiv. Därför tog ledningen för Ericsson Katrineholm under år 2005 beslut att Lean Production skulle införas i verksamheten. Den ökade fokuseringen på produktivitet ledde till att flera problem kopplat till ytmonteringslinorna på avdelningen Module Production & Engineering identifierades. Avdelningen fann att ställarbetet mellan olika produkttyper genererade onödigt långa produktionsstopp som i sin tur begränsade avdelningens möjlighet att minska batchstorlekarna. Syftet med examensarbetet har därför varit att reducera ställtiden mellan olika produkttyper vid ytmonteringslinan för volymproduktion. Detta ska i sin tur nås genom att framställa och implementera ett antal förbättringsförslag. Arbetet har i huvudsak varit av kvalitativ art, med kvantitativa inslag som underlag för ABC-klassificeringen samt uppföljning och tolkning av den genomsnittliga ställtidens utveckling under år 2006. Analysen har genomförts i enighet med SMED-metodik där internt och externt ställarbete vid ytmonteringen först kartlagts innan ett antal förslag lagt fram för att förbättra de olika aspekterna av ställarbete.

Findus Sverige AB, referred to asFindus from now on, harvests peas during a period ofaround 50 days during the summer. The harvest generates about 30 000 tonnes of peas which gives around 40 000 pallets to distribute to the warehouses which Findus uses for final storage. Three hours after the peas are picked in the fields, they have to be frozen to keep their good taste and quality. Because of this the pallets are marked with a preliminary label with quality classification of the content. The Findus quality department then has one day to determine the correct quality of each pallet.

The law firm industry has during the last years met new demanding conditions and one tool to handle these new conditions has been to implement a Knowledge Management system. Large investments have been made in these Knowledge Management systems but the implementations have met many challenges from within the organizations.With a multiple study, based on interviews with Knowledge Management Managers included in a Knowledge Management network, this thesis aims to study the challenges with Knowledge Management and the underlying causes. The result, based on McDermott's theories shows challenges within technical, personal, social and management areas where the law firm need to shift a focus from Information to Knowledge Management, create a culture of trust and integration and use the informal powerbase.The causes for these challenges are found in the base of Mintzbergs theories of Professional bureaucracy where the Knowledge Management is affected by strong self-regulated individualist, a divided organizational structure and industry conditions..

Majoriteten av förändringsarbeten misslyckas på sikt. Trots det utgör bevarandet av dessa en liten del av forskningen inom förändringsarbete och baseras på organisatoriskt perspektiv. Ur ett sociologiskt perspektiv ses individen som central i bevarandet av förändringar. Av den anledningen syftar uppsatsen till att undersöka drivkrafter bakom bevarandet ur ett individuellt perspektiv. I besvarandet har vi utgått från teorier som beaktar långsiktighet, vilka har resulterat i nio potentiella drivkrafter som prövats genom en fallstudie på en svensk akutmottagning och deras arbete med ständiga förbättringar (modifiering av Lean).

This report is the result of a thesis work done at the Department of Engineering Sciences, Uppsala University, and includes 15 ECTS points. The work has been performed at Företag A, a company specializing in electronics whose major product has become a sophisticated tool used by authorities across northern Europe. Företag A has initiated a quality management system according to the criteria set by ISO 9001. Following demands from customers, Company A has now decided to also start working towards a certification according to SS-EN ISO 9001:2008, this work is the foundation for the thesis work. The thesis work has been limited to the production process and the aim has been to enable this process to be certified according to ISO 9001:2008. The work has been performed by analyzing the existing quality management system and the requirements for each process included, whereby the gap between the current and the target state has been mapped. Suggestions have then been made on how this gap can be filled, some of these suggestions have also been carried out during the thesis work. The conclusions drawn are that quality management does not have to be complicated, but quickly becomes so when the complexity of the processes increases.

The purpose of this study was to identify the positive and negative aspects of the work and dynamics of a management team and from that recommend how the team can improve. The aim was also to investigate whether there was a gap between how the members of the management team comprehend themselves and how the project, section and team managers comprehend the management team. The management team contains of seven core team members and is the head function of a research and development site in central Sweden. The results are based on interviews with the present members of the management team and three former members, a survey among the project, section and team managers and by participating observation on meetings with the team. The results show that the management team is an overall well-functioning team that with some changes and improvements, especially concerning communication and information, can reach even further.

I dagens konkurrensutsatta värld förväntas företag lansera produkter eller tjänster som upplevsvara bättre än konkurrenternas. Kvalitet kan innefatta så mycket mer än bara produkten.Kunden förväntar sig bland annat att få tjänsten i tid, till konkurrenskraftigt pris och få godservice efter köpet. Detta gäller speciellt e-handelsföretag då det finns sökmotorer såsomPricerunner och Prisjakt som hjälper konsumenter att hitta den billigaste varan.För att företag ska kunna bibehålla lönsamhet är det viktigt att ha låga kostnader och att få felgörs i processerna. Fel leder till ökade kostnader och missnöjda kunder. En vedertagenlösning är standardiserat arbetssätt.