In Sweden, selection for leanness in pigs has been going on for almost a century. This sometimes results in gilts and sows being too lean and consequently in a risk for reduced reproduction and health status. The Swedish recommendation includes that gilts should be mated after seven months of age, after one documented oestrus, at 120-140kg live weight and with a backfat thickness of 16-20mm. Five gilt producing herds were visited and records of age, heart girth (for weight estimation), body condition (visual estimation), backfat thickness and exterior were made. The same records were also taken in four gilt buying herds on newly purchased gilts.

Sitka spruce (Picea sitchensis) is not considered to be a native species to Swedish forests. It´s origin is the pacific coast of Northern America, an area that is dominated by a coastal climate which makes it likely to believe that it would be well suited for growing in the south-west of Sweden. This study aims to investigate the gain in production that can be reached by growing sitka spruce instead of Norway spruce (Picea abies) in the county of Halland. A regression model based on data from forest experiments was produced to explain the gain in production. This model was based on elevation and annual precipitation. The model was then used to create a map layer in arcGIS that shows the gain of volume in comparison to Norway spruce in percent. An analysis was carried out to find what share of the forestland in Halland county that fell into four different classes of production gain.

När organisationer implementerar ett nytt ERP-systemligger deras intresse påkonkurrensfördelar och ekonomiska vinster. Det fokuseras på vilka fördelar systemet kan georganisationeni form av snabbare ledtider, reducerade kostnader, bättre beslutsstöd och resursöversikt. Dessa konkreta fördelar ärävenlättare att hålla koll på och att mäta. Svårigheter finns i att hantera fördelar som systemet kan ge användarna. Implementation av ett nytt, verksamhetsövergripande, ERP-system kan påverka kärnprocesser, arbetsmönster och uppgifter.

Many companies do not register all the stops that occur in a production plant, it often takes longer to report than to fix the problem. If no problems are registered, you cannot trace where the problems arise.This master thesis was performed at AcobiaFLUX and they have noticed an increased demand from their customers to trace problems raised in their processes. The aim of the thesis was to find out how a tool to monitor a process best could be developed. Then the most essential from the theoretical base was developed into a useful tool for operators. For the operators to know if the process utilizes the full capacity of a process, the tool presents a measure of the Overall Equipment Efficiency, OEE.

Drinking water from drilled wells has a high content of iron and other minerals in many places in Sweden. Questions about the association between the quality of drinking water and the health of dairy cows are regulary asked both by advisers and dairy farmers. There are so far not many studies published about the relevance for high iron content in water and dairy cow health and production. Therefore, the aim of this study was to investigate if there is a connection between the iron content in water and the health of dairy cows. Initially a literature study was made about iron and it´s function in ruminants.

This master thesis was carried out at ELFA, one of the largest catalogue distributors of electronics in northern Europe. ELFA offers a wide selection of products such as measuring instruments, fuses and screwdrivers. The master thesis handles the possibilities of an increase in the internal flow of products. The background to this problem is ELFA?s acquisition of two new companies, which brought the product range in the warehouse from 55 000 to 80 000 products.

Detta examensarbete har utförts vid Elitfönster AB i Vetlanda. Elitfönster AB är Sveriges största leverantör av fönster och fönsterdörrar.Syftet med arbetet är att ta fram åtgärdsförslag för att minska ledtiderna, då korta leveranstider blir ett allt viktigare konkurrensmedel. Arbetet innebar en kartläggning av nuvarande produktionsflöde och identifiering av problemområden.Arbetet genomfördes med hjälp av tidsstudier och intervjuer med arbetsledare och personal. Arbetet bygger även en hel del på observationer, iakttagelser och studerande av statistik.I stora drag kan man dra slutsatsen att de långa ledtiderna beror på främst två orsaker;? hyvelbanornas långa ställtider som medför körningar i veckosatser? kvalitetsbrister och bristfälliga kvalitetskontroller samt trästycken som ?försvinner? längs förädlingskedjan.

To be allowed to sell Z-suspended vehicles with dipped beam Xenon or LED lighting, Scania have to develop automatic headlight level control. This master?s thesis aims to be the foundation to that development.The thesis consists of several parts; a market analysis of how competitors to Scania and the general vehicle industry solve this problem; several available principles for detecting the amount of control needed; the construction of a test station for sensors, a control unit and components connected controlled by the control unit; a further theoretical and practical development of one principle ? one rotational sensor connected between the chassis and the back drive axis; a state flow model programmed in Simulink that produces the control signal for the headlight leveling from the sensor input.Lastly the thesis gives some recommendations to the further development and implementation of automatic headlight level control on Scania vehicles..

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

The purpose of this report was to compare Lilluns egg production with other Swedish egg producers based on the flow of nutrients (nitrogen, phosphorus and potassium) in the egg production systems. The main focus in the report was the utilization rate of the forage and the excess of nutrients per kg egg. Additionally, the purpose was to identify the environmental impact from Lilluns egg production and compare the results with other egg producers. The inflow of nutrients associated with forage and poultry was compared with the nutrients that were exported from the production. All of the egg producers in this study had an excess of nutrients.

Detta examensarbete handlar ?Verklighetstrogen Effektskomposition?. Målet med arbetet är att undersöka och utnyttja alla de olika aspekterna som gör att en film med specialeffekter känns så verklighetstrogen som möjligt. Arbetet handlar om de olika delarna i en filmproduktionsfas så som pre-production,production och post-production. Filmen som skapas är en specialeffektsbaserad hemmavideo som har som syfte att vara så chockande som möjligt i förhållande till vad man förväntar sig när man börjar kolla.

 This study was conducted in autumn 2008 on the Company AB, which is currently in a growth phase. The company manufactures hydraulic systems for the heavy vehicle industry and has annual sales of approximately 250 MSEK with 165 employees.The rapid growth and unchanged planning is the starting point for this report. It all began in 2005 when the company received an unusually large order. During this period, the first priority was to satisfy customers and all other focus was disregarded. This has primarily resulted in a messy production and long throughput times.

Sustainable beef and milk consumption. The consumption of beef and dairy products in Sweden is high. A lot of greenhouse gases are emitted from the production of these products. The production of beef in Sweden has decreased but the import has increased. The number of dairy cows has decreased while beef-production with suckler-cows has increased in Sweden.

This thesis is a feasibility study into how Fresenius Kabi may rationalize their destruction process in regards to cost, recycling, and work environment. The two main objectives are to identify scrap flows and the possibility to improve or replace the equipment that is now carrying out the physical scrapping. The flow has been visualized by a flow chart of the material and communication. A chart of the problem established to visualize where improvements are necessary. Based on the problems proposals are presented on how to improve the flow thru the plant.During analyze of the physical scrapping equipment it was also necessary to take a deeper look at how they are carrying out there work today, how does the procedure look like, working environment and where are the weaknesses.

Quality was earlier only an issue for the company?s quality departments but today is the entire organization involved in quality- and improvements work. With the customers in focus, both external and internal, quality and improvement work should be integrated in the daily activities. The management shall state goals and visions together with a policy. Through participation the correct requirements for a successful work are created.With SPC, statistics process control, there is an opportunity to perceive variations in the process and with the correct tools make it stable.