This report was performed in order to evaluate a new technological measure and focuses generally on a heat pump system to a HWC-washing machine. The client is Asko Appliances AB, a company well known for its environmentally friendly products. The goal of this study was to improve the energy efficiency of a washing machine by combining a heat pump device to the heater of the wash water, in order to reduce the energy consumed for heating the water. Besides reducing the energy consumption in heating the water, the washing machine was required to meet low noise and short operating time specifications. For that purpose, nine trials in three test series have been carried out.

Ditch cleaning is increasingly important in Swedish forestry. This study compare different concepts concerning machinery, namely two general-purpose excavators of different sizes, 8 tonnes and 15 tonnes, versus a dedicated machine constructed solely to deal with ditch-cleaning. The machines were tested on rough as well as on gentle terrain and on open terrain as well as in young stands in connection with thinning. The conclusions were that the excavators are more versatile and have greater capacity than the dedicated machine, while the latter excels in quality of work. Interestingly, there was no significant difference in performance between the both excavators..

This study was conducted on a property with a thinning machine team. The purpose was to investigate in which machine, the harvester or the forwarder, that caused most damage to the trees in six different stands. Different factors, related to the damage frequency in the stands, were checked out. For example: basal area per hectare, thinning strength, tree diameter and the rate of production. The harvester drivers were also interviewed about how, when and why stem damages occur and how to minimize them. The study stated that 4.3 percent of the trees were damaged. Out of these 88 percent was caused by the harvester and the rest, 12 percent, by the forwarder..

The Purpose of this study was to examine what knowledge and which attitudes there are about environmental friendly food in the society. To do so an essay were constructed and distributed to five different working places. Altogether there were 50 essays distributed and 43 were returned. The main result; the respondents think that it is important for people to learn how to consume food in a more environmentally friendly way. The majority of the respondents recognized the eco-label KRAV but the European eco-label and Demeter were not recognized in a less extent.

There is a tough competition in food-stores these days. Storeowners have been forced to try something new to attract customers. One way to accomplish that is to add private labels to the assortment. There are several benefits with these labels; its higher margins for this type of brand and the brand can also strengthen the stores image in the customers mind. When private labels first entered the market, the customer had a relatively low attitude towards the brands.

I made this examination essay to investigate the possibilities and problems with machinery import. The rules intend to loaders and agriculture machines are still pretty flexible. It is today rather simple to make a registration or inspect those machines. There are still some practical problems to be aware of. It is very important to have the right contacts abroad, it is not always that you have time or moment to inspect the machines before purchase. In that case you have to trust your contact or partner about condition, equipment or working hours of the machine. Another important thing is payment before delivery: There is a huge risk that you do not get the machines that you paid for. If problems come up, you need to know the laws, your rights and your duties. A Swedish company does not pay any value-added taxes when it buys from another member of the European union. On the other hand must the machine be sold included value-added tax, if the buyer is a Swedish company.

The purpose of this study is to give a picture of the current status for the recruitment to forest machine operator educations in Sweden, how many the educators are and the outcome of this activity. The three at present different types of education are upper secondary school, polytechnic school and vocational school. The method used for the survey is telephone interviews, pre-broadcast issues were discussed and the responses were recorded. The results are then compiled and presented in linear form. The conclusions one can draw is that education is desirable and important. To get young people interested in forest machine operator education it is very important that the forest industry continues to develop attractive employment..

Wood for commercial use is harvested from forests using forest machines like harvesters which folds, branches and cuts trees and forwarders which transports logs to a landing area for further transport to a processing facility. Future forest machines have to be much gentler to the machine operators and forest soil than today's machines. Hence new machine solutions must be developed and tested. A practical way is to develop a physical scale model which can be used as a test-bed to incorporate different types of solutions for suspensions, cabin damping, tires and tracks, crane and overall architecture. The aim of this project was to develop such a 1:5 scale model of a forest machine, named as ?Skogbil.A scaling strategy was employed to arrive at important scale dimensions and specifications ofSkogbil which would be comparable to the full scale model.

This report deals with an exam report written by Olle Hjalmarsson and Thomas Likar, students at Högskolan i Halmstad. The project was carried out for Haldex Traction AB in Landskrona whose business consist of manufacturing automatic all wheel drive systems (AWD-system). These systems consist of a plate clutch which activates all four wheels of a 4-wheel driven vehicle. An important component in these clutches is the accumulator which basically consists of a piston under the load of a spring which creates an oil pressure with the help of an electric motor used for actuating the clutch.At Haldex difficulties has been experienced regarding the assembly of the accumulator parts due to the small tolerances between the piston and the hole of the accumulator in the cast aluminium housing. Attempts have been made to assemble the parts in existing robot cells.

Our Bachelor´s Thesis has been performed in co-operation with Bors Automation & Tool AB.Our task was to develop a servomotor powered tube cutting-machine with initial point fromtoday's hydraulic driven tube cutting machine Bors HYD 23. The purpose with the newconstruction was to achieve a more power-efficient tube cutting machine which could lowerthe power consumption, and also meet the market continued growing demand forenvironmental-conscious production.Bors Automation & Tool gave us relatively free hands in order to enable new thinking ideaswithout following their traditional constructional solutions.Our solution resulted in a construction based on a power source existing of a servomotordrivenrollerscrew, witch provides a more rational use of energy compared with the currentmethod.Bors Automation & Tool AB has decided to fabricate a prototype of Bors E 23 during theautumn of 2007, which they are planning to revile at the Tube 2008 exhibition in Düsseldorf,Germany.NOTE:Due to an agreement signed by the authors in the beginning of this project, no appendix is published at this time.If you want to wiew these documents, please contact the authors..

This thesis has been carried out onbehalf of Lindborg & Sons in Örsundsbroand is a concluding part of the Bachelorof Science program in ConstructionEngineering at Uppsala University. Theaim of the project is to make a plea fora database of good examples of themachine room types using Revit drawingprogram, and work out a correspondingworksheet .At the start of the process it becameapparent that there were somedifficulties in using Revit to creatingmachine room types of the variety whichthe company builds. For modelling ofoblique, curved and irregular lines, Ihad to use my AutoCAD Architecture andthen import them into Revit.The creation of calculus in Excel wastime consuming. On the other hand, it isa one-time work to create the template.The advantage of Excel is that there isno need for a re-calculation at the costof various types of machine hall. Allthat is needed is to replace the variousparameters.

When a company in the manufactory industry makes costly investments, it's important that these are used as much as possible. The company in this case claims that their invested robot cell, with CNC machine isn't used enough. The questions here are: How can we improve the use of the robot cell? Which products are appropriate for the production in the robot cell? As a method to come to a conclusion, an analysis has been made over the manufactured products. And also interviews with machine operators and the production management.

In this study environmental work in the Swedish hotel chain "Scandic" is investigated. Earlier studies point out sustainability and different environmental certificate programs as essential for the housing sector to contribute to sustainable tourism. The purpose and willingness to fulfill such a mission has been investigated by interviewing central actors in the hotel chain. The result shows that there is a desire to be part of environmental certificate programs mainly for the reason to be part of the system and not for the benefit of nature. Sustainable development is understood as being environmentally friendly. Different solutions to adapt and being more environmentally friendly is discussed.

The Department of Forest Products and Management, Swedish University of Agricultural Sciences has received means from Vinnova for a preliminary study of the organisation of logging work of today and how a better logging organisation should be brought about. This thesis reports results from qualitative interviews with nine forest machine contractors regarding the situation of their companies. The interviews have been analysed with respect to the genesis of the companies, which tasks they perform or that they could consider perform-ing, business relationships of the companies, relationships between the different partners of the companies, and the state of competition experienced by the contractors. The companies have developed either from the contractor previously being machine operator employee or from that the contractor in making has owned a machine and needed work. Their primary business is mechanised logging.

A high quality is highly requested in today?s thinnings, since these are the base for continued value development of the forests. Thinning quality often means a minimization of damages on soil, stems and roots during the cutting. One way to reach a high quality is to set up goals that will be followed up after the cutting is made. Self-checking gives information of the machine drivers work and guarantees the customers a good quality of work.