This Master of Science thesis is conducted at the faculty Integrated Product Development at theRoyal Institute of Technology and in cooperation with EssNet Interactive AB, both situated inStockholm. In the report the final results and the road to get there is described as well as thedesign process and how the process is used to obtain the goal of this thesis.The author of this thesis has developed the design and the function of an interactive videoterminal (IVT) and by using semantics created an encouraging gaming design. The projectspurpose was to change the anonymous withheld shape and produce an experience of gamingmachine that has been absent. The work was aimed to answer the question: How does oneproceed to develop the IVT and by using semantics creating an understanding of gamingmachine?In general the author wants to show that small changes, with the help of design and its signals,can completely change the overall picture of a product.

Denna rapport tar en titt på phishing-problemet, något som många har råkat ut för med bland annat de falska Nordea eller eBay mejl som på senaste tiden har dykt upp i våra inkorgar, och ett eventuellt sätt att minska phishingens effekt. Fokus i rapporten ligger på klassificering av mejl och den huvudsakliga frågeställningen är: ?Är det, med hög träffsäkerhet, möjligt att med hjälp av ett klassificeringsverktyg sortera ut mejl som har med phishing att göra från övrig skräppost.? Det visade sig svårare än väntat att hitta phishing mejl att använda i klassificeringen. I de klassificeringar som genomfördes visade det sig att både metoden Naive Bayes och med Support Vector Machine kan hitta upp till 100 % av phishing mejlen. Rapporten pressenterar arbetsgången, teori om phishing och resultaten efter genomförda klassificeringstest..

Machine-to-machine (M2M) communication is a phase in the digital revolution connecting computing devices with each other bringing along new business opportunities for companies. Although being a fast growing field it has not been researched to any greater extent, particularly not within the academical literature. Consequently, information on how M2M can affect organisations seems strongly needed. This thesis uses three perspectives, derived from already recognised business benefits of M2M, as an aid to select proper theoretical tools to investigate the phenomenon. The purpose of this thesis is to gain knowledge of how an M2M adoption affects a firm?s organisation, customer offerings and customer relations.

The purpose of this Master's thesis is to find possible explanations of variation in light scattering in a fine paper. Samples were collected from each second tambour during a time period of two weeks from a paper machine at MoDo Paper, Husum. Two data sets, consisting of 20 and 95 observations, were selected for extensive analysises of tensile and structual properties. The data was evaluated with multivariate data techniques using the programs Simca and Extract. The results of PCA- and PLS- analysises pointed out 3 of 52 variables as important for the variations in light scattering.

Theoretically, when an organization grows large it has to formalize its structure and exercise control by more regulations. The negative side effect might in turn be demotivated employees (machine bureaucracy). However, practice seems to contradict theory. Therefore, we decided to investigate how a large company, in this case Microsoft, succeeds in creating motivation despite some machine bureaucratic tendencies. The essential findings are that the employees feel motivated by the fact that they are allowed freedom with responsibility.

Forest streams and the associated riparian zones are sensitive to disturbances and changes that occur within these riparian areas. Particularly sensitive are small streams of low order, which will have large impacts down-stream. The disturbances that occur in the riparian zones are reflected quickly in the stream. Driving with forestry machines in the riparian zone will have detrimental effects to the soil and water. Driving the machines will lead to changes in the mineral soil composition, resulting in the reduction of porosity, less infiltration, compaction, and an increased bulk density.

Modern forestry requires a high degree of machine traffic for clear felling and scarification operations. The machines most frequently used are big and the traffic often results in tracks on the forest ground. There are many small streams running through a forest, in connection to logging operations, machines might cross these frequently. These crossings could result in the erosion of fine particulate inorganic matter, which ends up in the stream. The aim of this thesis was to give a general description of small forest streams of order-one in the county of Värmland and to determine the frequency of machine tracks in small streams.

One of the most important components of a harvester is the crane. Most harvester cranes are only possible to pivot (or horizontally rotate) at the crane pillar. Cranab in Vindeln, Sweden, has developed a new type of harvester crane which has an extra pivot point on the outer boom. This makes it possible to reach around residual trees, easing thinning work in dense stands. The aim of the study was to analyze if the use of a pivoting outer boom (POB) crane gave an increase in thinning production and if there were any differences in time consumption between the work elements for the POB crane and a conventional crane. A Valmet 911.3 equipped with a POB crane was used in the study.

Our Bachelor?s Thesies has been performed in co-operation with Cellplast Direkt AB inLaholm. Our task was to develop a construction that cuts gussets to ceiling disposition as isused to isolation.Our goal with our construction was to increase the degree of automation so that theproductivity increased and also meet the market which is getting tougher and tougher due tothe future business cycle.Cellplast Direkt gave us free hands in order to enable new ideas. A pair different principleproposal was developed and prepared to a final structure.The Bachelor?s Thesies resulted in one PLC - governed machine with three engines that runthree different moves, wich does that the degree of automation increases and the risk forerrors decreases.We have developed a complete production bases to Cellplast Direkt and our hope is that thecompany comes to produce the machine in the future..

To get the maximal output of your exercise in gym machines, there are different factorsto be considered. For example the strength of the muscle varies dependent on the positionof the muscles. To get the best results of the exercise the load has to reduce and increaseat specific positions.This study was made in cooperation with Caretaker Scandinavia AB, a company forsales, marketing and development in health care. They are general agent for Nordic Gymwho works with manufacturing of equipment and machines for gym and fitness.The aim of this study was to generate a method of measurement to evaluate and controlthe biomechanics of Nordic Gym´s workout equipment. A protocol for an ergonomicanalysis on the equipment has also been elaborated.One of the methods to measure the biomechanics was to measure the torque through thewhole movement.

In this study environmental work in the Swedish hotel chain "Scandic" is investigated. Earlier studies point out sustainability and different environmental certificate programs as essential for the housing sector to contribute to sustainable tourism. The purpose and willingness to fulfill such a mission has been investigated by interviewing central actors in the hotel chain. The result shows that there is a desire to be part of environmental certificate programs mainly for the reason to be part of the system and not for the benefit of nature. Sustainable development is understood as being environmentally friendly. Different solutions to adapt and being more environmentally friendly is discussed.

The traditional view of maintenance is machine-based, where acute maintenance tasks are highly valued. Preventive maintenance is viewed as secondary and less desirable to work with. The more modern view is to regard maintenance as a process. The machine-driven tasks are still necessary but are viewed as a part of the big picture.The purpose of this study is to examine how to high light general difficulties concerning maintenance management to aid organizations to reflecting upon their own situation. The study is based upon a pilot study initiated by ProcessIT concerning relevant key figures in maintenance.

In the electronic industrials, power control of AC motors is commonly used. For example power control of a washing machine motor, a vacuum cleaner motor or a coffee machine motor. The company Rejlers Ingenjörer AB has many projects where power control of AC motors is included. A prototype card for this task can save time and money for the company in the future and this is the reason for this thesis.The motors are power controlled by a TRIAC and control of the trigging pulses to the TRIAC. This card is modularly built and can easily be adapted for future projects where the power control of AC motors are included.The prototype card can be used as a subsystem in a larger electronics projects or as it is in lab environment for testing and evaluating new motors..

Costs of maintenance on combines are a subject of interest thus it constitute a large investment and cost for the individual farmer. Therefore it is important to have up to date knowledge and the right facts to be able to do reliable calculations on one of the largest investments for a farmer. The aim of this study was to compare costs of maintenance on combine/threshingmachine with the computer program for advising environmental issues in agriculture, STANK. Interviews took place and data were collected by handing out questionnaires to 20 farmers. A similar study conducted by Neuman (2003) investigated costs of maintenance and compared these with STANK. The results of this study have also been compared and examined related to data from SLA - Skogs och Lantarbetsgivarförbundet. The result shows that 18 out of 20 combines were given a higher cost of maintenance when using STANK compared to the numbers in this study.

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.