The scarcity of qualified forest machine operators as well as the increased competition for competent machine operators among others from the mining industry in Norrland, were the reasons to investigate what attracts and what deters active and potential forest machine operators to the occupation. An interview study was conducted among four groups with four persons in each group. The groups were students in year 1 and 3 respectively at a forestry school at upper secondary school level as well as employees of a forest company and employees of contractors. The majority of all respondents were of the opinion that their interests in machines had been important for the choice of occupation. But for the active machine operators both the interest in the forest and their interest for machines have had importance for choosing this occupation.

The awareness regarding environmental issues is increasing and as a result a large number of products are eco-labeled. This enables the consumers to make enlightened environmental decisions when purchasing products. Eco-labeling is no longer for products only, but also for services like hotels. It?s difficult to determine what it actually means to eco-label a hotel and what kind of benefits it includes.

Most companies have a bottleneck in their production, that is a constraining re-source. When the demand is higher than the capacity in the constraining resource it is impossible to produce the demanded output. This problem leads to delayed deliveries, unhappy customers and ultimately to decreased revenue. Bottlenecks therefore has a significant role in production and must be handled thereof.MW Power in Sävsjö, Sweden designs and manufactures water and steam boilers for the customer's unique needs. MW Power invested in a new plasma cutting ma-chine but the machine has not reached the expected capacity.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

Metso Paper offers a front-running range of solutions and services for the pulp and paper industry. At the baling unit, design solutions are developed for manufacturing and handling of pulp bales. The machines are continuously developed to satisfy customer needs. One big step in the development of the baling line was to remove hydraulics from the machines and replace it with electrical motors and pneumatics. This was not done on the folding machine which is still driven by mainly hydraulics.

This paper describes the process of building a machine translation lexicon for use in the train and transport domain with the machine translation system MATS. The lexicon will consist of a Swedish part, an English part and links between them and is derived from a Tradostranslation memory which is split into a training(90%) part and a testing(10%) part. The task is carried out mainly by using existing word linking software and recycling previous machine translation lexicons from other domains. In order to do this, a method is developed where focus lies on automation by means of both existing and self developed software, in combination with manual interaction. The domain specific lexicon is then extended with a domain neutral core lexicon and a less domain neutral general lexicon.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

Lars Höglund AB is one of Scandinavia?s most qualified manufacturers of sheet metal products and provides custom designed products of very detailed precision. One of the main methods of manufacturing is laser cutting. When Lars Höglund AB signed up a new customer, with high demands in tolerances for the products, Lars Höglund AB thought it would be necessary to know the capability of the laser cutting machine. Also the process of how to retrieve this capability was interesting. The capability will be researched for the following elements: Cutting right angles in squares with a corner radius of 1 mmCutting corners which are not right angleCutting of circles with constant radius Measurements were made on 150 pieces of sheet metal details, which had been cut out by the machine.  The data from the measurements where later used to study the capability.

We are getting smarter. Our knowledge of the world around us is increasing rapidly and our population spend a big portion of their time in school studying it. But art and craft are moving out to give room for more theoretical subjects. Today many of us can not even fix a torn shirt without help. We buy new ones, they are cheap enough.

The retailing industry has an extremely high density of brands. In order to differentiate its offer, both retailers and suppliers, are constantly forced to come up with new ways to launch their products. A collaborative strategy between two brands is called co-branding, which means that both the private label and the supplier's brand are displayed on the new product packaging. Several studies have shown that a co-branding strategy is successful, but many operators are still reluctant to use co-branding in fear of long-term losses due to potentially damaged business relations. The objective of this study is to explain how the product- and brand related value for customers, retailers and suppliers is affected by co-branding between private labels and national brands.

Costs of maintenance on agriculture machines is something that many farmers has a low knowledge of, it can depend on low interest or that the farmer don?t have enough time. To make it easier for the farmers they can use many computer programs which are available on the market. In this program they can calculate their costs of maintaince on their agriculture machines, for example STANK and JTI machine calculation program. Most of this program is using Svensson (1987) costs model whish was made in Sweden in the middle of 80 decade in a large study.

This report shows methods and workflow when exploring the potential to change Outotecs HCD Silver Electrolysis machine to a module type. It?s done as an attempt to lower the workshop and installation costs and to give customer a more accurate prize directly. To do this a concept was produced which was set to a stress test. Additional objectives were to investigate freight and installation procedures, pneumatic connections and to calculate the difference in cost.Once the concept, a reinforced type of the original frame, was chosen stress tests in computer simulations were made and appropriate alterations were made.

The purpose with this bachelor thesis is to identify risks and insufficiencies concerning the production at WilloMaskin AB. The project is limited to only 4 machines, where theories as ?OEE? (overall equipment efficacy) should be illuminated and analyzed. The theory of ?Single Minute Exchange of Die? is also presented.The method used in this project is mostly based on qualitative studies but also quantitative studies are presented.

The purpose of warning labels used by governments is to decrease consumption. In Sweden, the mandatory warning labels are designed according to statutory guidelines, and not according to research on attention-grabbing graphic elements. This results in a belief that the attention toward the warning labels is poor. An extensive experiment underlies this study, which has the purpose of providing insights to the effects that warnings, warning design, and warning content has on attention, attitudes and behavior in print ads. The study shows that, even though the standard design and content has lost much of its potential to communicate the warning, it gains more attention compared to a warning label with new design and content.

This study has the purpose of looking at the current and future position of recordlabels from a context involving the technological developments, while theopportunities for the artists are changing. As the actors inside them music industryfind themselves in an ever changing climate where traditional supply chains arethreatened by new technology, the record labels need to change the way they workin order to maintain their existence in the music industry. The study has beenconducted by interviewing a number of people involved in the music industry, byusing a qualitative method approach. The conclusion of the study shows that thetraditional way of doing business by treating music as a product that makes revenueis gone. Instead the labels have to take on new roles formerly run by third parties inorder to survive and be profitable, especially since artists can now in control ofactivities that used to be controlled by the record label..