This report that is written in cooperation with Peab Sverige AB, studies the information and knowledge management from the production support to the production management. The conclusion of this report is that to have a good and functional information and knowledge management it is necessary that the company has a good way of regain and handling experiences from its projects. The way to do this is to develop the managing system on the production management?s terms. It is also critical to find an easy way for the production management to use the system..

This essay in historical archaeology deals with cultural-historical values of buildings and inthis case the old train- and ferrystation in Helsingborg. The building has from the day of itsopening in 1898 been exposed to threats of demolition since its original purpose was as atemporary building with intension of being replaced within a couple of years. After havingseen two World Wars, eventhough Sweden never participated, and the ferrytraffic with its upsand downs the station was an important part of Helsingborg. All the ferrytraffic over the straitto Denmark was handeled by the old train- and ferrystation untill 1955, when a competativeferrycompany was built close to the old station. After a hundred years of service the oldstation was closed down when a new station was built i Helsingborg in 1991 with theintension of gathering all travelers in one building.

The aim of this Master?s thesis is to study the relations between internal information and the principal business objectives in a knowledge organization. The questions are: how does the organization behave to its internal information resources, how is the information management related to the principal objectives and strategies, what information policy does the organization develop, and how is the management experienced by the employees. The purpose was to study the supply and management of information designed for internal use and the study was carried out with qualitative, semi-structured interviews to get a picture of the internal information management. The informants were mostly key persons with deep knowledge of internal information.

The purpose of this study was to describe how journalists do research for their articles and whether there is a need to create a knowledge bank of the material that journalists use for writing these articles. I also looked at how knowledge management could be used at a daily newspaper to add value to the information used by the journalists. The thesis is based on four interviews with journalists, a literature review and a practical project. I helped a journalist with his information seeking and later tried to organize the material. This project gave me an understanding of how varying the material that journalists use is and how difficult it would be to try to organize it in order to create an organizational knowledge resource of the material.

This paper intends to examine the knowledge challenges in small IT companies which is going through rapid growth. The movement of information and knowledge is a social and very complex process. The challenge for technology is the social as information and knowledge requires. To believe blindly that technology will solve the problem is what many people think. In order to understand how technology can support information and knowledge management one needs to understand what information and knowledge is.

Den här uppsatsen behandlar stridsvagn122 och Remote Weapon Station (RWS). Det finns ett verkansglapp mellan dagens kalibrar 120 mm och 7,62 mm. Observationsmöjligheterna i vissa situationer är begränsade. Syftet med uppsatsen är att undersöka vilka nya förmågor och möjligheter till ytterligare ett verkansalternativ en fjärrstyrd vapenplattform kan tillföra stridsvagn 122. De frågeställningarna som behandlas är: Vad kan en fjärrstyrd vapenplattform tillföra inom området stridsteknik? Vem i besättningen skall bemanna systemet? Vad kan en fjärrstyrd vapenplattform tillföra inom området graderad verkan? Metoden som används är kvalitativ textanalys.

The purpose of this Master?s Thesis is to examine the information use and information behavior of the scientists at the company ?Forskningsbolaget?. For this purpose an Information Audit was carried out using both interviews with six managers and a questionnaire, which was sent out to the entire population of 213 scientists. After finding out what information the scientists use and how they obtain it the aim was to answer the question of to what extent the company?s Information Centre can meet these needs.

This bachelor thesis includes two different manuals and design of an interface box between a test object and a general test station (computer) with ARINC429 communication.There are three different purposes with this project:The first is to setup a general test station with ARINC429 communication using a communications card from DDC (DD-42916i3-300) and software from Ampol Technologies (dataSIMS).The second is to design a new interface between the test computer and the test object. As well as implementing two components in the equipment.The third is to write two separate manuals to guide the users of this equipment. There are two different kinds of users of this equipment, technicians and system engineers. Technicians use the equipment to test and repair flight components. System engineers will implement new components in the equipment.The result of this project is a working test station with a new interface and two manuals..

Stationsetablering innebär bestämning av ett mätinstruments fysiska läge och orienterad riktning. I dagens bygg- och anläggningsbransch används nästan uteslutande fri station för att etablera en stationspunkt för mätningar. På en byggplats är tillgången till referensobjekt ofta begränsad. Instrumentets placering blir därför en kompromiss mellan tillgång till referensobjekt och tillgång till den plats där inmätning respektive utsättning skall ske. Denna kompromiss ger upphov till skiftande geometriska konfigurationer hos referensobjekten, vilka påverkar mätresultatet.Studiens syfte är att undersöka om simuleringar av fria stationsuppställningar i Svensk Byggnadsgeodesis (SBG:s) programvara Geo verifieras av fältmätningar och efterföljande beräkningar av osäkerhetsparametrar orsakade av konfiguration och mätta längder och riktningar.

Allt större och större andel företag väljer att presentera och förmedla varor och tjänster via e-handel. En viktig aspekt vid e-handel är att kunden känner förtroende för e-handelsapplikationen och företaget. Denna rapport redogör för vilken inverkan multimediala inslag har för förtroendet av en e-handelsapplikation, vid initialt användande. En undersökning har genomförts med hjälp av en kooperativ utvärdering av fyra e-handelsapplikationer vilka innehåller olika typer av multimediala inslag har.Resultatet av undersökningen visar att multimediala inslag inverkar positivt på förtroendet för e-handelsapplikationer. Däremot finns indikationer på att för hög grad av multimedialt inslag inverkar negativt på förtroendet för e-handelsapplikationer..

The aim of this masters thesis is to learn how an organization has solved its information management via intranet and document management. The purpose is to identify what different types of information are made available via an intranet, how this information is structured and what functions the intranet includes. Conventions, directions and advice about intranets and document management were studied, with the purpose to compare whether the systems of the company correlate with these. Other issues considered in the thesis, are how the employees of the organization use the intranet and how the document management is organized. To get an understanding of these questions the structure and functions of the intranet were studied empirically and a questionnaire on what the employees need and use, concerning the intranet, was sent out to 130 employees.

Volvo Hauler & Loader Division in Arvika produces wheel loaders which they deliverthroughout the world. The factory which is situated in Arvika is the largest wheel loader plant in the whole world, with its 1 100 employees. The different models stretch from L60E all theway up to the brand new L350F, with a loader capacity from six tons up to a staggering 35.The assembly of the different models are divided into three different assembly lines, Small(L60-L90), Medium (L110-L120) and Large (L150-L220). The assembly of Heavy (L350)has just been started with an upcoming pre series.This examination paper gives recommendations of improvements and necessary modifications to rationalize the pre-assembly of boom units. Three different scenarios are presented in the paper.

Rapporten är en undersökning gällande det som händer när en plats ändrarfunktion och karaktär. I Stockholm har pendeltågstationen Karlberg en centraloch social roll som kan komma att rubbas av dess stängning. Vår rapport kommersåledes handla om att undersöka och förstå platsen för att sedan geåtgärdsförslag på ett gestaltningsarbete i form av ett byggnadsverk..

The purpose of this study was to identify the positive and negative aspects of the work and dynamics of a management team and from that recommend how the team can improve. The aim was also to investigate whether there was a gap between how the members of the management team comprehend themselves and how the project, section and team managers comprehend the management team. The management team contains of seven core team members and is the head function of a research and development site in central Sweden. The results are based on interviews with the present members of the management team and three former members, a survey among the project, section and team managers and by participating observation on meetings with the team. The results show that the management team is an overall well-functioning team that with some changes and improvements, especially concerning communication and information, can reach even further.

In this project a washing station has been constructed for Albany International AB. At present, there is no existing system to clean the dirty pipes that are coming back to the company.The work followed the product development process, and it started with the requirements list. This was followed by brainstorming, evaluation and completion.The result was a concept for de present time and one concept for the future.The present concept is intended to be built immediately. This is an adjustable bench with sliding bearings to facilitate the work. The actual cleaning is done with a high pressure washer that uses hot water.