This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

Today, about 15 to 20 percent of Sweden?s total emission of carbon dioxide can be traced to the household sector. By examining apartment blocks in a life cycle perspective, the origin of the carbon dioxide emission has been charted and analyzed. This information has been used to create a computational model that calculates the total emission of carbon dioxide from a specific apartment block. The results from the analyzed apartment blocks indicate that both the use of energy and the emission of carbon dioxide have been reduced since the 1960s. Through the examination of building materials, it is possible to lower the emission of carbon dioxide that origins from the construction phase of an apartment block.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

Purpose: The purpose with this study is to clarify what importance a co-occurrence event can have on a smaller town, and also what positive and negative consequences it can have on the town seen from a social, economic and political aspect. I will also look at what magnitude the festival have on the local commercial and industrial life and how it affects those who live there. I will also determent how the moving of the festival might come and affect the local businesses, the local population and the community it-self.Method: I will thorough-out this study work with qualitative research methodology. I will there-for process the empirical data that will be collected and used for this study from a qualitative research methodology point of view. I will likewise go through with two deep-going interviews with people well familiar with the subject to increase and strengthen the validity of my study.

Because society?s demand for quality, efficiency at low cost is constantly increasing, companies are increasingly choosing to invest new methods to achieve these points. Those who manage to find ways to improve their processes are often the companies that have the greatest chance of becoming a winning player in the market. BIM is a new method that can reduce the internal costs while increasing communications between different parties. However there is disagreement about what BIM is and its purpose.

This paper examines how to use different kinds of source material for building surveys. The studyexamines how to use legends, construction archaeological surveys and Ground Penetrating Radar(GPR) as source material, and use them against each other to ensure the reliability they have.As a starting point I used Gräfsnäs castle ruin in Alingsås, Sweden, as an example. Gräfsnäs castlewas probably built in the Middle Ages and was rebuilt through the ages until it became a ruin in thelate 1800s. The castle ruin is today Alingsås most visited attraction.The investigation has focused on three areas which are located in the very ruin; rescue tunnels, thecellar vault and the treasure.There are legends that describe how the castle lord of Gräfsnäs fled an attack of the Danes in 1612 ina rescue tunnel which ended at the beach. At the construction archaeological surveys carried out in1935-36 they found a sewer in the courtyard that was once served as rescue tunnel and ended in themoat.

The aim for this study was to find out what strategies women use to not react against inequality and sexist prejudice. In the study I used a critical realistic approach through, primary, the social ontology presented by Margaret S. Archer. The study focus on both the women?s construction of femininity and their construction of masculinity and what directions it constitutes for the women?s social orientation.

Högbytorp is Ragn-Sells? largest waste facility and it is located north of Stockholm. There is an old landfill still in use, but at the end of this year it will be closed. The waste deposited on the landfill can, through decomposition, give rise to a large amount of methane gas, which is an energy rich gas that can be used for heat and electricity production. To receive a relatively large amount of gas, the decomposition requires a high moisture content in the waste.

With the growth of information stored over Internet, especially in the biological field, and with discoveries being made daily in this domain, scientists are faced with an overwhelming amount of articles. Reading all published articles is a tedious and time-consuming process. Therefore a way to summarise the information in the articles is needed. A solution is the derivation of an ontology representing the knowledge enclosed in the set of articles and allowing to browse through them. In this thesis we present the tool Ontolo, which allows to build an initial ontology of a domain by inserting a set of articles related to that domain in the system.

Abstract Title: Enabling Smart Research and Development through Knowledge Conversation Seminar date: 2005-06-08 Course: Master thesis in business administration, 10 Swedish credits (15 ECTS) Authors: Andreas Johnsson, Johan Rosendahl Advisors: Lars Bengtsson Key words: Knowledge management, Knowledge conversation, Research and development, Ba, Trelleborg Purpose: The purpose of the thesis is to create a model that shows how knowledge management aimed at research and development processes can be used and how the theoretical fields can be connected. Methodology: The thesis is based on abductive perspective where empirical and theoretical material has been mixed to create a foundation for the analysis. Theoretical perspectives: Theories concerning knowledge management and research and development have primarily been used. These have been complemented with material about team structures and incentive systems. Empirical foundation: The empirical material is based on semi structured, mostly qualitative interviews and strictly quantitative inquiries performed at Industrial Hose within the Trelleborg group.

Abstract The purpose of this project is to develop a modular processor card which is intended to work as a platform for Kitron Development Karlskoga. The modular processor card is meant to be used as a control system in development projects, mainly in medical and industrial products. The processor card will consist of a central unit with the basic functions for a control system. Furthermore there will be complete modules with machine commodity and programming, to pick exactly the necessary functions for a specific application. With consideration to the specification of the development and the main unit, I chose an adequate microprocessor (AT90CAN32) as core and interface circuits to stated border areas. The construction is first completed in the program MultiSim and then remade in the program OrCAD Capture. The programming language C was used in the software model.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

Denna undersökning är resultatet av en kandidatuppsats skriven vid handelshögskolan, Umeå universitet på uppdrag av Scania Industrial Control vid Scania CV AB i Södertälje. Scania arbetar efter ett produktionssystem (SPS) som har grunden i Toyota Production System (TPS) och tar formen av ett hus där Scanias värderingar, principer och prioriteringar framgår. Scanias framgång anses bygga på att nyttja personalens kompetens inom förbättringsgrupper, ett arbete som sker genom SPS. Historiskt sett har SPS tydligast återfunnits inom Scanias produktionsavdelningar, emellertid har arbetssättet börjat överföras i alla Scanias verksamheter för att genomsyra hela företaget. Scania ser i dagsläget över sina verksamheter för att nå långsiktiga effektiviseringar med målet att öka sin framtida konkurrenskraft.