Nimo Verken AB is the leading producer in the Scandinavia of drying cabinets. The construction has, with small changes, been the same since the 70s with a thermostat and a timer as controlling system. There was a wish to develop a modern cabinet which showed remaining time on a display and with energy saving functions.In this report we go through how it is possible to implement a digital controlling system, where remaining time is shown on a display and where it is possible to choose a preset ?program?.The report first presents the fundamental theory for a PIC, where we describe the different registers, how interrupts are handled, the internal clock function and how data is sent to control the different parts of the construction.Next the report presents and describes the new hardware that is needed, such as the encoder, the temperature sensor and the display.After the theory we describe how the program in the PIC may be drafted. Last in the report we have the result of the tests of the temperature variations and the accuracy of the time..

The primary focus of this Master thesis is to study how industrial house building can be implemented during production of rental flats under the terms of public procurement. In order to determine a suitable working process as well as presenting a possible architectonic result of the process, a case study is carried through.A housing projekt is designed on a site i Malmö, where the commisioner is MKB Fastighets AB and the contractor is NCC Komponent with the industrial building system NCC Komplett. The focus of the design is to accomplish high quality apartments to a resonable price, as well as solving the overall scheme for the site.The housing projekt, Kv. Flaggskepparen, built on the consept of a single house model, used to handle the entire site, shows that the building system is well suited to accomodate the commisioners demands.In order to reach the best possible architectonic result with the building system, cooperation initiatded in an early stage of the process is neccesary.A model is proposed to handle the situation under the terms of public procurement. The model suggest that the geometrical design is mainly carried out after inquiry and that architectonic qualities should mainly be defined in a non geometrial way for inquiry..

This cross-sectional study investigated the use of health benefits in relation to the self-rated health of employees at two medium-sized industrial enterprises in Hälsingland. The method used to investigate this was through a self-designed questionnaire consisting 19 questions about health, lifestyle and health benefits at the workplace. A total of 100 questionnaires were distributed in the two companies, hence 50 surveys at each workplace. The response rate was measured to 88 % and 74 %, which means a loss of 6 persons and 13 persons. The results showed that Company nr 1 offers its employees a health benefits consisting of free access to gym in the company premises after working hours and financial contributions to training-cards.

A group of companies that only recently has caught the attention of Swedish designers, enterprises and media are the so -called "furniture pirates". In Sweden it?s mainly two companies that have ended up in the spotlight. The online stores Ikon M and Designers Revolt are two companies which currently sell replicas of famous Swedish and foreign designers. Although the designs sold are copyright protected in Sweden, and most other European countries, the right holders can only stand by and watch as more or less exact copies are sold for a fraction of the price of the originals.The business model - to exploit the EU?s free movement of goods and the UK's short term of copyright protection in matter of mass-produced art (industrial design) - has proven successful for the companies that practice it.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

The following article consists of two parts; one part is about house construction and the other is a specialization about radon. The house construction part describes how to project a house from start. It contains the conformation of the house, the installations needed, calculations considering the strength of the construction, energy calculation and what materials were chosen. Calculations considering the costs of building and operate the house has been carried out. The result showed that the house would cost approximately two million Swedish kroner to build and thirteen thousand kronor a year to operate.

This report describes the scientific work of designing and manufacturing an intelligent controller module prototype for automobile trailer connections. The functions of the module are both to drive the lamps and detect failures. The module also contains functions to handle other functions of the trailer. To learn about controller modules the group does extensive feasibility study.The group receives three already existing modules, the functions of the three modules are studied and tested in the lab, this is done too get a overview of the construction. The method used I called reversed engineering, a way of constructing by analyzing constructions already done.When the modules are analyzed, the functions of the prototype are tested and designed without copying the analyzed modules.

The following report comprises my bachelor´s thesis in Industrial design, 30 hp. It is executed in collaboration with Bonum senior housing, who has been the client and assignment- maker of this project.The goal was to design a bench for their entrances, which could represent not only the needs of the target group but also Bonum as a trademark. The work is done with great care for both human kind and the environment, with sustainability as beacon.The design process has been followed.Initially, you will find the definition of a bench for entrances, the framework including inclusive as well as sustainable design, a function- and market analysis followed by the inspiration part of the project. Getting to know the target group and their specific needs has been essential for this work.Investigations about what senior house living and senior products are and what the target group thinks and feels, has been done. As a result, two ?personas? has been developed.With the help of a purposely chosen group of people, surveys and ergonomic studies has been executed, as well as prototype-testing.The fact-finding has formed the stable and unavoidable foundation of this project, which later on gets more creative and idea based.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

To the sewer systems households, industries and other activities are connected. The wastewater is collected at treatment plants where a nutritious sludge is produced. The sludge does not only contain nutrients, but also hazardous substances originating from different activities in society. To reduce the flow of hazardous substances to treatment plants and to create a sustainable recycling of plant nutrients the Swedish Water & Wastewater Association has developed the certificate system REVAQ. This certificate requires a good quality of the sludge but also that the treatment plants maps the origin of the unwanted substances.

Shear Strength and Deformation Characteristics of Uppsala Clay with CRS and Standard OedometerTyra Morell Bonin & Magdalena MählerTo see how much a clay compact under different pressure one can use several different methods and in this project, two methods were used, the Standard Oedometer and a CRS apparatus. A Standard Oedometer is a full-time manual device and the CRS apparatus is a modern electric and automatic device. The aim of the project was to see similarities and differences between the two methods and examine which method that were most reliable. This has been done with repeated laboratory tests and afterward evaluations. With this information one can get a picture of how the clay will behave and how it will deform in nature.

Lime Hempcrete consists of lime, water and hemp and creates an insulating, sound-absorbing, lightweight and environmentally friendly material that can be used in wall, roof and floor structures (Bevan & Woolley 2008). This construction method is not yet developed in Sweden as there has been a ban on the cultivation of the hemp plant. This ban on the cultivation of hemp was removed in 2003, when the material got a boost. You can use it in many different ways and not just in the construction industry (Ahlsten, 2010).In this study we have investigated the possibility to produce prefabricated wall elements of LHC. We have also studied its mechanical properties and dehydration time.

This thesis examines and measures differences in effciency between L1- and L2 language use for solving referential problems. Quantitative measures used in the study were time and error frequency. Qualitative measures, such as how the tasks and the participants own performance were experienced, were measured by an post interview and two questionaires. Two different tasks, a sorting task and a construction task, in which each informant was given the role as a constructor or instructor, were used for data gathering. A total of 20 dyads, divided in two language groups (English and Swedish) participated in the study.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

One of the most crucial entries in the financial statements is revenue. Despite the importanceof revenue a lot of mistakes are made concerning this entry because of the extensive room forjudgements. Especially in the construction companies where a lot of differences exist due tothe fact that different standards are used for similar business transactions.The research concerning IFRIC 15 and the new upcoming standard for revenue recognition isnot very extensive. Studies including both IFRIC 15 and the new standard are even morelimited. Therefore this study aims to compare the effects of IFRIC 15 and the new upcomingstandard for revenue recognition, Revenue from Contracts with Customers, in three Swedishconstruction companies.