This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

The purpose of this master?s thesis is to examine how femininity, Silikon, Vecko Revyn, and Darling. The study is made from a critical discourse analytical approach and text, pictures, and layout are all analysed. Some of the main characteristics of the material are the division in the categories"we"and"them", double messages, and personal address to the reader. Femininity is strongly associated with body, sexuality, beauty, and looks.

The requirements of good quality and appetizing fast food increases continuously as a consequence of a community where food is always available. The crispiness of French fries is an issue that must be considered in this context, since it tends to decrease and give the fries a soft surface not appreciated by the consumer. To prolong the crispiness, the fries can be coated by a batter, a mix of starches. The batters used often consists of modified starches, e.g. cross-linked, acetylated and dextrinizated to increase and prolong crispiness, flour to stabilize the batter and sodium bicarbonate to make the batter ?rise?.The cross-linked starch keeps the granules in a swelled state and prevents them from breaking when exposed to heat or processing: therefore, it delays the gelatinization and decreases the stickiness of the batter.

This report is focusing on problems with introducing standard enterprise resource planning systems (ERP) in businesses. A study has been carried out on a service and support department at a Swedish heat metering company, SVM North Node. The study aims to help the company become a better customer in choice and customization of a new ERP system. We make a description of the department studied and the work carried out there, on the basis of learning, knowledge and cooperation. As a final point we present some ideas on how computer systems could support their work, hoping that this will result in them making adequate demands on a new ERP system.

A common way to stabilize high rise buildings is to use an elevator core built of concrete. Today, we use to build these elevator cores of in-situ concrete. Precast concrete twin wall (double wall) is a semi-finished product that has become more common in recent years. This diploma work studies how the twin wall works out as structural elements in an elevator core. The work also shows some possible ways of designing twin walls and highlights some important parts of the design that will be vital to the stability of the building.    The result shows that it is important to think through where the element joints should be placed.

AbstractThe purpose of this essay is to discover the driving forces in top athletes, concerning training, body image and social positioning. Furthermore the object is to study how important being fit is for social reasons in today?s society. The athletes have been interviewed face-to-face and described their personal drive regarding training, their goals and the significance of the sport. They have also described how they see the image of the ideal body that currently exists within the field of sport and society and how training affects their own body image.

This examination work is the final work in our education to become a Bachelor of Science inMechanical Engineering by the University of Lund.The main purpose with this work has been to develop a new effective material handling system for TPPM AB in Lund since the existing system starts to become out of date. The future system that is going to be installed shall have the capacity to support all machines with unit-, semi- and finished goods during full production. The work has also included studying the possibilities to change the material flow in a positive way between the storage and the production when one is using existing buildings.During our work we have been used a simulation program called AutoMod, performing company visits, interviews and reviewed internal and external information to create a picture of what the best conclusion can be. During the work we have contacted five suppliers to receive system solutions and quotatioris. The suppliers, which have been contacted, are Swisslog, Moving, Rocia, Christensen & Hansen and ABB.

Many studies have been conducted of different types of business networks in recent years. Despite this, there is a lack of research concerning industry-transcending formal networks which are limited to a specific region. We have conducted a case study of Örebro Promotion, which is an industry-transcending network including over 500 members. Örebro is a medium-sized city in the middle of Sweden. The purpose with our study is to create an understanding of why enterprises choose to be a part of the network and what they feel is the gain of their membership.

Background: Triage is the sorting of patients according to the severity of medical assessment. Triage has a long history of use in Anglo-Saxon countries but is a fairly new method in Sweden. Researchers have described the Manchester triage group method (MTS) and a literature review of the concept; working contentment and competence focusing on triage. Aim: The ambition with this study was to describe a number of triage nurses working conditions. The research questions were; working with MTS- does it bring work contentment? What kind of competence is needed? Method: Data was collected from 74 triage nurses by a questionnaire containing 37 questions and two questions provided the nurses the opportunities to describe their triage experiences.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

Turning solar collectors, heliostats, is certainly not a new idea but has been explored for at least two decades. Projects on this subject have resulted in more or less realistic constructions, in a commercial point of view. Far too often the technical goals have had higher priority than the economical, which has resulted in a few constructions having the ability to compete with conventional, fix solar collectors. The economical issues have been given high priority in this project, without decreasing the demands on reliability. The system has been given the following mechanical and electronical properties: One-axis movement, fix heat carrying fluid system, microcomputer controlled movement and automatic protection from overheating.

The family and relatives caring of older people in Sweden lies on an old tradition. By legislation the responsibility for the older people has gone through a development from the family to the society. According to the new social service law (2000) it is not that clear that the utmost responsibility lies on the society. According to the social service law ( 5th chapter, 10 §) the municipality should ease things up by giving support and relief for relatives taking care of older people, prolonged ill and function disabled people. The purpose with the study was to examine how the family care givers are finding their everyday work and their experience of the support that the society is giving.

The purpose of this paper has been to describe the project manager's experience of the customer relationship in customer order projects. A qualitative interview study has been conducted in which seven project managers were interviewed. A thematic analysis resulted in four overall themes. The results showed the importance of a clear, responsive and open communication as well as a large degree of customization to meet the customer the best way as possible. The experience was also characterized by a dynamic relationship and the importance of the customer's expectations.

The aim of the study was to investigate social workers and managers experiences of ending child welfare investigations within the statutory period of four months. We also investigated their experience of investigation time is used in practice. To get answers for our purpose, we conducted a qualitative study. We strategic selected three social workers and four managers to our interviews.The results showed that both social workers and managers have experience with child welfare investigations that are not completed within the statutory time. A township that departed had no experience.

This report describes the development of a sample loader for my diploma work at Q-linea AB in Uppsala. The sample loader will replace the process of loading fluid samples into Q-linea?s instrument for biomolecule analysis. The earlier process was done by hand and was a time consuming and inefficient task.The work was initiated with a design phase where an overview of the system was created. The sample loader will be receiving text commands from a PC that coordinates all the subsystems like pumps and lasers on the analysis instrument.