This thesis is made by Carl Persson and Alejandro Saavedra for Gryaab. Gryaab is Gothenburg?s water processing plant and produces about 60 GWh biogas annually with a flow around 1150 Nm3/h. Gryaab wants to research their possibilities to become independent with electrical energy and the possibilities to enrich, upgrade biogas. The use of methane rich gases like biogas and natural gas is today low in Sweden compared to major parts of the world.

The first part of the thesis consists of a brief introduction to the general principles of target detection and the sensor-systems used. In the following part there is a theoretical description of the algorithms this thesis focuses on. The detection algorithms described in this paper are called Cell Average, Ordered Statistics, 2parameter and Gammadetector. Two different discriminators called Extended Fractal Features and Quadratic Gamma Discriminator are also described. The algorithms are tested on three different types of data, simulated SAR-pictures, authentic SAR-targets and IR-pictures.

This thesis was performed at SverigeGrepen AB. SverigeGrepen is a company that hasone product on the market; a manure fork that is designed to be used for mucking inshavings or peat. The aim of this thesis was to develop a new manure fork that isadapted to be used in straw.The development started with a pilot study where experience of mucking wascollected to be able to understand what and why certain characteristics are importantfor the function and use of the manure fork.A basic concept was developed where the main function was fulfilled, which meantthat a separation between dung and straw could be performed in a way that wasbeneficial for the user.The work resulted in four concepts of how a manure fork could be used in the strawthat can be designed and constructed. The conclusion that the work gave was that allconcepts met the main requirements required by a manure fork to use in straw.However, concept four provides a good visual impression, while its benefits areassumed to be important qualities..

Forest streams and the associated riparian zones are sensitive to disturbances and changes that occur within these riparian areas. Particularly sensitive are small streams of low order, which will have large impacts down-stream. The disturbances that occur in the riparian zones are reflected quickly in the stream. Driving with forestry machines in the riparian zone will have detrimental effects to the soil and water. Driving the machines will lead to changes in the mineral soil composition, resulting in the reduction of porosity, less infiltration, compaction, and an increased bulk density.

The purpose of this thesis is to investigate the relationship between urban transformation and the occupation movement in Sweden, aiming to identify the movement's characteristics and comprehend its changes over time. By analyzing qualitative material collected from occupants active within a span from the 1980 to the present, we examine how the occupation movement has evolved. We investigate the motivations behind the movement, the lifestyle of occupants, and their potential gains to get a better understanding of the culture. We explore the prefigurative politics of the resistance where occupant activists create alternative lifestyles aligned with their desired future, bypassing the wait for broader societal changes. Finally we inquire the current possibilities of creating and defending meaningful urban spaces and social scenes..

The purpose of this thesis was to examine how locally produced bioenergy may contribute to meet the climate target year 2050 in the municipality of Uppsala. The goal of reduced GHG-emissions from current 6,8 ton CO2-equivalents to 0,5 ton CO2-equivalents per capita and year, year 2050 is based on avoiding harmful penalties of an increased level of GHG in the atmosphere. By estimating available biomass in the county together with examining future technologies and emission factors for the substrates used, four possible future scenarios has been developed focusing either on electricity generation or production of biofuels. GHG-emissions of year 2050 have been calculated using the software LEAP. The conclusion is that bioenergy, depending on how it is integrated in the energy system, may reduce greenhouse gas emissions between 0.6 ton CO2-equivalents and 1.4 ton CO2-equivalents per capita or 12% to 25% compared to 5.5 ton CO2-equivalents in the reference scenario 2050. The greatest reduction is obtained if biofuels are produced in combination with energy efficient heat requirements in buildings..

I detta examensarbete undersöktes möjligheten att installera värmeåtervinningssystem för ett flerfamiljehus i Hovgården som ligger en bit utanför Borlänge. I rapporten redovisas två olika sätt för energibesparingar som är aktuella för att ersätta borttagning av oljepannan som används i huset i dag. En rad svårigheter dök upp under undersökningen för installation av nytt värmesystem. Lämpliga lösningar kunde hittas efter mycket analys. Syftet med rapporten var att undersöka möjligheten och lönsamheten för installation av något av följande system; FVP eller VBX-modul som kan återvinna värme ur frånluften.

Rooted in Industrial Ecology (IE) theory, this report evaluates how urban agricultural concepts and techniques, can contribute to improved ecological sustainability within the inner city boundaries of Stockholm. An overarching literary study as well as an interview was carried out, resulting in a qualitative analysis followed by suggestions for practical implementations. A substantial convergence was found between the eco-restructuring objectives of IE and the principal motives for urban agriculture. Consequently, eco-restructuring objectives are found in varying degrees in the presented urban agricultural techniques. Industrial symbioses, permaculture and combinations of urban agricultural techniques are tools which are capable of corresponding adequately to the diversity of urban settings.

In this thesis proposals for different designs of a borehole thermal energy storage (BTES) have been developed for the building DN-huset in Stockholm, Sweden. To build a BTES results in savings in energy costs by approximately 44 %, i.e. 2 million Swedish crowns annually. Furthermore, a BTES would reduce the annual environmental impact with roughly 75-157 tonnes of CO2 equivalents per year, depending on how the electricity consumption?s environmental impact is estimated.

The expansion of the Swedish hydro power has contributed positively to the reduction of the environmental impacts from the fossil fueled power production. In the same time the extensive expansion has been proved to cause negative ecological and local environment impacts of a stream. This, in turn, has been affecting the biodiversity and fish stock negatively, which has been reduced. One of the underlying problems is the lack of possibility for the fish to pass the plants, but it is also directly correlated to the mortality rate of the fish passing through the turbine, which this study is investigating.The mortality rate has been computed for three different locations in Sweden, Untra, Tännfallet and a third one whose location is confidential, and is denoted as Case 1, 2 and 3. The model used to calculate the mortality rate in this investigation is based by existing blade strike models and knowledge and are investigating the death due to mechanical injuries from collision with a runner blade in the turbine.

The aim of this essay was to obtain an understanding about company owners thinking about the connection between having an own company, and the risks for an alcoholic abuse. The risk factor I was researching was stress, alcoholic culture, accessibility and rehabilitation.I have interviewed five owners of small companies, two women and three men, which represents four different kinds of branches. The theories I used in analysing the empirical findings where the theories of psychosocial work environment of Lazarus, Karaseks demand/control model, epidemiology- and culture perspective.I have found that the main stress factors for company owners where the economical stress and great load of work. The stress was also related to the fact that company owners of small companies often were alone with all the responsibility and problems.Women did not use alcohol very often as a tool to reduce stress. If individuals were using alcohol to reduce their stress, it also had to deal with their ability of coping and also what channels they had for coping..

Sitka spruce (Picea sitchensis) is a tree species that have its natural distribution along the West Coast of North America, from Alaska in the north to northern California in the south. Sitka spruce is a typical coastal tree species that can reach heights up to 85 meters and occurs in single pure as well as in mixed stands. The main purposes of this study were to describe the Sitka spruce growing characteristics and the volume production in comparison to spruce (Picea abies). The possibility to predict future volume production by using prognosis tools designed to be used on spruce were also studied. The material that has been used in this study are permanent sitka trials established by the Faculty of Forestry fixed Sitka trials and also material gathered in this study. A literature study was also carried out in order to determine the Sitka spruce growing characteristics. Sitka spruce has a high adaptation and a high volume production on a broad scale of soil types. The tree species is a pioneer species that has a fast early growth and in combination with sharp needles it is less susceptible to animal browsing than spruce. The factor that is the single most limiting factor for where the Sitka spruce can be planted is frost. This factor can be limited by using plant material with a well-suited provenance. According to the literature, the Sitka spruce has an average total volume production that is between 20-40% higher than spruce.

The understanding of the role of nature for rehabilitation of both physical and psychological afflictions has greatly increased in the last few years. There?s a lot of science that describes the healing effects of nature. The rehabilitation garden in Alnarp has contributed with very positive results from the treatments of patients with burnout syndrome. In the first stages of rehabilitation, the need for calm is very important and a demand-less and stress-free environment is of essence.

This thesis researches the value creation process in Internet based subscription services in accordance with service dominant logic. The aim of the paper is to identify the characteristics of these services and to envisage the future of Internet based subscription services. The authors have utilized a qualitative method in their research which consists of personal interviews as well as a focus group. The main theoretical subjects that are discussed are value creation, customer participation and service dominant logic. The paper analyses the empirical findings by matching them with the theoretical framework.

The company LightLift Esystems AB manufactures patented motorized lift systems for the illumination of halls with high ceilings. The company wants a new design for singular heavy lights in order to be more competitive.This project consists of the development of the new design under the requirements and specifications imposed by the company. The new design must support lights up to 300kg and keep the overall dimensions as low as possible without modifying the driving unit.This document contains all the designing steps followed to reach the final solution as well as the material selection, manufacturing process and assembly of all the parts that form it.The solution obtained shows to be very competitive with other alternative products, since this new design triples their maximum load capacity while the dimensions are very similar.In this context, the optical appearance was also very important to the company and so it was another main objective of this project. From an aesthetical point of view, the final solution proves to be very compact and versatile since it can either be hidden behind a false ceiling or covered by a plastic case that gives the design a very nice look.Finally, the solution achieved fulfils all the requirements and specification previously imposed. It is reliable, compact, cheap to manufacture, easy to assembly and it has a good optical appearance. .