Several technical solutions are ready to step forward as the new generation of propellant, and this report aims to explore the possibility of commercializing fuel cell cars. The report is based on current research and data from today's technology and engineering solutions that are estimated to be commercially realized before 2020.A mapping of today?s different fuel cell options has shown that the most suitable fuel cell option is the Proton Exchange Membrane Fuel Cell, which uses hydrogen as fuel. The report is focusing on a techno-economic well-to-wheel analysis of hydrogen and the energy balance and costs in a system perspective. The basis for this analysis consists of two centralized methods of production, steam methane reforming (SMR), and alkaline water electrolysis.

This degree project has been carried out by Oscar Adolfsson and Marcus Blomqvist, during the spring of 2010, both studying to become Bachelor of Science in Innovation and Design Engineering, at Karlstad University. The degree project includes 22,5 credits.The work is done on behalf of Etac Supply Center AB in Anderstorp. Etac is a company developing and manufacturing home health care products, with operation in Sweden, Norway, Denmark, England and Germany, and with sales worldwide. Bo Lindqvist, R & D manager has been the contact person at Etac.During the project the students has had a workplace at Semcon Caran AB in Karlstad. Semcon has also been helpful as a sounding board.The objective of the work has been developing a new, wall mounted shower chair, assigned for persons with difficulty to stand up while showering.Etacs requirement of the shower chair is that it should be able to support a user with a weight of 100 kg, the chair shouldn?t have any outrigger, optional should be armrests and backrest.

Sammanfattning Projektet, Nytt koncept för linspridning, vilket tillhandahölls av Abu Garcia, bestod i att vidareutveckla multiplikatorrullen, Ambassadeur Classic 5000c. Målet var att konstruera en multiplikatorrulle, med vilken fritt utkast erhålls. På dagens multiplikatorrullar passerar linan genom linspridaren, detta medför att linan följer linförarens rörelse under utkastet. Till följd av linförarens rörelse genereras friktion, vilket i sin tur ger ett kortare kast. För att öka kastlängden, skall linspridaren ej vara i kontakt med linan under utkastet. Det är dock viktigt att linan sprids direkt på spolen vid påbörjad invevning.

Kockums i Karlskrona har givit i uppdrag att ta fram lösningar till öppningsmekanismen för större bordläggningsluckor på marina ytfartyg. De önskar att luckans dimension ska vara max 10 * 3 m. I uppgiften ingår att ta fram en lösning på öppningsmekanism, simulera öppning och stängningsförloppet i Virtual Reality samt utvärdera konstruktionen enligt givna lastfall. Acceleration är ett exempel på laster som luckan kan tänkas utsättas för under öppet läge samt under öppning och stängning. Första delen av rapporten innehåller principkonstruktionen, här har det tagits fram ett antal lösningsförslag som visas med enkla skisser. Dessa utvärderas i olika omgångar mot de krav och önskemål som tagits fram i samarbete med Kockums.

Students at the School of Engineering at Jönköping University have on behalf of the swimming organization ?Nässjö Sim och Livräddningssällskap? conducted research on how to monitor and evaluate swimmers and swimming groups in a simple and efficient manner with a focus on usability and user friendliness. Since no system existed that could meet these requirements, the client had a desire to tailor and develop such a system. The purpose of this work was to develop a system that would work as a tool to be used by coaches and swimmers alike and allow them to eventually follow the development of swimmers and swimming groups. The organization also wanted to have the ability to create tests and exams, both for land and water training, register these in the system and in a structured way know which swimmers took and passed these.For this thesis, the following questions functioned as a framework for progress.UsabilityHow to design a usable system and what is required?SystemWhat type of system is best suited to meet the client's requirements and preferences?Competition resultsHow can one retrieve all the competition results for swimmers of Nässjö SLS?DatabaseWhat type of database is best suited to easily share data with an external existing database?Usability has been the main focus throughout the project.

This is a thesis for a Bachelor Degree Project, performed in the subject MechanicalEngineering. The students Roger Malmberg and Simon Hagberg have carried out adesign project on behalf of the recently established company J&D Assisting systems,located in Halmstad.The project consisted in developing J&D's first prototype of a power assisting solutionfor wheelchairs. A power assisted wheelchair combines human power, which is deliveredby the arms through the pushrims, with electrical motors, which are powered by a battery.The power assisted wheelchair is aimed at customers, who have used a regularwheelchair for a long time, but who have become weaker or just need additional powerwhen driving uphill. This kind of wheelchair will provide additional power for users,which will spare their wrists, elbow and shoulders. The product is torque sensor free andinstead it relies on the velocity.

This report contains a degree project made by the mechanical engineering students Lennart Andersson and Daniel Jansson. The project has performed in assignment by SOMAS Valves AB in Säffle. SOMAS are leading in development on control and on/off valves. To maintain this position they always want to improve their products. One way in this development is valves that are more tightened.The purpose with our project was to investigate another seat design on a HiCo (High Cobalt Alloy) seat to a SKV 150 PN 25 valve and compare this to an original HiCo seat.By modifying the seat on a ball valve we want to achieve a valve that leaks lesser then a valve whit original seat.

AbstractThis bachelor?s thesis at the Department of Production Engineering at the Royal Institute of Technology in Stockholm deals with the subject of automated metrology. The degree of automation of tasks within production has been a growing trend but the measurement of quality has not followed the same trend. The main thesis follows:What incentives are there to automate the measurement of quality in production?What factors are crucial and why are not all metrology automated?The thesis comes along with a number of sub-queries and delimitations.The working method includes both theoretical and empirical studies.

Syftet med detta examensarbete var att utvärdera tre olika metoder för mätningav energiomsättning hos människokroppen med förhoppningen att kunna komma fram till en enklare metod vilket kan underlätta främst för patienter men även för sjukvårdspersonalen. Utvärderingen grundas på mätningar av BMR.Det finns flera olika metoder att mäta energiomsättningen och jag har använt mig av indirekt kalorimetri (referensmetod), bioimpedansmätning (BIA) och Sensewear Armband. Den sistnämnda är en helt ny metod och det är denna metod som främst har utvärderas gentemot de andra. Mätningarna med alla tre metoderna utfördes vid samma tillfälle efter fasta för varje försöksperson (n=10)och patient (n=2). Armbandet bars i tre dygn, indirekt kalorimetri mättes under 30 min och BIA mättes vid ett tillfälle.

Dagens film och spelkoncept inom genrerna science fiction och fantasy börjar likna varandra mer och mer och för oss känns inget längre annorlunda. Genom att basera dem på historiska samhällen och kulturer hoppas vi på att bryta normen. Vi hoppas att med detta som grund kunna skapa realistiska och trovärdiga folkslag som skiljer sig från det som funnits tidigare. Detta examensarbete handlar om konceptutveckling av en fiktiv värld och tre fiktiva folkslag. Konceptet skall kunna appliceras på både film och spel men även litteratur eller andra medietekniska områden.

This thesis examines history of the subject of mechatronics and innovation. The main reason tostudy mechatronics from a historical point of view is that it has never been done to a greater extent before. An overview is justified because various definitions have been used over the decades, but nowadays the subject has become more established. Focus in this thesis is mainly on development of the subject of mechatronics at Royal Institute of Technology in Stockholm. Innovation is the other aspect of this thesis.

Kunskapsöverföring är en nödvändig förutsättning för att säkerställa organisationers existens och framåtskridande. Utgångspunkt för denna uppsats är förstudiens roll i mjukvaruprojekt och dess betydelse för den fortsatta systemutvecklingsprocessen. Fokus liggerpå kunskap som genereras under förstudien, samt hur och i vilken omfattning kunskapen förs vidare till analysfasen i systemutvecklingsprocessen. Resultatet visar att förstudien utgör ett viktigt beslutsunderlag och är en nödvändig förutsättning för att gå vidare i systemutvecklingsprocessen. Kunskapsöverföring genom dokumentation och via muntliga föredragningar är otillräcklig, eftersom det finns ett ?filter? som innebär att erfarenhetsbaserad kunskap inte överförs mellan förstudie och analys via dokument eller via muntliga föredragningar.

The main objective of this thesis was to develop appropriate strategies and find factors that affect the usability of parameterized designs. This was accomplished by investigate the user-interface and how it is designed to meet the user's information needs. The thesis also embraces the basic theories in terms of investigation, cognitive design principles and human behavior patterns in the interaction with the machine. The approach has led to an explorative investigation in this subject area.The thesis also had the purpose to achieve more efficient ways for development of motor chainsaws at Husqvarna AB's department Global Cutting Equipment. That can be achieved through reduce costs of development per sold unit.

This thesis has been performed at Scania CV AB Technical Centre in Södertälje and its aim hasbeen to study the causes and effects of deformations in the interface between the rear axlehousing ADA1100 and the central gear house R780 during operation. Design changes that wouldincrease the sealing capability of the studied interface are also suggested. Finite element (FE)and CAD software have been the primary tools in this study.Finite element (FE) simulations are used in the industry to predict and develop engineeringdesigns. The main motive for FE simulations has traditionally been to identify weak spots in thedesign, regarding high tensions and large deformations.The FE model is an aggregation of submodels and interface models that represents the rear axlehousing, suspension, central gear, central gear housing, wheels, bolts and weldings, and theirinteractions. The submodels have different material properties and they are connected withcontact interface models.Boundary conditions are defined on the bushings in front of the rear axle and on the air bellowsbehind the rear axle.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.