In the EU there are EC Directives that Member States of EU should follow. Sweden has undertaken to transpose EC Directives regarding the working environment to Swedish Provisions.  In 4 April 2006, the European Commission had some criticism against the Swedish implementation of the Construction Sites Directive. The Swedish Work Environment Authority has in response to this criticism reworked the Work Environment Act and related provision about building and civil engineering work. The changes came into force 1 January 2009.These changes have resulted in some working methods and even new responsibility subjects must be reviewed. The purpose of this exam project was to investigate if contractors and clients in the construction sector, had have time to update themselves on this front and adapt to these changes.

This thesis is about developing a design that provides improved vacuum seal between a lead coating and a plastic coating during plastic extrusion processes of cables. This report is a part of the course MSGC 17 for Bachelor Engineers in mechanical engineering.The work is performed at Nexans Norway AS in Halden where they have a production of high voltage cables for sea-, and offshore industry. A problem they face is that they do not get enough good seal at the attachment to the plastic extrusion machine. They want to achieve a vacuum between a lead coating on the cable and a plastic coating of the cable for plastic extrusion, which is something they do not achieve today. The thesis is thus to come up with a design that provides better sealing against the cable.The work involves a construction part with the phases of product development processes.

The euthropthication of the Baltic Sea is a threat that is beginning to be taken seriously by the governments concerned. In Sweden, regulations concerning the allowed nitrogen (N) concentration in the effluent water from wastewater treatment plants are being tightened up. The Rimbo wastewater treatment plant has been imposed to reduce the annual mean concentration of total N in the effluent water to levels below 15 mg l-1. A more and more common way to reduce the nitrogen level in wastewater is to let the water pass through a wetland. This study investigates the possibility to build this kind of wetland at the outlet of the Rimbo wastewater treatment plant.A prestudy of the topography, soil characteristics and groundwater flow indicates that the land area in question is well suited for the construction of a wetland.

AbstractConcrete foundation slabs are usually exposed to unilateral drying during the curing process. The unilateral drying causes an axial shrinkage and a concave curvature of the construction. The curvature results from the fact that the upper part of the slab is drying and shrinking faster than the lower part. This is called gradient shrinkage.A problem occurs when the slab is considered fully restrained by adjoining structural parts. The deformations caused by axial contraction due to the constant part of the shrinkage and the curvature caused by gradient shrinkage of the slab are then prevented by the fact that the slab is fully restrained.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

Denna magisteruppsats redogör för en anpassning av COCOM (Contextual Control Model) till flygledningsdomänen. COCOM är en modell som kan användas för att beskriva och förutse kontroll hos operatörer i komplexa system. En central del av modellen är begreppet kontrollnivå vilket beskriver hur graden av kontroll hos ett JCS (Joint Cognitive System) beror av och påverkar de parametrar som beskriver dess prestation. Fokus i denna uppsats ligger på det JCS som omfattar flygledaren i sin arbetsposition.I uppsatsen anpassas Hollnagels generella beskrivning av kontrollnivåer i COCOM till flygledningsdomänen. Till grund för anpassningen ligger en kvalitativ studie i form av observation och intervju av sju operativa flygledare vid en svensk kontrollcentral.

This report is the result of a degree project in building engineering, at an advanced level. The project evaluated a building from a technical and historical point of view, and focused on its energy consumption, particularly the energy used for heating. The building in question was a small apartment building in Strömsholm, Sweden. It was made in 1902, from vertical logs, a not so common form of the traditional log house. The goal of the project was to evaluate if the energy consumption could be reduced in accordance with building preservation regulations, that is without damaging any of the building?s cultural or historical values.The building was surveyed with the help of archive and literature studies, interviews and inspections.

This bachelor thesis concerns a region in central Turkey ? Cappadocia - and its need of a sustainable tourism development. A town called Ürgüp is located in the centre of this region, which mainly consist of a rich geographic, cultural and historic access.Our focus in this essay will be concerning Ürgüp and the importance of a sustainable tourism development. Our intensions are to examine what Ürgüp has to offer as a tourist locality and how Ürgüp can maximise its visitors through a sustainable development. We also examine how the locality can be developed in a tourist perspective.

Vid Industriellt UtvecklingsCentrum i Olofström AB utförs bland annat slitageprov av verktygsstål vid plastisk formning av plåt. Parametrar som undersöks är verktygstålsmaterial, plåtkvalitéer, ytbehandlingsmetoder, smörjning och olika kombinationer av dessa faktorer. Den nuvarande testmetoden upplevs av IUC som icke tillräckligt produktionslik. Därför skulle det vara önskvärt med ett mer produktionslikt slitagetest än det nuvarande. Vårt uppdrag var förutom att utforma ett nytt slitagetest även att undersöka intressenters synpunkter på den nuvarande testmetoden och önskemål om ett framtida slitagetest. Inledningsvis inventerades befintliga slitagetestmetoder för att försäkra sig om att särskilja det nya testet från befintliga testmetoder och kartlägga vilka egenskaper som undersöks. Eftersom önskemål om ett mer produktionslikt slitagetestmetod fanns behovet av att göra en studie för att definiera begreppet mer produktionslik.

Som grund för denna uppsats ligger en tidigare undersökning med titeln Undersökning av mental arbetsbelastning under instrumentflygövningar (Andreas Johnsson, 2004). Denna uppsats utgör en fortsättning på ovan nämnda undersökning. Liksom i Johnssons (2004) undersökning har en subjektiv mätmetod baserad på en niogradig skala använts för att utvärdera svaren på den enkät som använts för att få fram data. I denna uppsats undersöktes samma kurs som i den tidigare undersökningen. Det vill säga studenterna i kurs 03:2 vid Trafikflyghögskolan, Lunds universitet.

Background and problem: The abolishment of the mandatory audit in Sweden resulted in a marketorientation in which the small sized enterprises gained a stronger position. Theaudit firms are faced with the challenge to better meet the clients need and todemonstrate the value of audit now when it is optional. In coherence with thisclient focus it is endorsed to implement a value-based pricing that primarilyconsiders the client?s value and willingness to pay. The value of audit andaccounting services to small sized enterprises is not yet fully investigated, whyit is difficult to implement a value-based strategy.Aim: The aim of this study is to investigate the value of audit and accounting servicesto the small sized enterprises through the study of which attributes theseservices consist of and which priority the small sized enterprises attach to thedifferent attributes.

The purpose of this study is to create a method that can be used to produce decisionsupport data for the climate goals of a municipality. The method should be able to demonstrate the potential for reducing energy use and greenhouse gas emissions for measures aimed at the stationary energy system in the municipality. It will be used to make longterm projections of energy use and greenhouse gas emissions in order to be able to demonstrate the ability to reach climate goals. The aim was also to test the method's applicability by using the municipality of Uppsala and the Uppsala climate protocol project in a case study. Uppsala climate protocol is a project consisting of participants from business, government and organizations that voluntarily want to commit to reducing their carbon footprint by reducing their energy use and thus work to achieve the municipality's overall climate goal. Public reporting of energy use and climate impact has been studied in order to examine the nature of indicators and accounting figures that are commonly used in the field and how long-term forecasts are formulated. In connection to this, the type and sources for the kind of data needed was also examined.

Increasing the use of biofuels is an important part of achieving the EU?s target of 10 percent renewable energy in the transport sector. However, the competition between biofuels and food production is an ongoing concern. Also, several studies have indicated a significantly higher climate impact than was earlier estimated, due to emissions from land use. In Sweden, both the use and production of biofuels from crops have increased substantially during the last decade. The purpose of this project is first to present an overview of the Swedish land use in all sectors.

Hur kan man skapa en fungerande, kostnadseffektiv distributionslösning för direktleverans med en hög servicenivå för att tillfredställa kund- och konsumentbehovet? Problemet kan delas upp i en teoretisk och en praktisk del. Den teoretiska delen är att det inte finns en generell lösning på problemet. Det praktiska problemet är att företaget vi studerar, Lifebox, idag inte har någon lösning.Syfte Huvudsyftet med examensarbetet är att ge Lifebox förutsättningar för en fungerande, kostnadseffektiv distributionslösning med direktleverans med en hög servicenivå för att tillfredställa kund- och konsumentbehovet. Vi har också definierat ett delsyfte vilket är att skapa förståelse för de krav, behov och förväntningar som finns i Lifebox och dess intressenter.Metod För att uppfylla detta syfte måste vi använda oss av en metod som möjliggör att vi kan studera ett projekt i förändring och som samtidigt ger en lösning som knyter an till verkligheten i ett så brett perspektiv som möjligt.

The situation at Plastal AB is following; the plant in Simrishamn has not capacity enough but the plant in Kristinehamn has unused capacity. My task with this master thesis is to build a logistic flow between this two plants, optimize purchase quantities and ensure delivery safety.The production of the Intermediate Section (LS) will be divided between the plants. The LS will be produced in the following way; the injection moulding process will be done in Simrishamn and the assembling and lacquering processes in Kristinehamn, The reason to divide the production is to ensure delivery safety. Plastal AB can not move the whole production of the l.S because the two plants have different processes (moulding res. injection moulding).When the 1.5 has been transported to Kristinehamn following moments are included in this order; lacquering, welding and assembling.