Behavioral problems are one of the leading reasons for re-homing and euthanasia in dogs. It is estimated that between 40 ? 87 % of dogs suffer from some sort of behavioural problem, making it an important animal welfare issue. Separation anxiety is one of the most common behavior problems encountered in dogs after problems related to aggression. This thesis is aimed at examining the etiology behind separation anxiety related behavior in dogs based on existing literature as well as comparing and evaluating the efficiency on suggested treatment protocols.

The technological legacy from the early electrification of the Swedish railroads has resulted in a power grid with a lower grid frequency than the national power grid from which it is fed. Energy transfer between these power grids with different frequencies requires substations, adapting the grid frequency for the rail road power grid. For this purpose, a feeding power grid has been built, stretching across the country from Boden in the north to Tälle/Häggvik in the south.Power transfer in the Swedish power grid results in voltage angle differences which increase with increasing loads and transfer distance. These voltage angle differences are transferred from the power feeding substations to the rail road power grid, will in some extent cause loss of energy due to unwanted power flows from north to south.To minimize the losses due to this phenomenon, a power management system called EFS 132 kV has been developed and implemented. The system minimizes the unwanted power flows and controls the desired power flow for a good distribution of loads between the power feeding substations.This thesis investigates the extent of the transmission losses avoided due to the EFS 132 kV that coordinates the idling angles to a common reference point.The results indicate that EFS 132 kV affects the power flow, especially between the northern substations through an improved load distribution.

This report is the result of a master thesis at Linköping University - Institute of Technology and Uppsala University at the request of the chassi workshop at Scania CV AB in Södertälje. Since the beginning of the 90's, Scania CV AB has had a close cooperation with Toyota from which, among other things, the Scania Production System (SPS) has evolved. SPS explains Scanias' values, principles and priorities. The Technician department (MST) at Scania Chassi in Södertälje believes that SPS can streamline the technicians work and help them become a more homogeneous group. The purpose of this master thesis is to initiate an implementation of SPS within MST through two pilot projects involving both the product and process technicians. The SPS principle Normal Situation - Standardised working method was required to be implemented within one work task each for the two groups of technicians with special attention on the three subprinciples Standardisation, Takt and Balanced flow. The master thesis fulfilled its purpose as the two pilot projects initiated the implementation of SPS within MST and the three sub-principles Standardisation, Takt and Balanced flow were implemented within the two chosen work tasks.

Milk allergens were digested by allowing them to flow through a chromatography column, where pepsin was conjugated to the stationary phase of the column. The allergen fragments were then characterized both biochemically, by using SDS-PAGE and gel permeation chromatography, and immunologically, by examining their reactivity to IgE and monoclonal antibodies..

It has become more common for organization to operate a lot of projects at the same time. These projects affect each other, either in way of resources or technical. Projects in a multi-project environment depend and affect each other, and in most cases they rival about resources, decision-makings and priority. To lead a project portfolio with several projects is a major challenge. The most common problems that occur are vague objective, unclear working conditions, resource shortage and problems of priority.

According to ?Fotförbundet" (2012), Overpronation occurs frequently (80 %) in the Western World and furthermore overpronation of calcaneus influences the position of the pelvic and thorax (Fotförbundet, 2012; Behnke, 2008). The aim of this study is to investigate whether or not it is possible to connect overpronation of calcaneus to the problem in the rider?s seat as observed by the instructors of Strömsholm. The study will also investigate if the riders seat problems as noticed by the riding instructors are comparable with the problems found by the analyst during testing. One purpose with the study is to raise the instructors and riders awareness that anatomical deviations in the rider might influence the rider?s position in the saddle. The questions of the study are: - Is it possible to see seat problems in riders with overpronation of calcaneus? - If it is possible to see more seat problems in riders with overpronation of calcaneus, do the instructors in the study considers the seat problems be similar with each other? - If there are seat problems in the study, is it the same according to the instructors and the analyst in human biomechanics? The hypothesis of the study is that overpronation of calcaneus has an effect of the rider?s position in the saddle. The study is conducted as a blind study where the test subjects have been filmed (from knees down) as they walked barefooted and later while riding.

Dust that arises during the construction process is called ?construction dust?.People who are exposed for construction dust for a long period of time are atrisk to develop several forms of lung problems, allergies and cancer. Todayconstruction dust is a huge problem during the production in Skanska´srenovation projects. Every day workers are exposed of the unhealthyconstruction dust and it can cause lung problems and diseases after 10-30years. This is a problem that must be taken into account to obtain a betterworking environment on Skanska´s building sites.Skanska Sweden AB has given two students the task to investigate possibleproblems about the spreading of construction dust.

This paper is a study about outdoor education in pre- school. The main purpose is to look over if outdoor education in pre- school is a restraint or a resource. The study is based on two questionnaires, one to personnel in pre- school and one to parents who have children in pre- school. The study showed that outdoor education is mostly viewed to be a resource but there can be some problems in how to use it. Time, planning and knowledge were problems that were often mentioned by teachers.

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

The problem of separating a non-rectangular foreground image from a background image is a classical problem in image processing and analysis, known as matting or keying. A common example is a film frame where an actor is extracted from the background to later be placed on a different background. Compositing of these objects against a new background is one of the most common operations in the creation of visual effects. When the original background is of non-constant color the matting becomes an under determined problem, for which a unique solution cannot be found. This thesis describes a framework for computing mattes from images with backgrounds of non-constant color, using Bayesian statistics.

Aim with this literature review is to acqurie knowledge in medical, psychical, psychological and social problems evolving urine incontinence and it´s treatment metods, current legislations and the nurse´s approach towards the patient and transcultural care if the patient comes from another cultural.The results show that this problem affects the women´s life situation enormously above all it brings them a increased social isolation, helpless, sheme, psychological and sexual problems.the nurse should recognise demands and resource with the.by support of diagnostic care, patients can achive good health when there is enough resource patient to be able to support her in her efforts to achive balance i her daily life..

Heat, clock scew and frequency optimization are some of the problems a semiconductor designer must face. By splitting a synchrounous block into multiple pieces which comunicates asynchronously with eachother and provide them with independent clocks, these problems may be reduced. GALS (Global Asynchronous Local Synchronous) is a wrapper that wraps a synchronous block and provides it with a clock. Multiple GALS-elements will make the whole system. The clockfrequency may be independently adjusted between each block.

This paper is based on a literature review and interviews made with managers in small-scale nurseries for pot plant production. The review helped to identify the worst occupational hazards in pot plant production. The interviews provided a way to investigate how the nurseries act so as to avoid the worst hazards and what they do to even out work intensive periods during the season in order to get a more even distribution of work over the year. According to available statistics problems with back and shoulders are the most common of the physical disorders and the risk for occupational accidents are high for greenhouse workers. Most of the occupational injuries are connected to musculoskeletal problems. The handling of material is often manual and involves frequent lifting and carrying of heavy loads, the strenuous work postures and static muscular tensions these repetitive tasks are associated with causes straining and overloading.

This bachelor thesis concerns a region in central Turkey ? Cappadocia - and its need of a sustainable tourism development. A town called Ürgüp is located in the centre of this region, which mainly consist of a rich geographic, cultural and historic access.Our focus in this essay will be concerning Ürgüp and the importance of a sustainable tourism development. Our intensions are to examine what Ürgüp has to offer as a tourist locality and how Ürgüp can maximise its visitors through a sustainable development. We also examine how the locality can be developed in a tourist perspective.