This report is a thesis on requests from Sandvik Mining and Construction (SMC) in autumn of 2012. The goal of this work was to study the feasibility of creating and implementing an Equalized preventive maintenance program in SMC maintenance operations and reduce downtime for preventive maintenance (PM). To investigate whether this was possible, the authors studied the current procedures for the PM. The authors have collected and analyzed all relevant information within the maintenance department reporting system as well as through interviews determined whether it is practical to introduce a Equalized PM programs. The authors had also studied the possibilities to entrust part of the maintenance work to the operators of the machine cells.

In the thesis we have shown that it is possible with current technology, to buildneighborhoods that are largely self-sufficient. We have obtained some information aboutongoing work in the field of energy efficient buildings and active house which we have usedto develop a model. The Feasibility study for Ranagård we have e.g been forced tofollow laws on groundwater covered, resulting in the construction of basements for singlefamilyhome is not possible. The model that we have built up overtime has been the central part of the work. The model illustrates very well what an activehouse neighborhood means and potential of such an area.

This report describes the scientific work of designing and manufacturing an intelligent controller module prototype for automobile trailer connections. The functions of the module are both to drive the lamps and detect failures. The module also contains functions to handle other functions of the trailer. To learn about controller modules the group does extensive Feasibility study.The group receives three already existing modules, the functions of the three modules are studied and tested in the lab, this is done too get a overview of the construction. The method used I called reversed engineering, a way of constructing by analyzing constructions already done.When the modules are analyzed, the functions of the prototype are tested and designed without copying the analyzed modules.

This report describes the process of outlining a design proposal for a resource planning tool for TV post-production. A Feasibility study in form of a participant observation has been carried out on-site, which has resulted in a requirement specification. Based on the requirement specification, mockups have been created to illustrate the functions and features that a final planning tool should have. In addition to developing a design proposal, an evaluation of the existing resource planning tool Ganttic has been conducted. Ganttic has been reviewed based on how well it meets the list of requirements.

Internet  has  given  possibilities  to  a  whole  new world within communication. Nowadays  the communication  inside organisations and companies  takes place  through  the Internet. The  idea  of  this paper  arose when one of  the  authors discussed  the  general  involvement of  the  tenant-owner?s association  in  the committee. Providing a new channel  for  communication  through a homepage  could  affect  the  attitude  of  the  tenants.  We  were  curious  of  what  effect  on communication  introducing a homepage would give.

The district heating load is seasonally dependent, with a low load during periods of high ambient temperature. Thermal energy storage (TES) has the potential to shift heating loads from winter to summer, thus reducing cost and environmental impact of District Heat production. In this study, a concept of high temperature borehole thermal energy storage (HT-BTES) together with a pellet heating plant for temperature boost, is presented and evaluated by its technical limitations, its ability to supply heat, its function within the district heating system, as well as its environmental impact and economic viability in Gothenburg, Sweden, a city with access to high quantities of waste heat.The concept has proven potentially environmentally friendly and potentially profitable if its design is balanced to achieve a good enough supply temperature from the HT-BTES. The size of the heat storage, the distance between boreholes and low borehole thermal resistance are key parameters to achieve high temperature. Profitability increases if a location with lower temperature demand, as well as risk of future shortage of supply, can be met.

Övervakningssystem har haft en viktig roll i samhället under en lång period. Syftet med dessa systemen har inte ändrats, det är alltid säkerhetsaspekten som har varit huvudpunkten. Effektiviteten på ett övervakningssystem beror oftast på den mänskliga faktorn, någon måste bearbeta bildflödet som spelas in för att dra definitiva slutsatser. Under senare år har dessa övervakningssystem, i takt med teknologins utveckling, blivit mer intelligenta. Metoder som tillämpar automatisk analysering av en given bild har introducerats, vissa av dessa tekniker har redan hunnit bli en standard. Denna studie ska utveckla en prototyp som använder sig av tekniken och stresstesta för att identifiera eventuella brister.

Vattenfall Heat AB is a district heat provider in Drefviken, but has yet to establish any cooling systems in this area. This thesis examines the potential client base within the area today and over the coming 20 years. The feasibility of the most common cooling technologies is evaluated and results show a total potential for an installed capacity of 30 MW providing 50 GWh of cooling per year. One of the examined areas shows good prospect for heat driven absorption chillers during the summer months when the heat load is limited..

This study deals with the technical and economic feasibility of replacing the nuclear power plant reactor Ringhals 3 with a biofuel power plant. A technical investigation has been executed to determine which of the systems and components that could be reused and which ones would need to be replaced. The investment costs of the reconstruction have also been estimated. The cost of the electricity production has been calculated as well as the emissions of the new biofuel power plant. Based on the established rate of return, the lowest average spot price of electricity that makes the investment profitable has been calculated.

Given that the oil prices have risen and the environmental regulations has become more stringent, the interest in operating efficiency has increased. The project has investigated the possibility of producing electricity from waste heat generated in the diesel process. One technique to utilize and convert energy into electricity is the ORC (Organic Rankine Cycle). This process is based on the Rankine process (the steam process), the difference from the traditional Rankine process is that instead of water as a working medium, an organic substance is used. The main component used in the process is a evaporator, a turbine, a condenser and a pump.

This thesis aims to develop proposals and models for a modular electronics construction to a future D250S Dual battery charger. The aim also includes investigation of possibilities to use some of Texas Instruments C2000 microprocessors. The reason for this is that CTEK SWEDEN AB wants to renew the present D250S Dual battery charger and lower the manufacturing costs. The thesis work has involved gathering theoretical facts for the development of a design on the modular electronic construction, the choice on which microprocessor to use, the choice of electronic components and facts about peripheral equipment to the D250S Dual. With the theoretical there has been developed different solutions to the proposed hardware and software solutions with comparisons in aspects of positive and negative.

Recent turmoil surrounding nuclear power as an energy source, especially since the accidentat Fukushima, has largely contributed to the debate of whether or not nuclear power should beused as an energy source. This study has examined the economic feasibility of replacingForsmark?s 3rd nuclear reactor with a bio fueled power plant, and find out how this could bedone.The power generation that has to be replaced is equal to 1170 MWe. To replace this, 6 largescaleCFB-boilers, each providing over 200 MWe, were necessary. In addition to this, eachboiler required their respective turbine sets, comprising one high-pressure-, and one lowpressureturbine with intermediate reheating capacities.Based on this, a rankine-cycle was modeled using the software EES, to be able to calculatethe total heat required in the power plant.

Internet's entry into our home has changed our communication capabilities. As a result more and more services in the digital world are available. Besides e.g. shopping, gaming and general information, different social networks now offer preventive and therapeutic health-oriented services. When being asked by several young people, with whom I have been working in a clinical setting, to offer conversations over the Internet that enables both to see and to hear each other in real time, I decided to conduct a pilot study which is presented in this paper. The aim was to investigate the feasibility of offering supportive therapy using video calls over the Internet.

Free Space Optics (FSO) has received a great deal of attention lately both in the military and civilian information society due to its potentially high capacity, rapid deployment, portability and high security from deception and jamming. The main issue is that severe weather can have a detrimental impact on the performance, which may result in an inadequate availability. This report contains a Feasibility study for an all-optical free-space link intended for short-range communication (200-500 m). Laboratory tests have been performed to evaluate the link design. Field tests were made to investigate availability and error performance under the influence of different weather conditions.

The agricultural sector is currently highly dependent on fossil fuels, with diesel beingmost prominent. There are however both historical and modern alternatives thathave not been subject to enough evaluation to disregard them as suitable alternative.This report aims to theoretically investigate the feasibility of converting aconventional diesel driven tractor to run on electricity, delivered via a cableconnected to either the main power grid or on-site electric production, such asphotovoltaic. Delivering electricity to the machine via a cable is a method withhistorical roots in the early 20th century and in the present day mining industry.The economic and technological potential of the technique are evaluated, along withthe examination of several different motor powers, voltages, losses and constructionideas. The report finds the technique to be both possible as well as long termeconomically and environmentally beneficial. To realise this method however, somedeviations from the present methods of agricultural farming must be made,considering the more advanced driving patterns, the limited mobility and therequirement for extra driver awareness.